@@ -3,7 +3,7 @@
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : should be "efm32,i2c"
+ - compatible : should be "energymicro,efm32-i2c"
- interrupts : the interrupt number
- clocks : reference to the module clock
@@ -17,12 +17,12 @@ Example:
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "efm32,i2c";
+ compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
- status = "disabled";
+ status = "ok";
efm32,location = <3>;
eeprom@50 {
Fix dt compatible string in the binding document which was changed during review in the driver, but it seem I messed up to adapt the documentation accordingly. Also change status from "disabled" to "ok" which makes more sense for an example. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- Documentation/devicetree/bindings/i2c/i2c-efm32.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)