Message ID | 1396492834-26035-1-git-send-email-dinguyen@altera.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi! On Wed, Apr 02, 2014 at 09:40:33PM -0500, dinguyen@altera.com wrote: > From: Dinh Nguyen <dinguyen@altera.com> > > The Altera Cyclone5 and Arria5 devkit has an EEPROM, LCD and a RTC on the > board. This patch adds support for them. > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > --- > arch/arm/boot/dts/socfpga_arria5_socdk.dts | 22 ++++++++++++++++++++++ > arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 22 ++++++++++++++++++++++ > 2 files changed, 44 insertions(+) > > diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts > index 88e4a8e..674dcf8 100644 > --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts > +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts > @@ -59,3 +59,25 @@ > rxdv-skew-ps = <0>; > rxc-skew-ps = <2000>; > }; > + > +&i2c0 { > + status = "okay"; > + lcd: lcd@28 { > + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; > + reg = <0x28>; > + height = <2>; > + width = <16>; > + brightness = <8>; > + }; I would prefer if we have the display in an extra patch. This seems simple and okay, but everybody should get a chance to at least discuss this new binding+driver instead of just "hiding" it in this patch. > + > + eeprom@51 { > + compatible = "atmel,24c32"; > + reg = <0x51>; > + pagesize = <32>; > + }; > + > + rtc@68 { > + compatible = "dallas,ds1339"; > + reg = <0x68>; > + }; > +}; > diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > index 5e9445a..0d85021 100644 > --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > @@ -52,3 +52,25 @@ > rxdv-skew-ps = <0>; > rxc-skew-ps = <2000>; > }; > + > +&i2c0 { > + status = "okay"; > + lcd: lcd@28 { > + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; > + reg = <0x28>; > + height = <2>; > + width = <16>; > + brightness = <8>; > + }; > + > + eeprom@51 { > + compatible = "atmel,24c32"; > + reg = <0x51>; > + pagesize = <32>; > + }; > + > + rtc@68 { > + compatible = "dallas,ds1339"; > + reg = <0x68>; > + }; > +}; > -- > 1.7.9.5 > > The rest looks okay. Regards, Steffen
On Thu, 2014-04-03 at 07:19 +0200, Steffen Trumtrar wrote: > Hi! > > On Wed, Apr 02, 2014 at 09:40:33PM -0500, dinguyen@altera.com wrote: > > From: Dinh Nguyen <dinguyen@altera.com> > > > > The Altera Cyclone5 and Arria5 devkit has an EEPROM, LCD and a RTC on the > > board. This patch adds support for them. > > > > Signed-off-by: Dinh Nguyen <dinguyen@altera.com> > > --- > > arch/arm/boot/dts/socfpga_arria5_socdk.dts | 22 ++++++++++++++++++++++ > > arch/arm/boot/dts/socfpga_cyclone5_socdk.dts | 22 ++++++++++++++++++++++ > > 2 files changed, 44 insertions(+) > > > > diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts > > index 88e4a8e..674dcf8 100644 > > --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts > > +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts > > @@ -59,3 +59,25 @@ > > rxdv-skew-ps = <0>; > > rxc-skew-ps = <2000>; > > }; > > + > > +&i2c0 { > > + status = "okay"; > > + lcd: lcd@28 { > > + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; > > + reg = <0x28>; > > + height = <2>; > > + width = <16>; > > + brightness = <8>; > > + }; > > I would prefer if we have the display in an extra patch. > This seems simple and okay, but everybody should get a chance to at least > discuss this new binding+driver instead of just "hiding" it in this patch. > You're right. I forgot that the driver for this LCD display is not even upstreamed yet. Thanks, Dinh > > + > > + eeprom@51 { > > + compatible = "atmel,24c32"; > > + reg = <0x51>; > > + pagesize = <32>; > > + }; > > + > > + rtc@68 { > > + compatible = "dallas,ds1339"; > > + reg = <0x68>; > > + }; > > +}; > > diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > > index 5e9445a..0d85021 100644 > > --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > > +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts > > @@ -52,3 +52,25 @@ > > rxdv-skew-ps = <0>; > > rxc-skew-ps = <2000>; > > }; > > + > > +&i2c0 { > > + status = "okay"; > > + lcd: lcd@28 { > > + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; > > + reg = <0x28>; > > + height = <2>; > > + width = <16>; > > + brightness = <8>; > > + }; > > + > > + eeprom@51 { > > + compatible = "atmel,24c32"; > > + reg = <0x51>; > > + pagesize = <32>; > > + }; > > + > > + rtc@68 { > > + compatible = "dallas,ds1339"; > > + reg = <0x68>; > > + }; > > +}; > > -- > > 1.7.9.5 > > > > > > The rest looks okay. > > Regards, > Steffen >
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts index 88e4a8e..674dcf8 100644 --- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts @@ -59,3 +59,25 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + lcd: lcd@28 { + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; + reg = <0x28>; + height = <2>; + width = <16>; + brightness = <8>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts index 5e9445a..0d85021 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts @@ -52,3 +52,25 @@ rxdv-skew-ps = <0>; rxc-skew-ps = <2000>; }; + +&i2c0 { + status = "okay"; + lcd: lcd@28 { + compatible = "newhaven,nhd-0216k3z-nsw-bbw"; + reg = <0x28>; + height = <2>; + width = <16>; + brightness = <8>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +};