diff mbox

[v3,08/13] ARM: dts: add hip04-d01 dts file

Message ID 1397801156-25682-9-git-send-email-haojian.zhuang@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Haojian Zhuang April 18, 2014, 6:05 a.m. UTC
Add hip04.dtsi & hip04-d01.dts file to support HiP04 SoC platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 Documentation/devicetree/bindings/arm/gic.txt      |   1 +
 .../bindings/arm/hisilicon/hisilicon.txt           |  10 +
 .../devicetree/bindings/clock/hip04-clock.txt      |  20 ++
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/hip04-d01.dts                    |  74 +++++++
 arch/arm/boot/dts/hip04.dtsi                       | 239 +++++++++++++++++++++
 6 files changed, 345 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/hip04-clock.txt
 create mode 100644 arch/arm/boot/dts/hip04-d01.dts
 create mode 100644 arch/arm/boot/dts/hip04.dtsi
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 5573c08..150f7d6 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -16,6 +16,7 @@  Main node required properties:
 	"arm,cortex-a9-gic"
 	"arm,cortex-a7-gic"
 	"arm,arm11mp-gic"
+	"hisilicon,hip04-gic"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index df0a452..4681f15 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -4,6 +4,10 @@  Hisilicon Platforms Device Tree Bindings
 Hi4511 Board
 Required root node properties:
 	- compatible = "hisilicon,hi3620-hi4511";
+HiP04 D01 Board
+Required root node properties:
+	- compatible = "hisilicon,hip04-d01";
+
 
 Hisilicon system controller
 
@@ -19,6 +23,11 @@  Optional properties:
 		If reg value is not zero, cpun exit wfi and go
 - resume-offset : offset in sysctrl for notifying cpu0 when resume
 - reboot-offset : offset in sysctrl for system reboot
+- relocation-entry : relocation address of secondary cpu boot code
+- relocation-size : relocation size of secondary cpu boot code
+- bootwrapper-phys : physical address of boot wrapper
+- bootwrapper-size : size of boot wrapper
+- bootwrapper-magic : magic number for secondary cpu in boot wrapper
 
 Example:
 
@@ -31,6 +40,7 @@  Example:
 		reboot-offset = <0x4>;
 	};
 
