From patchwork Mon Jun 16 18:46:12 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bjorn Andersson X-Patchwork-Id: 4362201 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id A5E9F9F1C4 for ; Mon, 16 Jun 2014 18:57:29 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id D659F202E5 for ; Mon, 16 Jun 2014 18:57:27 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 0CE98202D1 for ; Mon, 16 Jun 2014 18:57:26 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Wwbvy-0000FB-0J; Mon, 16 Jun 2014 18:47:10 +0000 Received: from seldrel01.sonyericsson.com ([212.209.106.2]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WwbvX-0008Vm-Of for linux-arm-kernel@lists.infradead.org; Mon, 16 Jun 2014 18:46:47 +0000 From: Bjorn Andersson To: Rob Herring , Mark Rutland , Liam Girdwood , Mark Brown , Kumar Gala Subject: [PATCH v3 3/3] regulator: qcom-rpm: Regulator driver for the Qualcomm RPM Date: Mon, 16 Jun 2014 11:46:12 -0700 Message-ID: <1402944372-31901-4-git-send-email-bjorn.andersson@sonymobile.com> X-Mailer: git-send-email 1.8.2.2 In-Reply-To: <1402944372-31901-1-git-send-email-bjorn.andersson@sonymobile.com> References: <1402944372-31901-1-git-send-email-bjorn.andersson@sonymobile.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20140616_114644_282667_D87E7AC0 X-CRM114-Status: GOOD ( 18.12 ) X-Spam-Score: -5.0 (-----) Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, Josh Cartwright , linux-kernel@vger.kernel.org, Lee Jones , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-2.9 required=5.0 tests=BAYES_00,RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Driver for regulators exposed by the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. Signed-off-by: Bjorn Andersson --- drivers/regulator/Kconfig | 12 + drivers/regulator/Makefile | 1 + drivers/regulator/qcom_rpm-regulator.c | 787 +++++++++++++++++++++++++++++++++ 3 files changed, 800 insertions(+) create mode 100644 drivers/regulator/qcom_rpm-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 903eb37..ea5a405 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -423,6 +423,18 @@ config REGULATOR_PFUZE100 Say y here to support the regulators found on the Freescale PFUZE100/PFUZE200 PMIC. +config REGULATOR_QCOM_RPM + tristate "Qualcomm RPM regulator driver" + depends on QCOM_RPM + help + If you say yes to this option, support will be included for the + regulators exposed by the Resource Power Manager found in Qualcomm + 8660, 8960 and 8064 based devices. + + Say M here if you want to include support for the regulators on the + Qualcomm RPM as a module. The module will be named + "qcom_rpm-regulator". + config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12ef277..53b5ce8 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_REGULATOR_MAX77693) += max77693.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o +obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c new file mode 100644 index 0000000..f28ccdb --- /dev/null +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -0,0 +1,787 @@ +/* + * Copyright (c) 2014, Sony Mobile Communications AB. + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX_REQUEST_LEN 2 + +struct request_member { + int word; + unsigned int mask; + int shift; +}; + +struct rpm_reg_parts { + struct request_member mV; /* used if voltage is in mV */ + struct request_member uV; /* used if voltage is in uV */ + struct request_member ip; /* peak current in mA */ + struct request_member pd; /* pull down enable */ + struct request_member ia; /* average current in mA */ + struct request_member fm; /* force mode */ + struct request_member pm; /* power mode */ + struct request_member pc; /* pin control */ + struct request_member pf; /* pin function */ + struct request_member enable_state; /* NCP and switch */ + struct request_member