From patchwork Tue May 20 09:04:29 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Antoine Tenart X-Patchwork-Id: 4208241 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id CF3B59F23C for ; Tue, 20 May 2014 09:08:28 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id B74F020219 for ; Tue, 20 May 2014 09:08:27 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 61F06202FF for ; Tue, 20 May 2014 09:08:26 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WmfzU-0005XF-3L; Tue, 20 May 2014 09:05:44 +0000 Received: from top.free-electrons.com ([176.31.233.9] helo=mail.free-electrons.com) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wmfym-0003z2-PH for linux-arm-kernel@lists.infradead.org; Tue, 20 May 2014 09:05:02 +0000 Received: by mail.free-electrons.com (Postfix, from userid 106) id 3A11C8BD; Tue, 20 May 2014 11:04:43 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-2.5 required=5.0 tests=BAYES_00,RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from localhost.localdomain (col31-4-88-188-83-94.fbx.proxad.net [88.188.83.94]) by mail.free-electrons.com (Postfix) with ESMTPSA id 65D0D8B1; Tue, 20 May 2014 11:04:42 +0200 (CEST) From: =?UTF-8?q?Antoine=20T=C3=A9nart?= To: sebastian.hesselbarth@gmail.com, tj@kernel.org, kishon@ti.com Subject: [PATCH v4 1/7] phy: add a driver for the Berlin SATA PHY Date: Tue, 20 May 2014 11:04:29 +0200 Message-Id: <1400576675-25265-2-git-send-email-antoine.tenart@free-electrons.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1400576675-25265-1-git-send-email-antoine.tenart@free-electrons.com> References: <1400576675-25265-1-git-send-email-antoine.tenart@free-electrons.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140520_020501_129483_35445FEB X-CRM114-Status: GOOD ( 23.65 ) X-Spam-Score: 0.3 (/) Cc: thomas.petazzoni@free-electrons.com, zmxu@marvell.com, devicetree@vger.kernel.org, =?UTF-8?q?Antoine=20T=C3=A9nart?= , linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, alexandre.belloni@free-electrons.com, jszhang@marvell.com, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP The Berlin SoC has a two SATA ports. Add a PHY driver to handle them. The mode selection can let us think this PHY can be configured to fit other purposes. But there are reasons to think the SATA mode will be the only one usable: the PHY registers are only accessible indirectly through two registers in the SATA range, the PHY seems to be integrated and no information tells us the contrary. For these reasons, make the driver a SATA PHY driver. Signed-off-by: Antoine Ténart Acked-by: Sebastian Hesselbarth --- drivers/phy/Kconfig | 5 + drivers/phy/Makefile | 1 + drivers/phy/phy-berlin-sata.c | 230 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 236 insertions(+) create mode 100644 drivers/phy/phy-berlin-sata.c diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 4906c27fa3bd..b31b1986fda4 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,6 +15,11 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. +config PHY_BERLIN_SATA + bool + depends on ARCH_BERLIN && OF + select GENERIC_PHY + config PHY_EXYNOS_MIPI_VIDEO tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" depends on HAS_IOMEM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 7728518572a4..40278706ac1b 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/phy-berlin-sata.c new file mode 100644 index 000000000000..597f008cae32 --- /dev/null +++ b/drivers/phy/phy-berlin-sata.c @@ -0,0 +1,230 @@ +/* + * Marvell Berlin SATA PHY driver + * + * Copyright (C) 2014 Marvell Technology Group Ltd. + * + * Antoine Ténart + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include + +#define HOST_VSA_ADDR 0x0 +#define HOST_VSA_DATA 0x4 +#define PORT_VSR_ADDR 0x78 +#define PORT_VSR_DATA 0x7c +#define PORT_SCR_CTL 0x2c + +#define CONTROL_REGISTER 0x0 +#define MBUS_SIZE_CONTROL 0x4 + +#define POWER_DOWN_PHY0 BIT(6) +#define POWER_DOWN_PHY1 BIT(14) +#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16) +#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19) + +#define PHY_BASE 0x200 + +/* register 0x01 */ +#define REF_FREF_SEL_25 BIT(0) +#define PHY_MODE_SATA (0x0 << 5) + +/* register 0x02 */ +#define USE_MAX_PLL_RATE BIT(12) + +/* register 0x23 */ +#define DATA_BIT_WIDTH_10 (0x0 << 10) +#define DATA_BIT_WIDTH_20 (0x1 << 10) +#define DATA_BIT_WIDTH_40 (0x2 << 10) + +/* register 0x25 */ +#define PHY_GEN_MAX_1_5 (0x0 << 10) +#define PHY_GEN_MAX_3_0 (0x1 << 10) +#define PHY_GEN_MAX_6_0 (0x2 << 10) + +#define BERLIN_SATA_PHY_NB 2 + +#define to_berlin_sata_phy_priv(desc) \ + container_of((desc), struct phy_berlin_priv, phys[(desc)->index]) + +struct phy_berlin_desc { + struct phy *phy; + u32 val; + unsigned index; +}; + +struct phy_berlin_priv { + void __iomem *base; + spinlock_t lock; + struct phy_berlin_desc phys[BERLIN_SATA_PHY_NB]; +}; + +static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg, u32 reg, + u32 mask, u32 val) +{ + u32 regval; + + /* select register */ + writel(PHY_BASE + reg, ctrl_reg + PORT_VSR_ADDR); + + /* set bits */ + regval = readl(ctrl_reg + PORT_VSR_DATA); + regval &= ~mask; + regval |= val; + writel(regval, ctrl_reg + PORT_VSR_DATA); +} + +static int phy_berlin_sata_power_on(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = to_berlin_sata_phy_priv(desc); + void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80); + int ret = 0; + u32 regval; + + spin_lock(&priv->lock); + + /* Power on PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval &= ~(desc->val); + writel(regval, priv->base + HOST_VSA_DATA); + + /* Configure MBus */ + writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128; + writel(regval, priv->base + HOST_VSA_DATA); + + /* set PHY mode and ref freq to 25 MHz */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x1, 0xff, + REF_FREF_SEL_25 | PHY_MODE_SATA); + + /* set PHY up to 6 Gbps */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x25, 0xc00, PHY_GEN_MAX_6_0); + + /* set 40 bits width */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x23, 0xc00, DATA_BIT_WIDTH_40); + + /* use max pll rate */ + phy_berlin_sata_reg_setbits(ctrl_reg, 0x2, 0x0, USE_MAX_PLL_RATE); + + /* set the controller speed */ + writel(0x31, ctrl_reg + PORT_SCR_CTL); + + spin_unlock(&priv->lock); + + return ret; +} + +static int phy_berlin_sata_power_off(struct phy *phy) +{ + struct phy_berlin_desc *desc = phy_get_drvdata(phy); + struct phy_berlin_priv *priv = to_berlin_sata_phy_priv(desc); + u32 regval; + + spin_lock(&priv->lock); + + /* Power down PHY */ + writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR); + regval = readl(priv->base + HOST_VSA_DATA); + regval |= desc->val; + writel(regval, priv->base + HOST_VSA_DATA); + + spin_unlock(&priv->lock); + + return 0; +} + +static struct phy *phy_berlin_sata_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct phy_berlin_priv *priv = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] >= BERLIN_SATA_PHY_NB)) + return ERR_PTR(-ENODEV); + + return priv->phys[args->args[0]].phy; +} + +static struct phy_ops phy_berlin_sata_ops = { + .power_on = phy_berlin_sata_power_on, + .power_off = phy_berlin_sata_power_off, + .owner = THIS_MODULE, +}; + +static struct phy_berlin_desc desc[] = { + { .val = POWER_DOWN_PHY0 }, + { .val = POWER_DOWN_PHY1 }, + { }, +}; + +static int phy_berlin_sata_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct phy *phy; + struct phy_provider *phy_provider; + struct phy_berlin_priv *priv; + struct resource *res; + int i; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap(dev, res->start, resource_size(res)); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + dev_set_drvdata(dev, priv); + spin_lock_init(&priv->lock); + + for (i = 0; i < BERLIN_SATA_PHY_NB; i++) { + phy = devm_phy_create(dev, &phy_berlin_sata_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + priv->phys[i].phy = phy; + priv->phys[i].val = desc[i].val; + priv->phys[i].index = i; + phy_set_drvdata(phy, &priv->phys[i]); + + /* Make sure the PHY is off */ + phy_berlin_sata_power_off(phy); + } + + phy_provider = + devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct of_device_id phy_berlin_sata_of_match[] = { + { .compatible = "marvell,berlin-sata-phy" }, + { }, +}; + +static struct platform_driver phy_berlin_sata_driver = { + .probe = phy_berlin_sata_probe, + .driver = { + .name = "phy-berlin-sata", + .owner = THIS_MODULE, + .of_match_table = phy_berlin_sata_of_match, + }, +}; +module_platform_driver(phy_berlin_sata_driver); + +MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver"); +MODULE_AUTHOR("Antoine Ténart "); +MODULE_LICENSE("GPL v2");