@@ -28,39 +28,71 @@ static const struct mfd_cell bcm590xx_devs[] = {
},
};
-static const struct regmap_config bcm590xx_regmap_config = {
+static const struct regmap_config bcm590xx_regmap_config_pri = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = BCM590XX_MAX_REGISTER,
+ .max_register = BCM590XX_MAX_REGISTER_PRI,
.cache_type = REGCACHE_RBTREE,
};
-static int bcm590xx_i2c_probe(struct i2c_client *i2c,
+static const struct regmap_config bcm590xx_regmap_config_sec = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = BCM590XX_MAX_REGISTER_SEC,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int bcm590xx_i2c_probe(struct i2c_client *i2c_pri,
const struct i2c_device_id *id)
{
struct bcm590xx *bcm590xx;
int ret;
- bcm590xx = devm_kzalloc(&i2c->dev, sizeof(*bcm590xx), GFP_KERNEL);
+ bcm590xx = devm_kzalloc(&i2c_pri->dev, sizeof(*bcm590xx), GFP_KERNEL);
if (!bcm590xx)
return -ENOMEM;
- i2c_set_clientdata(i2c, bcm590xx);
- bcm590xx->dev = &i2c->dev;
- bcm590xx->i2c_client = i2c;
+ i2c_set_clientdata(i2c_pri, bcm590xx);
+ bcm590xx->dev = &i2c_pri->dev;
+ bcm590xx->i2c_pri = i2c_pri;
- bcm590xx->regmap = devm_regmap_init_i2c(i2c, &bcm590xx_regmap_config);
- if (IS_ERR(bcm590xx->regmap)) {
- ret = PTR_ERR(bcm590xx->regmap);
- dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
+ bcm590xx->regmap_pri = devm_regmap_init_i2c(i2c_pri,
+ &bcm590xx_regmap_config_pri);
+ if (IS_ERR(bcm590xx->regmap_pri)) {
+ ret = PTR_ERR(bcm590xx->regmap_pri);
+ dev_err(&i2c_pri->dev, "primary regmap init failed: %d\n", ret);
return ret;
}
- ret = mfd_add_devices(&i2c->dev, -1, bcm590xx_devs,
+ /* Secondary I2C slave address is the base address with A(2) asserted */
+ bcm590xx->i2c_sec = i2c_new_dummy(i2c_pri->adapter,
+ i2c_pri->addr | BIT(2));
+ if (IS_ERR_OR_NULL(bcm590xx->i2c_sec)) {
+ dev_err(&i2c_pri->dev, "failed to add secondary I2C device\n");
+ return -ENODEV;
+ }
+ i2c_set_clientdata(bcm590xx->i2c_sec, bcm590xx);
+
+ bcm590xx->regmap_sec = devm_regmap_init_i2c(bcm590xx->i2c_sec,
+ &bcm590xx_regmap_config_sec);
+ if (IS_ERR(bcm590xx->regmap_sec)) {
+ ret = PTR_ERR(bcm590xx->regmap_sec);
+ dev_err(&bcm590xx->i2c_sec->dev,
+ "secondary regmap init failed: %d\n", ret);
+ goto err;
+ }
+
+ ret = mfd_add_devices(&i2c_pri->dev, -1, bcm590xx_devs,
ARRAY_SIZE(bcm590xx_devs), NULL, 0, NULL);
- if (ret < 0)
- dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
+ if (ret < 0) {
+ dev_err(&i2c_pri->dev, "failed to add sub-devices: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+err:
+ i2c_unregister_device(bcm590xx->i2c_sec);
return ret;
}
@@ -19,12 +19,15 @@
#include <linux/regmap.h>
/* max register address */
-#define BCM590XX_MAX_REGISTER 0xe7
+#define BCM590XX_MAX_REGISTER_PRI 0xe7
+#define BCM590XX_MAX_REGISTER_SEC 0xf0
struct bcm590xx {
struct device *dev;
- struct i2c_client *i2c_client;
- struct regmap *regmap;
+ struct i2c_client *i2c_pri;
+ struct i2c_client *i2c_sec;
+ struct regmap *regmap_pri;
+ struct regmap *regmap_sec;
unsigned int id;
};
BCM590xx utilizes a secondary I2C slave address to access additional register space. Add support for the secondary address space by instantiating a dummy I2C device with the appropriate secondary I2C slave address. Also expose a secondary regmap register space so that MFD drivers can access this secondary i2c slave address space. Signed-off-by: Matt Porter <mporter@linaro.org> --- drivers/mfd/bcm590xx.c | 60 +++++++++++++++++++++++++++++++++----------- include/linux/mfd/bcm590xx.h | 9 ++++--- 2 files changed, 52 insertions(+), 17 deletions(-)