new file mode 100644
@@ -0,0 +1,16 @@
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
+
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_PRNG) += sunxi-ss-rng.o
+
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_DES) += sunxi-ss-des.o
+sunxi-ss-des-y += sunxi-ss-cipher-des.o sunxi-ss-cipher.o
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_3DES) += sunxi-ss-3des.o
+sunxi-ss-3des-y += sunxi-ss-cipher-3des.o sunxi-ss-cipher.o
+
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_AES) += sunxi-ss-aes.o
+sunxi-ss-aes-y += sunxi-ss-cipher-aes.o sunxi-ss-cipher.o
+
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_MD5) += sunxi-ss-md5.o
+sunxi-ss-md5-y += sunxi-ss-hash.o sunxi-ss-hash-md5.o
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS_SHA1) += sunxi-ss-sha1.o
+sunxi-ss-sha1-y += sunxi-ss-hash.o sunxi-ss-hash-sha1.o
new file mode 100644
@@ -0,0 +1,118 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-cipher.h"
+
+/* check and set the 3DES key, prepare the mode to be used */
+static int sunxi_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+ if (keylen != 3 * DES_KEY_SIZE) {
+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
+
+static int sunxi_des3_cbc_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_info(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_ENCRYPTION;
+ op->mode |= SS_OP_3DES;
+ op->mode |= SS_CBC;
+
+ return sunxi_des_poll(areq);
+}
+
+static int sunxi_des3_cbc_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_info(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_DECRYPTION;
+ op->mode |= SS_OP_3DES;
+ op->mode |= SS_CBC;
+
+ return sunxi_des_poll(areq);
+}
+
+static struct crypto_alg sunxi_des3_alg = {
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES3_EDE_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_cipher_init,
+ .cra_exit = sunxi_cipher_exit,
+ .cra_alignmask = 3,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES3_EDE_KEY_SIZE,
+ .max_keysize = DES3_EDE_KEY_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .setkey = sunxi_des3_setkey,
+ .encrypt = sunxi_des3_cbc_encrypt,
+ .decrypt = sunxi_des3_cbc_decrypt,
+ }
+};
+
+static int sunxi_ss_3des_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get Security System structure\n");
+ return -ENODEV;
+ }
+ err = crypto_register_alg(&sunxi_des3_alg);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error for DES3\n");
+ else
+ dev_dbg(ss->dev, "Registred DES3\n");
+ return err;
+}
+
+static void __exit sunxi_ss_3des_exit(void)
+{
+ crypto_unregister_alg(&sunxi_des3_alg);
+}
+
+module_init(sunxi_ss_3des_init);
+module_exit(sunxi_ss_3des_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator DES3 module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_ALIAS("3des");
new file mode 100644
@@ -0,0 +1,130 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-cipher.h"
+
+static int sunxi_aes_cbc_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_err(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_ENCRYPTION;
+ op->mode |= SS_OP_AES;
+ op->mode |= SS_CBC;
+
+ return sunxi_aes_poll(areq);
+}
+
+static int sunxi_aes_cbc_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_err(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_DECRYPTION;
+ op->mode |= SS_OP_AES;
+ op->mode |= SS_CBC;
+
+ return sunxi_aes_poll(areq);
+}
+
+/* check and set the AES key, prepare the mode to be used */
+static int sunxi_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+ switch (keylen) {
+ case 128 / 8:
+ op->mode = SS_AES_128BITS;
+ break;
+ case 192 / 8:
+ op->mode = SS_AES_192BITS;
+ break;
+ case 256 / 8:
+ op->mode = SS_AES_256BITS;
+ break;
+ default:
+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
+
+static struct crypto_alg sunxi_aes_alg = {
+ .cra_name = "cbc(aes)",
+ .cra_driver_name = "cbc-aes-sunxi-ss",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = AES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_alignmask = 3,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_cipher_init,
+ .cra_exit = sunxi_cipher_exit,
+ .cra_u = {
+ .ablkcipher = {
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .setkey = sunxi_aes_setkey,
+ .encrypt = sunxi_aes_cbc_encrypt,
+ .decrypt = sunxi_aes_cbc_decrypt,
+ }
+ }
+};
+
+int sunxi_ss_aes_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get Security System structure\n");
+ return -ENODEV;
+ }
+ err = crypto_register_alg(&sunxi_aes_alg);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error for AES\n");
+ else
+ dev_dbg(ss->dev, "Registred AES\n");
+ return err;
+}
+
+static void __exit sunxi_ss_aes_exit(void)
+{
+ crypto_unregister_alg(&sunxi_aes_alg);
+}
+
+module_init(sunxi_ss_aes_init);
+module_exit(sunxi_ss_aes_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator AES module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_ALIAS("aes");
