From patchwork Mon Jun 9 09:37:47 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Javier Martinez Canillas X-Patchwork-Id: 4321131 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id AC3789F79B for ; Mon, 9 Jun 2014 09:41:29 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 11F312021B for ; Mon, 9 Jun 2014 09:41:28 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 75F78201F4 for ; Mon, 9 Jun 2014 09:41:26 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wtw2l-0006w3-KT; Mon, 09 Jun 2014 09:39:07 +0000 Received: from bhuna.collabora.co.uk ([93.93.135.160]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wtw2X-0006o0-0W for linux-arm-kernel@lists.infradead.org; Mon, 09 Jun 2014 09:38:55 +0000 Received: from [127.0.0.1] (localhost [127.0.0.1]) (Authenticated sender: javier) with ESMTPSA id 36222601C32 From: Javier Martinez Canillas To: Lee Jones Subject: [PATCH 2/5] regulator: Add driver for Maxim 77802 PMIC regulators Date: Mon, 9 Jun 2014 11:37:47 +0200 Message-Id: <1402306670-17041-3-git-send-email-javier.martinez@collabora.co.uk> X-Mailer: git-send-email 2.0.0.rc2 In-Reply-To: <1402306670-17041-1-git-send-email-javier.martinez@collabora.co.uk> References: <1402306670-17041-1-git-send-email-javier.martinez@collabora.co.uk> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140609_023853_712998_F57826A9 X-CRM114-Status: GOOD ( 21.62 ) X-Spam-Score: -0.7 (/) Cc: Alessandro Zummo , Kukjin Kim , Mike Turquette , Samuel Ortiz , Tomeu Vizoso , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Liam Girdwood , Doug Anderson , linux-samsung-soc@vger.kernel.org, Sjoerd Simons , Mark Brown , Olof Johansson , Javier Martinez Canillas , linux-arm-kernel@lists.infradead.org, Daniel Stone X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-2.5 required=5.0 tests=BAYES_00,RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The MAX77802 PMIC has 10 high-efficiency Buck and 32 Low-dropout (LDO) regulators. This patch adds support for all these regulators found on the MAX77802 PMIC and is based on a driver added by Simon Glass to the Chrome OS kernel 3.8 tree. Signed-off-by: Javier Martinez Canillas --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77802.c | 678 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 688 insertions(+) create mode 100644 drivers/regulator/max77802.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 789eb46..17873d3 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -377,6 +377,15 @@ config REGULATOR_MAX77693 and one current regulator 'CHARGER'. This is suitable for Exynos-4x12 chips. +config REGULATOR_MAX77802 + tristate "Maxim 77802 regulator" + depends on MFD_MAX77802 + help + This driver controls a Maxim 77802 regulator + via I2C bus. The provided regulator is suitable for + Exynos-5 chips to control various voltages. It includes + support for control of voltage and ramp speed. + config REGULATOR_MC13XXX_CORE tristate diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index d461110..2aea4b6 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o +obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c new file mode 100644 index 0000000..93e8f69 --- /dev/null +++ b/drivers/regulator/max77802.c @@ -0,0 +1,678 @@ +/* + * max77802.c - Regulator driver for the Maxim 77802 + * + * Copyright (C) 2013-2014 Google, Inc + * Simon Glass + * + * Copyright (C) 2012 Samsung Electronics + * Chiwoong Byun + * Jonghwa Lee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * This driver is based on max8997.