+
 PCTRL: Peripheral misc control register
 
 Required Properties:
diff --git a/Documentation/devicetree/bindings/clock/hip04-clock.txt b/Documentation/devicetree/bindings/clock/hip04-clock.txt
new file mode 100644
index 0000000..4d31ae3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hip04-clock.txt
@@ -0,0 +1,20 @@ 
+* Hisilicon HiP04 Clock Controller
+
+The HiP04 clock controller generates and supplies clock to various
+controllers within the HiP04 SoC.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "hisilicon,hip04-clock" - controller compatible with HiP04 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hip04-clock.h>.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f..7119bca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -80,6 +80,7 @@  dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
+dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
new file mode 100644
index 0000000..a10dcf3
--- /dev/null
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -0,0 +1,74 @@ 
+/*
+ *  Copyright (C) 2013-2014 Linaro Ltd.
+ *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "hip04.dtsi"
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "Hisilicon D01 Development Board";
+	compatible = "hisilicon,hip04-d01";
+
+	memory@0 {
+		device_type = "memory";
+		/*
+		 * Bootloader loads kernel image into 0x1000_0000 region,
+		 * so disables the region between [0000_0000 - 1000_0000]
+		 * temporarily.
+		 * Because the PHYS_TO_VIRT_OFFSET is calculated based on
+		 * the original region that kenrel is loaded.
+		 * This workaround will be removed only after UEFI updated.
+		 */
+		reg = <0x00000000 0x10000000 0xc0000000>;
+	};
+
+	memory@00000004c0000000 {
+		device_type = "memory";
+		reg = <0x00000004 0xc0000000 0x40000000>;
+	};
+
+	memory@0000000500000000 {
+		device_type = "memory";
+		reg = <0x00000005 0x00000000 0x80000000>;
+	};
+
+	memory@0000000580000000 {
+		device_type = "memory";
+		reg = <0x00000005 0x80000000 0x80000000>;
+	};
+
+	memory@0000000600000000 {
+		device_type = "memory";
+		reg = <0x00000006 0x00000000 0x80000000>;
+	};
+
+	memory@0000000680000000 {
+		device_type = "memory";
+		reg = <0x00000006 0x80000000 0x80000000>;
+	};
+
+	memory@0000000700000000 {
+		device_type = "memory";
+		reg = <0x00000007 0x00000000 0x80000000>;
+	};
+
+	memory@0000000780000000 {
+		device_type = "memory";
+		reg = <0x00000007 0x80000000 0x80000000>;
+	};
+
+	soc {
+		uart0: uart@4007000 {
+			status = "ok";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
new file mode 100644
index 0000000..7e909ee
--- /dev/null
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -0,0 +1,239 @@ 
+/*
+ * Hisilicon Ltd. HiP01 SoC
+ *
+ * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+#include <dt-bindings/clock/hip04-clock.h>
+
+/ {
+	/* memory bus is 64-bit */
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+			cluster2 {
+				core0 {
+					cpu = <&CPU8>;
+				};
+				core1 {
+					cpu = <&CPU9>;
+				};
+				core2 {
+					cpu = <&CPU10>;
+				};
+				core3 {
+					cpu = <&CPU11>;
+				};
+			};
+			cluster3 {
+				core0 {
+					cpu = <&CPU12>;
+				};
+				core1 {
+					cpu = <&CPU13>;
+				};
+				core2 {
+					cpu = <&CPU14>;
+				};
+				core3 {
+					cpu = <&CPU15>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+		};
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+		};
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+		};
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x100>;
+		};
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x101>;
+		};
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x102>;
+		};
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x103>;
+		};
+		CPU8: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x200>;
+		};
+		CPU9: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x201>;
+		};
+		CPU10: cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x202>;
+		};
+		CPU11: cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x203>;
+		};
+		CPU12: cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x300>;
+		};
+		CPU13: cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x301>;
+		};
+		CPU14: cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x302>;
+		};
+		CPU15: cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x303>;
+		};
+	};
+
+	soc {
+		/* It's a 32-bit SoC. */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus", "simple-bus";
+		device_type = "soc";
+		interrupt-parent = <&gic>;
+		ranges = <0 0 0xe0000000 0x10000000>;
+
+		gic: interrupt-controller@c01000 {
+			compatible = "hisilicon,hip04-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <1 9 0xf04>;
+
+			/* gic dist base, gic cpu base */
+			reg = <0xc01000 0x1000>, <0xc02000 0x1000>,
+			      <0xc04000 0x2000>, <0xc06000 0x2000>;
+		};
+
+		sysctrl: sysctrl {
+			compatible = "hisilicon,sysctrl";
+			reg = <0x3e00000 0x00100000>;
+			relocation-entry = <0xe0000100>;
+			relocation-size = <0x1000>;
+			bootwrapper-phys = <0x10c00000>;
+			bootwrapper-size = <0x10000>;
+			bootwrapper-magic = <0xa5a5a5a5>;
+		};
+
+		fabric: fabric {
+			compatible = "hisilicon,hip04-fabric";
+			reg = <0x302a000 0x1000>;
+		};
+
+		clock: clock {
+			compatible = "hisilicon,hip04-clock";
+			/* dummy register */
+			reg = <0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		dual_timer0: dual_timer@3000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x3000000 0x1000>;
+			interrupts = <0 224 4>;
+			clocks = <&clock HIP04_CLK_50M>;
+			clock-names = "apb_pclk";
+			status = "ok";
+		};
+
+		timer {
+			compatible = "arm,armv7-timer";
+			interrupts = <1 13 0xf08>,
+				     <1 14 0xf08>,
+				     <1 11 0xf08>,
+				     <1 10 0xf08>;
+		};
+
+		uart0: uart@4007000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x4007000 0x1000>;
+			interrupts = <0 381 4>;
+			clocks = <&clock HIP04_CLK_168M>;
+			clock-names = "uartclk";
+			reg-shift = <2>;
+			status = "disabled";
+		};
+	};
+};