new file mode 100644
@@ -0,0 +1,118 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-cipher.h"
+
+/* check and set the DES key, prepare the mode to be used */
+static int sunxi_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen)
+{
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+ if (keylen != DES_KEY_SIZE) {
+ dev_err(ss->dev, "Invalid keylen %u\n", keylen);
+ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
+ return -EINVAL;
+ }
+ op->keylen = keylen;
+ memcpy(op->key, key, keylen);
+ return 0;
+}
+
+static int sunxi_des_cbc_encrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_info(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_ENCRYPTION;
+ op->mode |= SS_OP_DES;
+ op->mode |= SS_CBC;
+
+ return sunxi_des_poll(areq);
+}
+
+static int sunxi_des_cbc_decrypt(struct ablkcipher_request *areq)
+{
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+
+ if (areq->info == NULL) {
+ dev_info(ss->dev, "Empty IV\n");
+ return -EINVAL;
+ }
+
+ op->mode |= SS_DECRYPTION;
+ op->mode |= SS_OP_DES;
+ op->mode |= SS_CBC;
+
+ return sunxi_des_poll(areq);
+}
+
+static struct crypto_alg sunxi_des_alg = {
+ .cra_name = "cbc(des)",
+ .cra_driver_name = "cbc-des-sunxi-ss",
+ .cra_priority = 300,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_init = sunxi_cipher_init,
+ .cra_exit = sunxi_cipher_exit,
+ .cra_alignmask = 3,
+ .cra_u.ablkcipher = {
+ .min_keysize = DES_KEY_SIZE,
+ .max_keysize = DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = sunxi_des_setkey,
+ .encrypt = sunxi_des_cbc_encrypt,
+ .decrypt = sunxi_des_cbc_decrypt,
+ }
+};
+
+static int sunxi_ss_des_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get Security System structure\n");
+ return -ENODEV;
+ }
+ err = crypto_register_alg(&sunxi_des_alg);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error for DES\n");
+ else
+ dev_dbg(ss->dev, "Registred DES\n");
+ return err;
+}
+
+static void __exit sunxi_ss_des_exit(void)
+{
+ crypto_unregister_alg(&sunxi_des_alg);
+}
+
+module_init(sunxi_ss_des_init);
+module_exit(sunxi_ss_des_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator DES module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_ALIAS("des");
new file mode 100644
@@ -0,0 +1,362 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-cipher.h"
+
+int sunxi_cipher_init(struct crypto_tfm *tfm)
+{
+ struct sunxi_req_ctx *op = crypto_tfm_ctx(tfm);
+ memset(op, 0, sizeof(struct sunxi_req_ctx));
+ return 0;
+}
+
+void sunxi_cipher_exit(struct crypto_tfm *tfm)
+{
+}
+
+int sunxi_aes_poll(struct ablkcipher_request *areq)
+{
+ u32 tmp;
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
+ /* when activating SS, the default FIFO space is 32 */
+ u32 rx_cnt = 32;
+ u32 tx_cnt = 0;
+ u32 v;
+ int i;
+ struct scatterlist *in_sg;
+ struct scatterlist *out_sg;
+ void *src_addr;
+ void *dst_addr;
+ unsigned int ileft = areq->nbytes;
+ unsigned int oleft = areq->nbytes;
+ unsigned int sgileft = areq->src->length;
+ unsigned int sgoleft = areq->dst->length;
+ unsigned int todo;
+ u32 *src32;
+ u32 *dst32;
+
+ tmp = op->mode;
+ tmp |= SS_ENABLED;
+
+ in_sg = areq->src;
+ out_sg = areq->dst;
+ if (areq->src == NULL || areq->dst == NULL) {
+ dev_err(ss->dev, "ERROR: Some SGs are NULL %u\n", areq->nbytes);
+ return -1;
+ }
+ mutex_lock(&ss->lock);
+ if (areq->info != NULL) {
+ for (i = 0; i < op->keylen; i += 4) {
+ v = *(u32 *)(op->key + i);
+ writel(v, ss->base + SS_KEY0 + i);
+ }
+ for (i = 0; i < 4 && i < ivsize / 4; i++) {
+ v = *(u32 *)(areq->info + i * 4);
+ writel(v, ss->base + SS_IV0 + i * 4);
+ }
+ }
+ writel(tmp, ss->base + SS_CTL);
+
+ /* If we have only one SG, we can use kmap_atomic */
+ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) {
+ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "kmap_atomic error for src SG\n");
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ return -1;
+ }
+ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset;
+ if (dst_addr == NULL) {
+ dev_err(ss->dev, "kmap_atomic error for dst SG\n");
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ kunmap_atomic(src_addr);
+ return -1;
+ }
+ src32 = (u32 *)src_addr;
+ dst32 = (u32 *)dst_addr;
+ ileft = areq->nbytes / 4;
+ oleft = areq->nbytes / 4;
+ do {
+ if (ileft > 0 && rx_cnt > 0) {
+ todo = min(rx_cnt, ileft);
+ ileft -= todo;
+ do {
+ writel_relaxed(*src32++,
+ ss->base +
+ SS_RXFIFO);
+ todo--;
+ } while (todo > 0);
+ }
+ if (tx_cnt > 0) {
+ todo = min(tx_cnt, oleft);
+ oleft -= todo;
+ do {
+ *dst32++ = readl_relaxed(ss->base +
+ SS_TXFIFO);
+ todo--;
+ } while (todo > 0);
+ }
+ tmp = readl_relaxed(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(tmp);
+ tx_cnt = SS_TXFIFO_SPACES(tmp);
+ } while (oleft > 0);
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ kunmap_atomic(src_addr);
+ kunmap_atomic(dst_addr);
+ return 0;
+ }
+