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Default ramp delay in case it is not manually set */ +#define MAX77802_RAMP_DELAY 100000 /* uV/us */ + +#define MAX77802_OPMODE_SHIFT_LDO 6 +#define MAX77802_OPMODE_BUCK234_SHIFT 4 +#define MAX77802_OPMODE_MASK 0x3 + +#define MAX77802_VSEL_MASK 0x3F +#define MAX77802_DVS_VSEL_MASK 0xFF + +#define MAX77802_RAMP_RATE_MASK_2BIT 0xC0 +#define MAX77802_RAMP_RATE_SHIFT_2BIT 6 +#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0 +#define MAX77802_RAMP_RATE_SHIFT_4BIT 4 + +/* LDO16, LDO22 and LDO31 are not available on MAX77802 */ +#define MAX77802_MAX_REGULATORS (MAX77802_REG_MAX - 3) + +/* MAX77802 has two register formats: 2-bit and 4-bit */ +static const unsigned int ramp_table_77802_2bit[] = { + 12500, + 25000, + 50000, + 100000, +}; + +static unsigned int ramp_table_77802_4bit[] = { + 1000, 2000, 3030, 4000, + 5000, 5880, 7140, 8330, + 9090, 10000, 11110, 12500, + 16670, 25000, 50000, 100000, +}; + +struct max77802_regulator_prv { + int num_regulators; + struct regulator_dev *rdev[MAX77802_MAX_REGULATORS]; + unsigned int opmode[MAX77802_MAX_REGULATORS]; +}; + +static int max77802_get_opmode_shift(int id) +{ + if (id >= MAX77802_LDO1 && id <= MAX77802_LDO35) + return MAX77802_OPMODE_SHIFT_LDO; + else if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 && + id <= MAX77802_BUCK10)) + return 0; + else if (id >= MAX77802_BUCK2 && id <= MAX77802_BUCK4) + return MAX77802_OPMODE_BUCK234_SHIFT; + else + return -EINVAL; +} + +/* + * Some BUCKS supports Normal[ON/OFF] mode during suspend + * + * BUCK 1, 6, 2-4, 5, 7-10 (all) + * + * The other mode (0x02) will make pwrreq switch between normal + * and low power. + */ +static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int val = MAX77802_OPMODE_STANDBY; + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int shift = max77802_get_opmode_shift(id); + + max77802->opmode[id] = val; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); +} + +/* + * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state + * + * LDOs 3-7, 9-14, 18-26, 28, 29, 32-34, 1, 2, 8, 15, 17, 27, 30, 35 (all) + * + * LDOs 1, 20, 21, and 3, mode 1 is not supported + */ +static int max77802_ldo_set_suspend_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + unsigned int val; + int shift = max77802_get_opmode_shift(id); + + switch (mode) { + case REGULATOR_MODE_IDLE: /* ON in LP Mode */ + val = MAX77802_OPMODE_LP; + break; + case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */ + val = MAX77802_OPMODE_NORMAL; + break; + case REGULATOR_MODE_STANDBY: /* switch off */ + if (id != MAX77802_LDO1 && id != MAX77802_LDO20 && + id != MAX77802_LDO21 && id != MAX77802_LDO3) { + val = MAX77802_OPMODE_STANDBY; + break; + } + /* no break */ + default: + pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n", + rdev->desc->name, mode); + return -EINVAL; + } + + max77802->opmode[rdev_get_id(rdev)] = val; + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, val << shift); +} + +static int max77802_enable(struct regulator_dev *rdev) +{ + struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); + int shift = max77802_get_opmode_shift(id); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + max77802->opmode[id] << shift); +} + +static int max77802_find_ramp_value(struct regulator_dev *rdev, + const unsigned int limits[], int size, + unsigned int ramp_delay) +{ + int i; + + for (i = 0; i < size; i++) { + if (ramp_delay <= limits[i]) + return i; + } + + /* Use maximum value for no ramp control */ + pr_warn("%s: ramp_delay: %d not supported, setting 100000\n", + rdev->desc->name, ramp_delay); + return size - 1; +} + +/* Used for BUCKs 2-4 */ +static int max77802_set_ramp_delay_2bit(struct regulator_dev *rdev, + int ramp_delay) +{ + int id = rdev_get_id(rdev); + unsigned int ramp_value; + + if (id > MAX77802_BUCK4) { + pr_warn("%s: regulator_suspend_mode: ramp delay not supported\n", + rdev->desc->name); + return -EINVAL; + } + ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_2bit, + ARRAY_SIZE(ramp_table_77802_2bit), ramp_delay); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX77802_RAMP_RATE_MASK_2BIT, + ramp_value << MAX77802_RAMP_RATE_SHIFT_2BIT); +} + +/* For BUCK1, 6 */ +static int max77802_set_ramp_delay_4bit(struct