diff mbox

[2/4] ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator

Message ID 1396880967-16319-2-git-send-email-l.stach@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Lucas Stach April 7, 2014, 2:29 p.m. UTC 
From: Sascha Hauer <s.hauer@pengutronix.de>

GPIO7_12 switches the D+/D- USB lines on and off. When we use this as
VBUS regulator it means that USB device mode can never work as VBUS is
never turned on in Device mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 39ffa766384f..af32944cf9ae 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -40,13 +40,15 @@ 
 			regulator-always-on;
 		};
 
-		reg_usb_otg_vbus: regulator@1 {
+		reg_usb_otg_switch: regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
-			regulator-name = "usb_otg_vbus";
+			regulator-name = "usb_otg_switch";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio7 12 0>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		reg_usb_host1: regulator@2 {
@@ -348,7 +350,6 @@ 
 };
 
 &usbotg {
-	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;