+ /* If we have more than one SG, we cannot use kmap_atomic since
+ * we hold the mapping too long*/
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "KMAP error for src SG\n");
+ return -1;
+ }
+ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset;
+ if (dst_addr == NULL) {
+ kunmap(sg_page(in_sg));
+ dev_err(ss->dev, "KMAP error for dst SG\n");
+ return -1;
+ }
+ src32 = (u32 *)src_addr;
+ dst32 = (u32 *)dst_addr;
+ ileft = areq->nbytes / 4;
+ oleft = areq->nbytes / 4;
+ sgileft = in_sg->length / 4;
+ sgoleft = out_sg->length / 4;
+ do {
+ tmp = readl_relaxed(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(tmp);
+ tx_cnt = SS_TXFIFO_SPACES(tmp);
+ todo = min3(rx_cnt, ileft, sgileft);
+ if (todo > 0) {
+ ileft -= todo;
+ sgileft -= todo;
+ }
+ while (todo > 0) {
+ writel_relaxed(*src32++, ss->base + SS_RXFIFO);
+ todo--;
+ }
+ if (in_sg != NULL && sgileft == 0 && ileft > 0) {
+ kunmap(sg_page(in_sg));
+ in_sg = sg_next(in_sg);
+ if (in_sg != NULL && in_sg->length == 0)
+ in_sg = sg_next(in_sg);
+ if (in_sg != NULL && in_sg->length == 0)
+ in_sg = sg_next(in_sg);
+ if (in_sg != NULL && ileft > 0) {
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ if (src_addr == NULL) {
+ dev_err(ss->dev, "KMAP error for src SG\n");
+ return -1;
+ }
+ src32 = src_addr;
+ sgileft = in_sg->length / 4;
+ }
+ }
+ /* do not test oleft since when oleft == 0 we have finished */
+ todo = min3(tx_cnt, oleft, sgoleft);
+ if (todo > 0) {
+ oleft -= todo;
+ sgoleft -= todo;
+ }
+ while (todo > 0) {
+ *dst32++ = readl_relaxed(ss->base + SS_TXFIFO);
+ todo--;
+ }
+ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) {
+ kunmap(sg_page(out_sg));
+ out_sg = sg_next(out_sg);
+ if (out_sg != NULL && out_sg->length == 0)
+ out_sg = sg_next(out_sg);
+ if (out_sg != NULL && oleft > 0) {
+ dst_addr = kmap(sg_page(out_sg)) +
+ out_sg->offset;
+ if (dst_addr == NULL) {
+ dev_err(ss->dev, "KMAP error\n");
+ return -1;
+ }
+ dst32 = dst_addr;
+ sgoleft = out_sg->length / 4;
+ }
+ }
+ } while (oleft > 0);
+
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ return 0;
+}
+
+/* Pure CPU way of doing DES/3DES with SS
+ * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer
+ * for "linearize" them.
+ * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out
+ * TODO: change this system
+ * SGsrc -> buf_in -> SS -> buf_out -> SGdst */
+int sunxi_des_poll(struct ablkcipher_request *areq)
+{
+ u32 tmp, value;
+ size_t nb_in_sg_tx, nb_in_sg_rx;
+ size_t ir, it;
+ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ablkcipher_ctx(tfm);
+ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm);
+ u32 tx_cnt = 0;
+ u32 rx_cnt = 0;
+ u32 v;
+ int i;
+ int no_chunk = 1;
+
+ /* if we have only SGs with size multiple of 4,
+ * we can use the SS AES function */
+ struct scatterlist *in_sg;
+ struct scatterlist *out_sg;
+ in_sg = areq->src;
+ out_sg = areq->dst;
+
+ while (in_sg != NULL && no_chunk == 1) {
+ if ((in_sg->length % 4) != 0)
+ no_chunk = 0;
+ in_sg = sg_next(in_sg);
+ }
+ while (out_sg != NULL && no_chunk == 1) {
+ if ((out_sg->length % 4) != 0)
+ no_chunk = 0;
+ out_sg = sg_next(out_sg);
+ }
+
+ if (no_chunk == 1)
+ return sunxi_aes_poll(areq);
+ in_sg = areq->src;
+ out_sg = areq->dst;
+
+ tmp = op->mode;
+ tmp |= SS_ENABLED;
+
+ nb_in_sg_rx = sg_nents(in_sg);
+ nb_in_sg_tx = sg_nents(out_sg);
+
+ mutex_lock(&ss->bufin_lock);
+ if (ss->buf_in == NULL) {
+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
+ ss->buf_in_size = areq->nbytes;
+ } else {
+ if (areq->nbytes > ss->buf_in_size) {
+ kfree(ss->buf_in);
+ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL);
+ ss->buf_in_size = areq->nbytes;
+ }
+ }
+ if (ss->buf_in == NULL) {
+ ss->buf_in_size = 0;
+ mutex_unlock(&ss->bufin_lock);
+ dev_err(ss->dev, "Unable to allocate pages.\n");
+ return -ENOMEM;
+ }
+ if (ss->buf_out == NULL) {
+ mutex_lock(&ss->bufout_lock);
+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
+ if (ss->buf_out == NULL) {
+ ss->buf_out_size = 0;
+ mutex_unlock(&ss->bufout_lock);
+ dev_err(ss->dev, "Unable to allocate pages.\n");
+ return -ENOMEM;
+ }
+ ss->buf_out_size = areq->nbytes;
+ mutex_unlock(&ss->bufout_lock);
+ } else {
+ if (areq->nbytes > ss->buf_out_size) {
+ mutex_lock(&ss->bufout_lock);
+ kfree(ss->buf_out);
+ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL);
+ if (ss->buf_out == NULL) {
+ ss->buf_out_size = 0;
+ mutex_unlock(&ss->bufout_lock);
+ dev_err(ss->dev, "Unable to allocate pages.\n");
+ return -ENOMEM;
+ }
+ ss->buf_out_size = areq->nbytes;
+ mutex_unlock(&ss->bufout_lock);
+ }
+ }
+
+ sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes);
+
+ ir = 0;
+ it = 0;
+ mutex_lock(&ss->lock);
+ if (areq->info != NULL) {
+ for (i = 0; i < op->keylen; i += 4) {
+ v = *(u32 *)(op->key + i);
+ writel(v, ss->base + SS_KEY0 + i);
+ }
+ for (i = 0; i < 4 && i < ivsize / 4; i++) {