regulator_dev *rdev, + int ramp_delay) +{ + unsigned int ramp_value; + + ramp_value = max77802_find_ramp_value(rdev, ramp_table_77802_4bit, + ARRAY_SIZE(ramp_table_77802_4bit), ramp_delay); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + MAX77802_RAMP_RATE_MASK_4BIT, + ramp_value << MAX77802_RAMP_RATE_SHIFT_4BIT); +} + +/* + * LDOs 3-7, 9-14, 18-26, 28, 29, 32-34, 1, 2, 8, 15, 17, 27, 30, 35 (all) + */ +static struct regulator_ops max77802_ldo_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_suspend_mode = max77802_ldo_set_suspend_mode, +}; + +/* BUCKS 1, 6 */ +static struct regulator_ops max77802_buck_16_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = max77802_set_ramp_delay_4bit, + .set_suspend_disable = max77802_buck_set_suspend_disable, +}; + +/* BUCKs 2-4, 5, 7-10 */ +static struct regulator_ops max77802_buck_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = max77802_enable, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = max77802_set_ramp_delay_2bit, + .set_suspend_disable = max77802_buck_set_suspend_disable, +}; + +/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */ +#define regulator_77802_desc_p_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX77802_LDO##num, \ + .ops = &max77802_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ +} + +/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */ +#define regulator_77802_desc_n_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX77802_LDO##num, \ + .ops = &max77802_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 25000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \ +} + +/* BUCKs 1, 6 */ +#define regulator_77802_desc_16_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .ops = &max77802_buck_16_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 612500, \ + .uV_step = 6250, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 8, \ + .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ + .vsel_mask = MAX77802_DVS_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +/* BUCKS 2-4 */ +#define regulator_77802_desc_234_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 600000, \ + .uV_step = 6250, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 0x91, \ + .vsel_reg = MAX77802_REG_BUCK ## num ## DVS1, \ + .vsel_mask = MAX77802_DVS_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \ + .enable_mask = MAX77802_OPMODE_MASK << \ + MAX77802_OPMODE_BUCK234_SHIFT, \ +} + +/* BUCK 5 */ +#define regulator_77802_desc_buck5(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_BUCK5OUT, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK5CTRL, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +/* BUCKs 7-10 */ +#define regulator_77802_desc_buck7_10(num) { \ + .name = "BUCK"#num, \ + .id = MAX77802_BUCK##num, \ + .ops = &max77802_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .ramp_delay = MAX77802_RAMP_DELAY, \ + .n_voltages = 1 << 6, \ + .vsel_reg = MAX77802_REG_BUCK7OUT + (num - 7) * 3, \ + .vsel_mask = MAX77802_VSEL_MASK, \ + .enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \ + .enable_mask = MAX77802_OPMODE_MASK, \ +} + +static struct regulator_desc regulators[] = { + regulator_77802_desc_n_ldo(1), + regulator_77802_desc_n_ldo(2), + regulator_77802_desc_p_ldo(3), + regulator_77802_desc_p_ldo(4), + regulator_77802_desc_p_ldo(5), + regulator_77802_desc_p_ldo(6), + regulator_77802_desc_p_ldo(7), + regulator_77802_desc_n_ldo(8), + regulator_77802_desc_p_ldo(9), + regulator_77802_desc_p_ldo(10), + regulator_77802_desc_p_ldo(11), + regulator_77802_desc_p_ldo(12), + regulator_77802_desc_p_ldo(13), + regulator_77802_desc_p_ldo(14), + regulator_77802_desc_n_ldo(15), + regulator_77802_desc_n_ldo(17), + regulator_77802_desc_p_ldo(18), + regulator_77802_desc_p_ldo(19), + regulator_77802_desc_p_ldo(20), + regulator_77802_desc_p_ldo(21), + regulator_77802_desc_p_ldo(23), + regulator_77802_desc_