comp_mode; /* NCP */ + struct request_member freq; /* frequency: NCP and SMPS */ + struct request_member freq_clk_src; /* clock source: SMPS */ + struct request_member hpm; /* switch: control OCP and SS */ + int request_len; +}; + +#define FORCE_MODE_IS_2_BITS(reg) \ + ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 3) +#define FORCE_MODE_IS_3_BITS(reg) \ + ((vreg->parts->fm.mask >> vreg->parts->fm.shift) == 7) + +struct qcom_rpm_reg { + struct qcom_rpm *rpm; + + struct mutex lock; + struct device *dev; + struct regulator_desc desc; + const struct rpm_reg_parts *parts; + + int resource; + u32 val[MAX_REQUEST_LEN]; + + int uV; + int is_enabled; +}; + +static const struct rpm_reg_parts rpm8660_ldo_parts = { + .request_len = 2, + .mV = { 0, 0x00000FFF, 0 }, + .ip = { 0, 0x00FFF000, 12 }, + .fm = { 0, 0x03000000, 24 }, + .pc = { 0, 0x3C000000, 26 }, + .pf = { 0, 0xC0000000, 30 }, + .pd = { 1, 0x00000001, 0 }, + .ia = { 1, 0x00001FFE, 1 }, +}; + +static const struct rpm_reg_parts rpm8660_smps_parts = { + .request_len = 2, + .mV = { 0, 0x00000FFF, 0 }, + .ip = { 0, 0x00FFF000, 12 }, + .fm = { 0, 0x03000000, 24 }, + .pc = { 0, 0x3C000000, 26 }, + .pf = { 0, 0xC0000000, 30 }, + .pd = { 1, 0x00000001, 0 }, + .ia = { 1, 0x00001FFE, 1 }, + .freq = { 1, 0x001FE000, 13 }, + .freq_clk_src = { 1, 0x00600000, 21 }, +}; + +static const struct rpm_reg_parts rpm8660_switch_parts = { + .request_len = 1, + .enable_state = { 0, 0x00000001, 0 }, + .pd = { 0, 0x00000002, 1 }, + .pc = { 0, 0x0000003C, 2 }, + .pf = { 0, 0x000000C0, 6 }, + .hpm = { 0, 0x00000300, 8 }, +}; + +static const struct rpm_reg_parts rpm8660_ncp_parts = { + .request_len = 1, + .mV = { 0, 0x00000FFF, 0 }, + .enable_state = { 0, 0x00001000, 12 }, + .comp_mode = { 0, 0x00002000, 13 }, + .freq = { 0, 0x003FC000, 14 }, +}; + +static const struct rpm_reg_parts rpm8960_ldo_parts = { + .request_len = 2, + .uV = { 0, 0x007FFFFF, 0 }, + .pd = { 0, 0x00800000, 23 }, + .pc = { 0, 0x0F000000, 24 }, + .pf = { 0, 0xF0000000, 28 }, + .ip = { 1, 0x000003FF, 0 }, + .ia = { 1, 0x000FFC00, 10 }, + .fm = { 1, 0x00700000, 20 }, +}; + +static const struct rpm_reg_parts rpm8960_smps_parts = { + .request_len = 2, + .uV = { 0, 0x007FFFFF, 0 }, + .pd = { 0, 0x00800000, 23 }, + .pc = { 0, 0x0F000000, 24 }, + .pf = { 0, 0xF0000000, 28 }, + .ip = { 1, 0x000003FF, 0 }, + .ia = { 1, 0x000FFC00, 10 }, + .fm = { 1, 0x00700000, 20 }, + .pm = { 1, 0x00800000, 23 }, + .freq = { 1, 0x1F000000, 24 }, + .freq_clk_src = { 1, 0x60000000, 29 }, +}; + +static const struct rpm_reg_parts rpm8960_switch_parts = { + .request_len = 1, + .enable_state = { 0, 0x00000001, 0 }, + .pd = { 0, 0x00000002, 1 }, + .pc = { 0, 0x0000003C, 2 }, + .pf = { 0, 0x000003C0, 6 }, + .hpm = { 0, 0x00000C00, 10 }, +}; + +static const struct rpm_reg_parts rpm8960_ncp_parts = { + .request_len = 1, + .uV = { 0, 0x007FFFFF, 0 }, + .enable_state = { 0, 0x00800000, 23 }, + .comp_mode = { 0, 0x01000000, 24 }, + .freq = { 0, 0x3E000000, 25 }, +}; + +/* + * Physically available PMIC regulator voltage ranges + */ +static const struct regulator_linear_range pldo_ranges[] = { + REGULATOR_LINEAR_RANGE( 750000, 0, 59, 12500), + REGULATOR_LINEAR_RANGE(1500000, 60, 123, 25000), + REGULATOR_LINEAR_RANGE(3100000, 124, 160, 50000), +}; + +static const struct regulator_linear_range nldo_ranges[] = { + REGULATOR_LINEAR_RANGE( 750000, 0, 63, 12500), +}; + +static const struct regulator_linear_range nldo1200_ranges[] = { + REGULATOR_LINEAR_RANGE( 375000, 0, 59, 6250), + REGULATOR_LINEAR_RANGE( 750000, 60, 123, 12500), +}; + +static const struct regulator_linear_range smps_ranges[] = { + REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500), + REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500), + REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000), +}; + +static