+ v = *(u32 *)(areq->info + i * 4);
+ writel(v, ss->base + SS_IV0 + i * 4);
+ }
+ }
+ writel(tmp, ss->base + SS_CTL);
+
+ do {
+ if (rx_cnt == 0 || tx_cnt == 0) {
+ tmp = readl(ss->base + SS_FCSR);
+ rx_cnt = SS_RXFIFO_SPACES(tmp);
+ tx_cnt = SS_TXFIFO_SPACES(tmp);
+ }
+ if (rx_cnt > 0 && ir < areq->nbytes) {
+ do {
+ value = *(u32 *)(ss->buf_in + ir);
+ writel(value, ss->base + SS_RXFIFO);
+ ir += 4;
+ rx_cnt--;
+ } while (rx_cnt > 0 && ir < areq->nbytes);
+ }
+ if (tx_cnt > 0 && it < areq->nbytes) {
+ do {
+ if (ir <= it)
+ dev_warn(ss->dev, "ANORMAL %u %u\n",
+ ir, it);
+ value = readl(ss->base + SS_TXFIFO);
+ *(u32 *)(ss->buf_out + it) = value;
+ it += 4;
+ tx_cnt--;
+ } while (tx_cnt > 0 && it < areq->nbytes);
+ }
+ if (ir == areq->nbytes) {
+ mutex_unlock(&ss->bufin_lock);
+ ir++;
+ }
+ } while (it < areq->nbytes);
+
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+
+ /* a simple optimization, since we dont need the hardware for this copy
+ * we release the lock and do the copy. With that we gain 5/10% perf */
+ mutex_lock(&ss->bufout_lock);
+ sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes);
+
+ mutex_unlock(&ss->bufout_lock);
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,8 @@
+#include "sunxi-ss.h"
+
+extern struct sunxi_ss_ctx *ss;
+
+int sunxi_aes_poll(struct ablkcipher_request *areq);
+int sunxi_des_poll(struct ablkcipher_request *areq);
+int sunxi_cipher_init(struct crypto_tfm *tfm);
+void sunxi_cipher_exit(struct crypto_tfm *tfm);
new file mode 100644
@@ -0,0 +1,69 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-hash.h"
+
+static struct ahash_alg sunxi_md5_alg = {
+ .init = sunxi_hash_init,
+ .update = sunxi_hash_update,
+ .final = sunxi_hash_final,
+ .finup = sunxi_hash_finup,
+ .digest = sunxi_hash_digest,
+ .halg = {
+ .digestsize = MD5_DIGEST_SIZE,
+ .base = {
+ .cra_name = "md5",
+ .cra_driver_name = "md5-sunxi-ss",
+ .cra_priority = 300,
+ .cra_alignmask = 3,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = MD5_HMAC_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ahash_type
+ }
+ }
+};
+
+static int sunxi_ss_md5_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get Security System structure\n");
+ return -ENODEV;
+ }
+ err = crypto_register_ahash(&sunxi_md5_alg);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error for MD5\n");
+ else
+ dev_dbg(ss->dev, "Registred MD5\n");
+ return err;
+}
+
+static void __exit sunxi_ss_md5_exit(void)
+{
+ crypto_unregister_ahash(&sunxi_md5_alg);
+}
+
+module_init(sunxi_ss_md5_init);
+module_exit(sunxi_ss_md5_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator MD5 module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_ALIAS("md5");
new file mode 100644
@@ -0,0 +1,69 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss-hash.h"
+
+static struct ahash_alg sunxi_sha1_alg = {
+ .init = sunxi_hash_init,
+ .update = sunxi_hash_update,
+ .final = sunxi_hash_final,
+ .finup = sunxi_hash_finup,
+ .digest = sunxi_hash_digest,
+ .halg = {
+ .digestsize = SHA1_DIGEST_SIZE,
+ .base = {
+ .cra_name = "sha1",
+ .cra_driver_name = "sha1-sunxi-ss",
+ .cra_priority = 300,
+ .cra_alignmask = 3,
+ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC,
+ .cra_blocksize = SHA1_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct sunxi_req_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_ahash_type
+ }
+ }
+};
+
+static int sunxi_ss_sha1_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get Security System structure\n");
+ return -ENODEV;
+ }
+ err = crypto_register_ahash(&sunxi_sha1_alg);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error for SHA1\n");
+ else
+ dev_dbg(ss->dev, "Registred SHA1\n");
+ return err;
+}
+
+static void __exit sunxi_ss_sha1_exit(void)
+{
+ crypto_unregister_ahash(&sunxi_sha1_alg);
+}
+
+module_init(sunxi_ss_sha1_init);
+module_exit(sunxi_ss_sha1_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator SHA1 module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
+MODULE_ALIAS("sha1");
new file mode 100644
@@ -0,0 +1,228 @@
+#include "sunxi-ss-hash.h"
+
+/* sunxi_hash_init: initialize request context
+ * Activate the SS, and configure it for MD5 or SHA1
+ */
+int sunxi_hash_init(struct ahash_request *areq)
+{
+ const char *hash_type;
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
+ u32 tmp = SS_ENABLED;
+
+ mutex_lock(&ss->lock);
+
+ hash_type = crypto_tfm_alg_name(areq->base.tfm);
+
+ op->byte_count = 0;
+ op->nbwait = 0;
+ op->waitbuf = 0;
+
+ /* Enable and configure SS for MD5 or SHA1 */
+ if (strcmp(hash_type, "sha1") == 0) {
+ tmp |= SS_OP_SHA1;
+ op->mode = SS_OP_SHA1;
+ } else {
+ tmp |= SS_OP_MD5;
+ op->mode = SS_OP_MD5;
+ }
+
+ writel(tmp, ss->base + SS_CTL);
+ return 0;
+}
+
+/*
+ * sunxi_hash_update: update hash engine
+ *
+ * Could be used for both SHA1 and MD5
+ * Write data by step of 32bits and put then in the SS.