p_ldo(24), + regulator_77802_desc_p_ldo(25), + regulator_77802_desc_p_ldo(26), + regulator_77802_desc_n_ldo(27), + regulator_77802_desc_p_ldo(28), + regulator_77802_desc_p_ldo(29), + regulator_77802_desc_n_ldo(30), + regulator_77802_desc_p_ldo(32), + regulator_77802_desc_p_ldo(33), + regulator_77802_desc_p_ldo(34), + regulator_77802_desc_n_ldo(35), + regulator_77802_desc_16_buck(1), + regulator_77802_desc_234_buck(2), + regulator_77802_desc_234_buck(3), + regulator_77802_desc_234_buck(4), + regulator_77802_desc_buck5(5), + regulator_77802_desc_16_buck(6), + regulator_77802_desc_buck7_10(7), + regulator_77802_desc_buck7_10(8), + regulator_77802_desc_buck7_10(9), + regulator_77802_desc_buck7_10(10), +}; + +#ifdef CONFIG_OF +static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, + struct max77802_platform_data *pdata) +{ + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct device_node *pmic_np, *regulators_np; + struct max77802_regulator_data *rdata; + struct of_regulator_match rmatch; + unsigned int i; + + pmic_np = iodev->dev->of_node; + regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators"); + if (!regulators_np) { + dev_err(&pdev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + pdata->num_regulators = ARRAY_SIZE(regulators); + rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + of_node_put(regulators_np); + return -ENOMEM; + } + + for (i = 0; i < pdata->num_regulators; i++) { + rmatch.name = regulators[i].name; + rmatch.init_data = NULL; + rmatch.of_node = NULL; + if (of_regulator_match(&pdev->dev, regulators_np, &rmatch, + 1) != 1) { + dev_warn(&pdev->dev, + "No matching regulator for '%s'\n", rmatch.name); + continue; + } + rdata[i].initdata = rmatch.init_data; + rdata[i].of_node = rmatch.of_node; + rdata[i].id = regulators[i].id; + } + + pdata->regulators = rdata; + of_node_put(regulators_np); + + return 0; +} +#else +static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, + struct max77802_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + +/** + * max77802_setup_gpios - init DVS-related GPIOs + * + * This function claims / initalizations GPIOs related to DVS if they are + * defined. This may have the effect of switching voltages if the + * pdata->buck_default_idx does not match the boot time state of pins. + */ +static int max77802_setup_gpios(struct device *dev, + struct max77802_platform_data *pdata) +{ + int buck_default_idx = pdata->buck_default_idx; + int ret; + int i; + + /* Set all SELB high to avoid glitching while DVS is changing */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) { + int gpio = pdata->buck_gpio_selb[i]; + + /* OK if some GPIOs aren't defined */ + if (!gpio_is_valid(gpio)) + continue; + + /* If a GPIO is valid, we'd better be able to claim it */ + ret = devm_gpio_request_one(dev, gpio, GPIOF_OUT_INIT_HIGH, + "max77802 selb"); + if (ret) { + dev_err(dev, "can't claim gpio[%d]: %d\n", i, ret); + return ret; + } + } + + /* Set our initial setting */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) { + int gpio = pdata->buck_gpio_dvs[i]; + + /* OK if some GPIOs aren't defined */ + if (!gpio_is_valid(gpio)) + continue; + + /* If a GPIO is valid, we'd better be able to claim it */ + ret = devm_gpio_request(dev, gpio, "max77802 dvs"); + if (ret) { + dev_err(dev, "can't claim gpio[%d]: %d\n", i, ret); + return ret; + } + gpio_direction_output(gpio, (buck_default_idx >> i) & 1); + } + + /* Now set SELB low to take effect */ + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_selb); i++) { + int gpio = pdata->buck_gpio_selb[i]; + + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, 0); + } + + return 0; +} + +/** + * max77802_read_gpios - read the current state of the dvs GPIOs + * + * We call this function at bootup to detect what slot the firmware was + * using for the DVS GPIOs. That way we can properly preserve the firmware's + * voltage