diff mbox

[3/3,v4] ARM: DTS: fix the chip select gpios definition in the SPI nodes

Message ID 1402578821-27338-3-git-send-email-ch.naveen@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Naveen Krishna Chatradhi June 12, 2014, 1:13 p.m. UTC
This patch replaces the "cs-gpio" from "controller-data" node
as was specified in the old binding and use the standard
"cs-gpios" property expected by the SPI core as is defined in
the new binding.

Respective changes are preposed to spi-s3c64xx.c driver.
@ http://www.spinics.net/lists/linux-samsung-soc/msg32282.html

Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Tomasz Figa <t.figa@samsung.com>
---
 arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 +-
 arch/arm/boot/dts/exynos4412-trats2.dts   |    2 +-
 arch/arm/boot/dts/exynos5250-smdk5250.dts |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

Comments

Javier Martinez Canillas June 12, 2014, 2:07 p.m. UTC | #1
Hello Naveen,

On 06/12/2014 03:13 PM, Naveen Krishna Chatradhi wrote:
> This patch replaces the "cs-gpio" from "controller-data" node
> as was specified in the old binding and use the standard
> "cs-gpios" property expected by the SPI core as is defined in
> the new binding.
> 
> Respective changes are preposed to spi-s3c64xx.c driver.
> @ http://www.spinics.net/lists/linux-samsung-soc/msg32282.html
> 
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Tomasz Figa <t.figa@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 +-
>  arch/arm/boot/dts/exynos4412-trats2.dts   |    2 +-
>  arch/arm/boot/dts/exynos5250-smdk5250.dts |    2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> index 636d166..9191491 100644
> --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
> @@ -169,6 +169,7 @@
>  
>  	spi_2: spi@13940000 {
>  		status = "okay";
> +		cs-gpios = <&gpc1 2 0>;
>  
>  		w25x80@0 {
>  			#address-cells = <1>;
> @@ -178,7 +179,6 @@
>  			spi-max-frequency = <1000000>;
>  
>  			controller-data {
> -				cs-gpio = <&gpc1 2 0>;
>  				samsung,spi-feedback-delay = <0>;
>  			};
>  
> diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
> index 8a558b7..204b0de 100644
> --- a/arch/arm/boot/dts/exynos4412-trats2.dts
> +++ b/arch/arm/boot/dts/exynos4412-trats2.dts
> @@ -512,6 +512,7 @@
>  	spi_1: spi@13930000 {
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&spi1_bus>;
> +		cs-gpios = <&gpb 5 0>;
>  		status = "okay";
>  
>  		s5c73m3_spi: s5c73m3 {
> @@ -519,7 +520,6 @@
>  			spi-max-frequency = <50000000>;
>  			reg = <0>;
>  			controller-data {
> -				cs-gpio = <&gpb 5 0>;
>  				samsung,spi-feedback-delay = <2>;
>  			};
>  		};
> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> index a794a70..0c6433a 100644
> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
> @@ -316,6 +316,7 @@
>  	};
>  
>  	spi_1: spi@12d30000 {
> +		cs-gpios = <&gpa2 5 0>;
>  		status = "okay";
>  
>  		w25q80bw@0 {
> @@ -326,7 +327,6 @@
>  			spi-max-frequency = <1000000>;
>  
>  			controller-data {
> -				cs-gpio = <&gpa2 5 0>;
>  				samsung,spi-feedback-delay = <0>;
>  			};
>  
> 

Looks good to me.

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier
Doug Anderson June 12, 2014, 11:14 p.m. UTC | #2
Hi,

On Thu, Jun 12, 2014 at 6:13 AM, Naveen Krishna Chatradhi
<ch.naveen@samsung.com> wrote:
> This patch replaces the "cs-gpio" from "controller-data" node
> as was specified in the old binding and use the standard
> "cs-gpios" property expected by the SPI core as is defined in
> the new binding.
>
> Respective changes are preposed to spi-s3c64xx.c driver.
> @ http://www.spinics.net/lists/linux-samsung-soc/msg32282.html
>
> Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
> Acked-by: Rob Herring <robh@kernel.org>
> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> Cc: Doug Anderson <dianders@chromium.org>
> Cc: Tomasz Figa <t.figa@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 +-
>  arch/arm/boot/dts/exynos4412-trats2.dts   |    2 +-
>  arch/arm/boot/dts/exynos5250-smdk5250.dts |    2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)

This looks fine, though I will note that you're not very consistent
with the ordering of "cs-gpios" and "status".

Reviewed-by: Doug Anderson <dianders@chromium.org>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 636d166..9191491 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -169,6 +169,7 @@ 
 
 	spi_2: spi@13940000 {
 		status = "okay";
+		cs-gpios = <&gpc1 2 0>;
 
 		w25x80@0 {
 			#address-cells = <1>;
@@ -178,7 +179,6 @@ 
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpc1 2 0>;
 				samsung,spi-feedback-delay = <0>;
 			};
 
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 8a558b7..204b0de 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -512,6 +512,7 @@ 
 	spi_1: spi@13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
+		cs-gpios = <&gpb 5 0>;
 		status = "okay";
 
 		s5c73m3_spi: s5c73m3 {
@@ -519,7 +520,6 @@ 
 			spi-max-frequency = <50000000>;
 			reg = <0>;
 			controller-data {
-				cs-gpio = <&gpb 5 0>;
 				samsung,spi-feedback-delay = <2>;
 			};
 		};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..0c6433a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -316,6 +316,7 @@ 
 	};
 
 	spi_1: spi@12d30000 {
+		cs-gpios = <&gpa2 5 0>;
 		status = "okay";
 
 		w25q80bw@0 {
@@ -326,7 +327,6 @@ 
 			spi-max-frequency = <1000000>;
 
 			controller-data {
-				cs-gpio = <&gpa2 5 0>;
 				samsung,spi-feedback-delay = <0>;
 			};