+ * The remaining data is stored (nbwait bytes) in op->waitbuf
+ * As an optimisation, we do not check RXFIFO_SPACES, since SS handle
+ * the FIFO faster than our writes
+ */
+int sunxi_hash_update(struct ahash_request *areq)
+{
+ u32 v;
+ unsigned int i = 0;/* bytes read, to be compared to areq->nbytes */
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
+ struct scatterlist *in_sg;
+ unsigned int in_i = 0;/* advancement in the current SG */
+ void *src_addr;
+
+ u8 *waitbuf = (u8 *)(&op->waitbuf);
+
+ if (areq->nbytes == 0)
+ return 0;
+
+ in_sg = areq->src;
+ do {
+ src_addr = kmap(sg_page(in_sg)) + in_sg->offset;
+ /* step 1, if some bytes remains from last SG,
+ * try to complete them to 4 and sent its */
+ if (op->nbwait > 0) {
+ while (op->nbwait < 4 && i < areq->nbytes &&
+ in_i < in_sg->length) {
+ waitbuf[op->nbwait] = *(u8 *)(src_addr + in_i);
+ i++;
+ in_i++;
+ op->nbwait++;
+ }
+ if (op->nbwait == 4) {
+ writel(op->waitbuf, ss->base + SS_RXFIFO);
+ op->byte_count += 4;
+ op->nbwait = 0;
+ op->waitbuf = 0;
+ }
+ }
+ /* step 2, main loop, read data 4bytes at a time */
+ while (i < areq->nbytes && areq->nbytes - i >= 4 &&
+ in_i < in_sg->length &&
+ in_sg->length - in_i >= 4) {
+ v = *(u32 *)(src_addr + in_i);
+ writel_relaxed(v, ss->base + SS_RXFIFO);
+ i += 4;
+ op->byte_count += 4;
+ in_i += 4;
+ }
+ /* step 3, if we have less than 4 bytes, copy them in waitbuf
+ * no need to check for op->nbwait < 4 since we cannot have
+ * more than 4 bytes remaining */
+ if (in_i < in_sg->length && in_sg->length - in_i < 4 &&
+ i < areq->nbytes) {
+ do {
+ waitbuf[op->nbwait] = *(u8 *)(src_addr + in_i);
+ op->nbwait++;
+ in_i++;
+ i++;
+ } while (in_i < in_sg->length && i < areq->nbytes);
+ }
+ /* we have finished the current SG, try next one */
+ kunmap(sg_page(in_sg));
+ in_sg = sg_next(in_sg);
+ in_i = 0;
+ } while (in_sg != NULL && i < areq->nbytes);
+ return 0;
+}
+
+/*
+ * sunxi_hash_final: finalize hashing operation
+ *
+ * If we have some remaining bytes, send it.
+ * Then ask the SS for finalizing the hash
+ */
+int sunxi_hash_final(struct ahash_request *areq)
+{
+ u32 v;
+ unsigned int i;
+ int zeros;
+ unsigned int index, padlen;
+ __be64 bits;
+ struct crypto_ahash *tfm = crypto_ahash_reqtfm(areq);
+ struct sunxi_req_ctx *op = crypto_ahash_ctx(tfm);
+
+ if (op->nbwait > 0) {
+ op->waitbuf |= ((1 << 7) << (op->nbwait * 8));
+ writel(op->waitbuf, ss->base + SS_RXFIFO);
+ } else {
+ writel((1 << 7), ss->base + SS_RXFIFO);
+ }
+
+ /* number of space to pad to obtain 64o minus 8(size) minus 4 (final 1)
+ * example len=0
+ * example len=56
+ * */
+
+ /* we have already send 4 more byte of which nbwait data */
+ if (op->mode == SS_OP_MD5) {
+ index = (op->byte_count + 4) & 0x3f;
+ op->byte_count += op->nbwait;
+ if (index > 56)
+ zeros = (120 - index) / 4;
+ else
+ zeros = (56 - index) / 4;
+ } else {
+ op->byte_count += op->nbwait;
+ index = op->byte_count & 0x3f;
+ padlen = (index < 56) ? (56 - index) : ((64+56) - index);
+ zeros = (padlen - 1) / 4;
+ }
+ for (i = 0; i < zeros; i++)
+ writel(0, ss->base + SS_RXFIFO);
+
+ /* write the lenght */
+ if (op->mode == SS_OP_SHA1) {
+ bits = cpu_to_be64(op->byte_count << 3);
+ writel(bits & 0xffffffff, ss->base + SS_RXFIFO);
+ writel((bits >> 32) & 0xffffffff, ss->base + SS_RXFIFO);
+ } else {
+ writel((op->byte_count << 3) & 0xffffffff,
+ ss->base + SS_RXFIFO);
+ writel((op->byte_count >> 29) & 0xffffffff,
+ ss->base + SS_RXFIFO);
+ }
+
+ /* stop the hashing */
+ v = readl(ss->base + SS_CTL);
+ v |= SS_DATA_END;
+ writel(v, ss->base + SS_CTL);
+
+ /* check the end */
+ /* The timeout could happend only in case of bad overcloking */
+#define SS_TIMEOUT 100
+ i = 0;
+ do {
+ v = readl(ss->base + SS_CTL);
+ i++;
+ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0);
+ if (i >= SS_TIMEOUT) {
+ dev_err(ss->dev, "ERROR: hash end timeout %d>%d\n",
+ i, SS_TIMEOUT);
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ return -1;
+ }
+
+ if (op->mode == SS_OP_SHA1) {
+ for (i = 0; i < 5; i++) {
+ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4));