settings + */ +static int max77802_read_gpios(struct max77802_platform_data *pdata) +{ + int buck_default_idx = pdata->buck_default_idx; + int result = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(pdata->buck_gpio_dvs); i++) { + int gpio = pdata->buck_gpio_dvs[i]; + + /* OK if some GPIOs aren't defined; we'll use default */ + if (!gpio_is_valid(gpio)) { + result |= buck_default_idx & (1 << i); + continue; + } + + if (gpio_get_value_cansleep(gpio)) + result |= 1 << i; + } + + return result; +} + +static inline bool max77802_is_dvs_buck(int id) +{ + /* on 77802 bucks 1-4, 6 are */ + return ((id >= MAX77802_BUCK1 && id <= MAX77802_BUCK4) || + (id == MAX77802_BUCK6)); +} + +static void max77802_copy_reg(struct device *dev, struct regmap *regmap, + int from_reg, int to_reg) +{ + int val; + int ret; + + if (from_reg == to_reg) + return; + + ret = regmap_read(regmap, from_reg, &val); + if (!ret) + ret = regmap_write(regmap, to_reg, val); + + if (ret) + dev_warn(dev, "Copy err %d => %d (%d)\n", + from_reg, to_reg, ret); +} + +static int max77802_pmic_probe(struct platform_device *pdev) +{ + struct max77802_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77802_platform_data *pdata = dev_get_platdata(iodev->dev); + struct max77802_regulator_prv *max77802; + int i, ret = 0; + struct regulator_config config = { }; + unsigned int reg; + int buck_default_idx; + int buck_old_idx; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + /* This is allocated by the MFD driver */ + if (!pdata) { + dev_err(&pdev->dev, "no platform data found for regulator\n"); + return -ENODEV; + } + + max77802 = devm_kzalloc(&pdev->dev, + sizeof(struct max77802_regulator_prv), + GFP_KERNEL); + if (!max77802) + return -ENOMEM; + + if (iodev->dev->of_node) { + ret = max77802_pmic_dt_parse_pdata(pdev, pdata); + if (ret) + return ret; + } + + if (pdata->num_regulators != MAX77802_MAX_REGULATORS) { + dev_err(&pdev->dev, + "Invalid initial data for regulator's initialiation: " \ + "expected %d, pdata/dt provided %d\n", + MAX77802_MAX_REGULATORS, + pdata->num_regulators); + return -EINVAL; + } + + config.dev = &pdev->dev; + config.regmap = iodev->regmap; + config.driver_data = max77802; + platform_set_drvdata(pdev, max77802); + + buck_default_idx = pdata->buck_default_idx; + buck_old_idx = max77802_read_gpios(pdata); + + for (i = 0; i < MAX77802_MAX_REGULATORS; i++) { + struct regulator_dev *rdev; + int id = pdata->regulators[i].id; + + config.init_data = pdata->regulators[i].initdata; + config.of_node = pdata->regulators[i].of_node; + + max77802->opmode[id] = MAX77802_OPMODE_NORMAL; + + if (max77802_is_dvs_buck(id)) { + /* Try to copy over data so we keep firmware settings */ + reg = regulators[i].vsel_reg; + max77802_copy_reg(&pdev->dev, iodev->regmap, + reg + buck_old_idx, + reg + buck_default_idx); + regulators[i].vsel_reg += buck_default_idx; + } + + rdev = devm_regulator_register(&pdev->dev, + ®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "regulator init failed for %d\n", i); + return PTR_ERR(rdev); + } + } + + ret = max77802_setup_gpios(&pdev->dev, pdata); + if (ret) + return ret; + + return 0; +} + +static const struct platform_device_id max77802_pmic_id[] = { + {"max77802-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77802_pmic_id); + +static struct platform_driver max77802_pmic_driver = { + .driver = { + .name = "max77802-pmic", + .owner = THIS_MODULE, + }, + .probe = max77802_pmic_probe, + .id_table = max77802_pmic_id, +}; + +static int __init max77802_pmic_init(void) +{ + return platform_driver_register(&max77802_pmic_driver); +} +subsys_initcall(max77802_pmic_init); + +static void __exit max77802_pmic_cleanup(void) +{ + platform_driver_unregister(&max77802_pmic_driver); +} +module_exit(max77802_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 77802 Regulator Driver"); +MODULE_AUTHOR("Simon Glass "); +MODULE_LICENSE("GPL");