diff mbox

[v2] ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees

Message ID 1396972276-11549-1-git-send-email-galak@codeaurora.org (mailing list archive)
State New, archived
Headers show

Commit Message

Kumar Gala April 8, 2014, 3:51 p.m. UTC
Add basic IPQ8064 SoC include device tree and support for basic booting on
the AP148 Reference board.  Also, keep dtb build list and qcom_dt_match in
sorted order.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
v2:
* created a v1.0 ipq8064.dtsi to handle differences in Si rev in future
* changed /include/ to #include
* fixed timer freq to be 25Mhz instead of 27Mhz (copied from msm8960)
* added PMU node
* dropped interrupts from cpus node, not currently part of binding

 arch/arm/boot/dts/Makefile               |   8 +-
 arch/arm/boot/dts/qcom-ipq8064-ap148.dts |  12 +++
 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi |   1 +
 arch/arm/boot/dts/qcom-ipq8064.dtsi      | 125 +++++++++++++++++++++++++++++++
 arch/arm/mach-qcom/board.c               |   4 +-
 5 files changed, 146 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064.dtsi

Comments

Stanimir Varbanov April 8, 2014, 9:36 p.m. UTC | #1
Hi Kumar,

<snip>

> diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> new file mode 100644
> index 0000000..5e6f456
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
> @@ -0,0 +1,12 @@
> +#include "qcom-ipq8064-v1.0.dtsi"
> +
> +/ {
> +	model = "Qualcomm IPQ8064/DB149";
> +	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";

The patch subject saying AP148, and here AP149. Which is the wrong one?

> +
> +	soc {
> +		serial@16340000 {
> +			status = "ok";
> +		};
> +	};
> +};
> diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> new file mode 100644
> index 0000000..7093b07
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
> @@ -0,0 +1 @@
> +#include "qcom-ipq8064.dtsi"
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> new file mode 100644
> index 0000000..8ca3b51
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi

<snip>

> +
> +		intc: interrupt-controller@2000000 {
> +			compatible = "qcom,msm-qgic2";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			reg = < 0x02000000 0x1000 >,
> +			      < 0x02002000 0x1000 >;

extra spaces around these numbers

regards,
Stan
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4a89023..0591ed0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -231,9 +231,11 @@  dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	dra7-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
-	qcom-msm8960-cdp.dtb \
-	qcom-apq8074-dragonboard.dtb
+dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8074-dragonboard.dtb \
+	qcom-ipq8064-ap148.dtb \
+	qcom-msm8660-surf.dtb \
+	qcom-msm8960-cdp.dtb
 dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
new file mode 100644
index 0000000..5e6f456
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,12 @@ 
+#include "qcom-ipq8064-v1.0.dtsi"
+
+/ {
+	model = "Qualcomm IPQ8064/DB149";
+	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
+
+	soc {
+		serial@16340000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
new file mode 100644
index 0000000..7093b07
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1 @@ 
+#include "qcom-ipq8064.dtsi"
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
new file mode 100644
index 0000000..8ca3b51
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,125 @@ 
+/dts-v1/;
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+/ {
+	model = "Qualcomm IPQ8064";
+	compatible = "qcom,ipq8064";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "qcom,krait";
+		enable-method = "qcom,kpss-acc-v1";
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			interrupts = <0 2 0x4>;
+		};
+	};
+
+	cpu-pmu {
+		compatible = "qcom,krait-pmu";
+		interrupts = <1 10 0x304>;
+	};
+
+	soc: soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+
+		intc: interrupt-controller@2000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = < 0x02000000 0x1000 >,
+			      < 0x02002000 0x1000 >;
+		};
+
+		timer@200a000 {
+			compatible = "qcom,kpss-timer", "qcom,msm-timer";
+			interrupts = <1 1 0x301>,
+				     <1 2 0x301>,
+				     <1 3 0x301>;
+			reg = <0x0200a000 0x100>;
+			clock-frequency = <25000000>,
+					  <32768>;
+			cpu-offset = <0x80000>;
+		};
+
+		acc0: clock-controller@2088000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		acc1: clock-controller@2098000 {
+			compatible = "qcom,kpss-acc-v1";
+			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+		};
+
+		saw0: regulator@2089000 {
+			compatible = "qcom,saw2";
+			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		saw1: regulator@2099000 {
+			compatible = "qcom,saw2";
+			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+			regulator;
+		};
+
+		serial@12490000 {
+			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+			reg = <0x12490000 0x1000>,
+			      <0x12480000 0x1000>;
+			interrupts = <0 195 0x0>;
+			clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		serial@16340000 {
+			compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+			reg = <0x16340000 0x1000>,
+			      <0x16300000 0x1000>;
+			interrupts = <0 152 0x0>;
+			clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
+		qcom,ssbi@500000 {
+			compatible = "qcom,ssbi";
+			reg = <0x00500000 0x1000>;
+			qcom,controller-type = "pmic-arbiter";
+		};
+
+		gcc: clock-controller@900000 {
+			compatible = "qcom,gcc-ipq8064";
+			reg = <0x00900000 0x4000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
index bae617e..cb3c07c 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -15,9 +15,11 @@ 
 #include <asm/mach/arch.h>
 
 static const char * const qcom_dt_match[] __initconst = {
+	"qcom,apq8074-dragonboard",
+	"qcom,ipq8062",
+	"qcom,ipq8064",
 	"qcom,msm8660-surf",
 	"qcom,msm8960-cdp",
-	"qcom,apq8074-dragonboard",
 	NULL
 };