+ memcpy(areq->result + i * 4, &v, 4);
+ }
+ } else {
+ for (i = 0; i < 4; i++) {
+ v = readl(ss->base + SS_MD0 + i * 4);
+ memcpy(areq->result + i * 4, &v, 4);
+ }
+ }
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ return 0;
+}
+
+/* sunxi_hash_finup: finalize hashing operation after an update */
+int sunxi_hash_finup(struct ahash_request *areq)
+{
+ int err;
+
+ err = sunxi_hash_update(areq);
+ if (err != 0)
+ return err;
+
+ return sunxi_hash_final(areq);
+}
+
+/* combo of init/update/final functions */
+int sunxi_hash_digest(struct ahash_request *areq)
+{
+ int err;
+
+ err = sunxi_hash_init(areq);
+ if (err != 0)
+ return err;
+
+ err = sunxi_hash_update(areq);
+ if (err != 0)
+ return err;
+
+ return sunxi_hash_final(areq);
+}
new file mode 100644
@@ -0,0 +1,9 @@
+#include "sunxi-ss.h"
+
+extern struct sunxi_ss_ctx *ss;
+
+int sunxi_hash_init(struct ahash_request *areq);
+int sunxi_hash_update(struct ahash_request *areq);
+int sunxi_hash_final(struct ahash_request *areq);
+int sunxi_hash_finup(struct ahash_request *areq);
+int sunxi_hash_digest(struct ahash_request *areq);
new file mode 100644
@@ -0,0 +1,115 @@
+#include "sunxi-ss.h"
+#include <crypto/internal/rng.h>
+
+#define SS_SEED_LEN (192/8)
+#define SS_DATA_LEN (160/8)
+
+struct prng_context {
+ u32 seed[SS_SEED_LEN/4];
+ unsigned int slen;
+};
+
+extern struct sunxi_ss_ctx *ss;
+
+static int sunxi_ss_rng_get_random(struct crypto_rng *tfm, u8 *rdata,
+ unsigned int dlen)
+{
+ struct prng_context *ctx = crypto_rng_ctx(tfm);
+ int i;
+ u32 mode = 0;
+ u32 v;
+
+ if (rdata == NULL)
+ return -EINVAL;
+
+ mode |= SS_OP_PRNG | SS_PRNG_ONESHOT | SS_ENABLED;
+
+ mutex_lock(&ss->lock);
+ writel(mode, ss->base + SS_CTL);
+
+ for (i = 0; i < ctx->slen && i < SS_SEED_LEN; i += 4) {
+ v = *(u32 *)(ctx->seed + i);
+ writel(v, ss->base + SS_KEY0 + i);
+ }
+
+ writel(mode | SS_PRNG_START, ss->base + SS_CTL);
+ i = 0;
+ do {
+ v = readl(ss->base + SS_CTL);
+ i++;
+ } while (v != mode && i < 10);
+ for (i = 0; i < dlen && i < SS_DATA_LEN; i += 4) {
+ v = readl(ss->base + SS_MD0 + i);
+ *(u32 *)(rdata + i) = v;
+ }
+
+ writel(0, ss->base + SS_CTL);
+ mutex_unlock(&ss->lock);
+ return dlen;
+}
+
+static int sunxi_ss_rng_reset(struct crypto_rng *tfm, u8 *seed,
+ unsigned int slen)
+{
+ struct prng_context *ctx = crypto_rng_ctx(tfm);
+ unsigned int i;
+
+ if (slen == 0) {
+ ctx->slen = 0;
+ return 0;
+ }
+ if (slen > SS_SEED_LEN) {
+ dev_err(ss->dev, "Requested seedlen %u exceed %u\n",
+ slen, SS_SEED_LEN);
+ return -EINVAL;
+ }
+ for (i = 0; i < SS_SEED_LEN && i < slen; i++)
+ ctx->seed[i] = seed[i];
+ ctx->slen = slen;
+ return 0;
+}
+
+static struct crypto_alg sunxi_ss_prng = {
+ .cra_name = "stdrng",
+ .cra_driver_name = "rng-sunxi-ss",
+ .cra_priority = 300,
+ .cra_flags = CRYPTO_ALG_TYPE_RNG,
+ .cra_ctxsize = sizeof(struct prng_context),
+ .cra_module = THIS_MODULE,
+ .cra_type = &crypto_rng_type,
+ .cra_u.rng = {
+ .rng_make_random = sunxi_ss_rng_get_random,
+ .rng_reset = sunxi_ss_rng_reset,
+ .seedsize = SS_SEED_LEN
+ }
+};
+
+
+static int sunxi_ss_rng_init(void)
+{
+ int err = 0;
+ if (ss == NULL) {
+ pr_err("Cannot get SUNXI SS\n");
+ return 0;
+ }
+
+ err = crypto_register_alg(&sunxi_ss_prng);
+ if (err)
+ dev_err(ss->dev, "crypto_register_alg error\n");
+ else
+ dev_info(ss->dev, "Registred PRNG\n");
+ return err;
+}
+
+static void __exit sunxi_ss_rng_exit(void)
+{
+ crypto_unregister_alg(&sunxi_ss_prng);
+}
+
+
+module_init(sunxi_ss_rng_init);
+module_exit(sunxi_ss_rng_exit);
+
+MODULE_DESCRIPTION("Allwinner Security System crypto accelerator RNG module");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
new file mode 100644
@@ -0,0 +1,190 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+#include "sunxi-ss.h"
+
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <crypto/scatterwalk.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+/* General notes:
+ * I cannot use a key/IV cache because each time one of these change ALL stuff
+ * need to be re-writed (rewrite SS_KEYX ans SS_IVX).
+ * And for example, with dm-crypt IV changes on each request.
+ *
+ * After each request the device must be disabled with a write of 0 in SS_CTL
+ *
+ * For performance reason, we use writel_relaxed/read_relaxed for all
+ * operations on RX and TX FIFO and also SS_FCSR.
+ * For all other registers, we use writel/readl.
+ * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644
+ * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640
+ * */
+
+static int ss_is_init;
+struct sunxi_ss_ctx *ss;
+EXPORT_SYMBOL_GPL(ss);
+
+static int sunxi_ss_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ u32 v;
+ int err;
+ unsigned long cr;
+ const unsigned long cr_ahb = 24 * 1000 * 1000;
+ const unsigned long cr_mod = 150 * 1000 * 1000;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ if (ss_is_init == 1) {
+ dev_err(&pdev->dev, "Device already initialized\n");
+ return -ENODEV;
+ }
+
+ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL);
+ if (ss == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ss->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ss->base)) {
+ dev_err(&pdev->dev, "Cannot request MMIO\n");
+ return PTR_ERR(ss->base);
+ }
+
+ ss->ssclk = devm_clk_get(&pdev->dev, "mod");
+ if (IS_ERR(ss->ssclk)) {
+ err = PTR_ERR(ss->ssclk);
+ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err);
+ return err;
+ }
+ dev_dbg(&pdev->dev, "clock ss acquired\n");
+
+ ss->busclk = devm_clk_get(&pdev->dev, "ahb");
+ if (IS_ERR(ss->busclk)) {
+ err = PTR_ERR(ss->busclk);
+ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err);
+ return err;
+ }
+ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n");
+
+ /* Enable the clocks */
+ err = clk_prepare_enable(ss->busclk);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n");
+ return err;
+ }
+ err = clk_prepare_enable(ss->ssclk);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n");
+ clk_disable_unprepare(ss->busclk);
+ return err;
+ }
+
+ /* Check that clock have the correct rates gived in the datasheet */
+ /* Try to set the clock to the maximum allowed */
+ err = clk_set_rate(ss->ssclk, cr_mod);
+ if (err != 0) {
+ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n");
+ clk_disable_unprepare(ss->ssclk);
+ clk_disable_unprepare(ss->busclk);
+ return err;
+ }
+ cr = clk_get_rate(ss->busclk);
+ if (cr >= cr_ahb)
+ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
+ cr, cr / 1000000, cr_ahb);
+ else
+ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n",
+ cr, cr / 1000000, cr_ahb);
+ cr = clk_get_rate(ss->ssclk);
+ if (cr == cr_mod)
+ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n",
+ cr, cr / 1000000, cr_mod);
+ else {
+ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n",
+ cr, cr / 1000000, cr_mod);
+ }
+
+ /* TODO Does this information could be usefull ? */
+ writel(SS_ENABLED, ss->base + SS_CTL);
+ v = readl(ss->base + SS_CTL);
+ v >>= 16;
+ v &= 0x07;
+ dev_info(&pdev->dev, "Die ID %d\n", v);
+ writel(0, ss->base + SS_CTL);
+
+ ss->dev = &pdev->dev;
+
+ mutex_init(&ss->lock);
+ mutex_init(&ss->bufin_lock);
+ mutex_init(&ss->bufout_lock);
+ ss_is_init = 1;
+ return 0;
+}
+
+/* No need to check is some sub module is loaded,
+ * since they need the ss structure symbol */
+static int __exit sunxi_ss_remove(struct platform_device *pdev)
+{
+ if (!pdev->dev.of_node)
+ return 0;
+
+ if (ss->buf_in != NULL)
+ kfree(ss->buf_in);
+ if (ss->buf_out != NULL)
+ kfree(ss->buf_out);
+
+ writel(0, ss->base + SS_CTL);
+ clk_disable_unprepare(ss->busclk);
+ clk_disable_unprepare(ss->ssclk);
+ ss_is_init = 0;
+ return 0;
+}
+
+/*============================================================================*/
+/*============================================================================*/
+static const struct of_device_id a20ss_crypto_of_match_table[] = {
+ { .compatible = "allwinner,sun7i-a20-crypto" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table);
+
+static struct platform_driver sunxi_ss_driver = {
+ .probe = sunxi_ss_probe,
+ .remove = __exit_p(sunxi_ss_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "sunxi-ss",
+ .of_match_table = a20ss_crypto_of_match_table,
+ },
+};
+
+module_platform_driver(sunxi_ss_driver);
+
+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
new file mode 100644
@@ -0,0 +1,161 @@
+/*
+ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC
+ *
+ * Copyright (C) 2013-2014 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * Support AES cipher with 128,192,256 bits keysize.
+ * Support MD5 and SHA1 hash algorithms.
+ * Support DES and 3DES
+ * Support PRNG
+ *
+ * You could find the datasheet at
+ * http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2 of the License
+ */
+
+#include <linux/clk.h>
+#include <linux/crypto.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <crypto/scatterwalk.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <crypto/md5.h>
+#include <crypto/sha.h>
+#include <crypto/hash.h>
+#include <crypto/internal/hash.h>
+#include <crypto/aes.h>
+#include <crypto/des.h>
+
+#define SS_CTL 0x00
+#define SS_KEY0 0x04
+#define SS_KEY1 0x08
+#define SS_KEY2 0x0C
+#define SS_KEY3 0x10
+#define SS_KEY4 0x14
+#define SS_KEY5 0x18
+#define SS_KEY6 0x1C
+#define SS_KEY7 0x20
+
+#define SS_IV0 0x24
+#define SS_IV1 0x28
+#define SS_IV2 0x2C
+#define SS_IV3 0x30
+
+#define SS_CNT0 0x34
+#define SS_CNT1 0x38
+#define SS_CNT2 0x3C
+#define SS_CNT3 0x40
+
+#define SS_FCSR 0x44
+#define SS_ICSR 0x48
+
+#define SS_MD0 0x4C
+#define SS_MD1 0x50
+#define SS_MD2 0x54
+#define SS_MD3 0x58
+#define SS_MD4 0x5C
+
+#define SS_RXFIFO 0x200
+#define SS_TXFIFO 0x204
+
+/* SS_CTL configuration values */
+
+/* PRNG generator mode - bit 15 */
+#define SS_PRNG_ONESHOT (0 << 15)
+#define SS_PRNG_CONTINUE (1 << 15)
+
+/* SS operation mode - bits 12-13 */
+#define SS_ECB (0 << 12)
+#define SS_CBC (1 << 12)
+#define SS_CNT (2 << 12)
+
+/* Counter width for CNT mode - bits 10-11 */
+#define SS_CNT_16BITS (0 << 10)
+#define SS_CNT_32BITS (1 << 10)
+#define SS_CNT_64BITS (2 << 10)
+
+/* Key size for AES - bits 8-9 */
+#define SS_AES_128BITS (0 << 8)
+#define SS_AES_192BITS (1 << 8)
+#define SS_AES_256BITS (2 << 8)
+
+/* Operation direction - bit 7 */
+#define SS_ENCRYPTION (0 << 7)
+#define SS_DECRYPTION (1 << 7)
+
+/* SS Method - bits 4-6 */
+#define SS_OP_AES (0 << 4)
+#define SS_OP_DES (1 << 4)
+#define SS_OP_3DES (2 << 4)
+#define SS_OP_SHA1 (3 << 4)
+#define SS_OP_MD5 (4 << 4)
+#define SS_OP_PRNG (5 << 4)
+
+/* Data end bit - bit 2 */
+#define SS_DATA_END (1 << 2)
+
+/* PRNG start bit - bit 1 */
+#define SS_PRNG_START (1 << 1)
+
+/* SS Enable bit - bit 0 */
+#define SS_DISABLED (0 << 0)
+#define SS_ENABLED (1 << 0)
+
+/* SS_FCSR configuration values */
+/* RX FIFO status - bit 30 */
+#define SS_RXFIFO_FREE (1 << 30)
+
+/* RX FIFO empty spaces - bits 24-29 */
+#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f)
+
+/* TX FIFO status - bit 22 */
+#define SS_TXFIFO_AVAILABLE (1 << 22)
+
+/* TX FIFO available spaces - bits 16-21 */
+#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f)
+
+#define SS_RXFIFO_EMP_INT_PENDING (1 << 10)
+#define SS_TXFIFO_AVA_INT_PENDING (1 << 8)
+#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2)
+#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0)
+
+/* SS_ICSR configuration values */
+#define SS_ICS_DRQ_ENABLE (1 << 4)
+
+struct sunxi_ss_ctx {
+ void __iomem *base;
+ int irq;
+ struct clk *busclk;
+ struct clk *ssclk;
+ struct device *dev;
+ struct resource *res;
+ void *buf_in; /* pointer to data to be uploaded to the device */
+ size_t buf_in_size; /* size of buf_in */
+ void *buf_out;
+ size_t buf_out_size;
+ struct mutex lock; /* control the use of the device */
+ struct mutex bufout_lock; /* control the use of buf_out*/
+ struct mutex bufin_lock; /* control the sue of buf_in*/
+};
+
+struct sunxi_req_ctx {
+ u8 key[AES_MAX_KEY_SIZE * 8];
+ u32 keylen;
+ u32 mode;
+ u64 byte_count; /* number of bytes "uploaded" to the device */
+ u32 waitbuf; /* a partial word waiting to be completed and
+ uploaded to the device */
+ /* number of bytes to be uploaded in the waitbuf word */
+ unsigned int nbwait;
+};
+
+int sunxi_ss_aes_init(void);
+
Add support for the Security System included in Allwinner SoC A20. The Security System is a hardware cryptographic accelerator that support AES/MD5/SHA1/DES/3DES/PRNG algorithms. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> --- drivers/crypto/sunxi-ss/Makefile | 16 ++ drivers/crypto/sunxi-ss/sunxi-ss-cipher-3des.c | 118 ++++++++ drivers/crypto/sunxi-ss/sunxi-ss-cipher-aes.c | 130 +++++++++ drivers/crypto/sunxi-ss/sunxi-ss-cipher-des.c | 118 ++++++++ drivers/crypto/sunxi-ss/sunxi-ss-cipher.c | 362 +++++++++++++++++++++++++ drivers/crypto/sunxi-ss/sunxi-ss-cipher.h | 8 + drivers/crypto/sunxi-ss/sunxi-ss-hash-md5.c | 69 +++++ drivers/crypto/sunxi-ss/sunxi-ss-hash-sha1.c | 69 +++++ drivers/crypto/sunxi-ss/sunxi-ss-hash.c | 228 ++++++++++++++++ drivers/crypto/sunxi-ss/sunxi-ss-hash.h | 9 + drivers/crypto/sunxi-ss/sunxi-ss-rng.c | 115 ++++++++ drivers/crypto/sunxi-ss/sunxi-ss.c | 190 +++++++++++++ drivers/crypto/sunxi-ss/sunxi-ss.h | 161 +++++++++++ 13 files changed, 1593 insertions(+) create mode 100644 drivers/crypto/sunxi-ss/Makefile create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher-3des.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher-aes.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher-des.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-cipher.h create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash-md5.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash-sha1.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-hash.h create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss-rng.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss.c create mode 100644 drivers/crypto/sunxi-ss/sunxi-ss.h