const struct regulator_linear_range ftsmps_ranges[] = { + REGULATOR_LINEAR_RANGE( 350000, 0, 6, 50000), + REGULATOR_LINEAR_RANGE( 700000, 7, 63, 12500), + REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000), +}; + +static const struct regulator_linear_range ncp_ranges[] = { + REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000), +}; + +static int rpm_reg_write(struct qcom_rpm_reg *vreg, + const struct request_member *req, + const int value) +{ + if (WARN_ON((value << req->shift) & ~req->mask)) + return -EINVAL; + + vreg->val[req->word] &= ~req->mask; + vreg->val[req->word] |= value << req->shift; + + return qcom_rpm_write(vreg->rpm, + vreg->resource, + vreg->val, + vreg->parts->request_len); +} + +static int rpm_reg_set_mV_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->mV; + int ret = 0; + int uV; + + if (req->mask == 0) + return -EINVAL; + + uV = regulator_list_voltage_linear_range(rdev, selector); + if (uV < 0) + return uV; + + mutex_lock(&vreg->lock); + vreg->uV = uV; + if (vreg->is_enabled) + ret = rpm_reg_write(vreg, req, vreg->uV / 1000); + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_set_uV_sel(struct regulator_dev *rdev, + unsigned selector) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->uV; + int ret = 0; + int uV; + + if (req->mask == 0) + return -EINVAL; + + uV = regulator_list_voltage_linear_range(rdev, selector); + if (uV < 0) + return uV; + + mutex_lock(&vreg->lock); + vreg->uV = uV; + if (vreg->is_enabled) + ret = rpm_reg_write(vreg, req, vreg->uV); + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_get_voltage(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + + return vreg->uV; +} + +static int rpm_reg_mV_enable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->mV; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, vreg->uV / 1000); + if (!ret) + vreg->is_enabled = 1; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_uV_enable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->uV; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, vreg->uV); + if (!ret) + vreg->is_enabled = 1; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_switch_enable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->enable_state; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, 1); + if (!ret) + vreg->is_enabled = 1; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_mV_disable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->mV; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, 0); + if (!ret) + vreg->is_enabled = 0; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_uV_disable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->uV; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, 0); + if (!ret) + vreg->is_enabled = 0; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_switch_disable(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + const struct rpm_reg_parts *parts = vreg->parts; + const struct request_member *req = &parts->enable_state; + int ret; + + if (req->mask == 0) + return -EINVAL; + + mutex_lock(&vreg->lock); + ret = rpm_reg_write(vreg, req, 0); + if (!ret) + vreg->is_enabled = 0; + mutex_unlock(&vreg->lock); + + return ret; +} + +static int rpm_reg_is_enabled(struct regulator_dev *rdev) +{ + struct qcom_rpm_reg *vreg = rdev_get_drvdata(rdev); + + return vreg->is_enabled; +} + +static struct regulator_ops uV_ops = { + .list_voltage = regulator_list_voltage_linear_range, + + .set_voltage_sel = rpm_reg_set_uV_sel, + .get_voltage = rpm_reg_get_voltage, + + .enable = rpm_reg_uV_enable, + .disable = rpm_reg_uV_disable, + .is_enabled = rpm_reg_is_enabled, +}; + +static struct regulator_ops mV_ops = { + .list_voltage = regulator_list_voltage_linear_range, + + .set_voltage_sel = rpm_reg_set_mV_sel, + .get_voltage = rpm_reg_get_voltage, + + .enable = rpm_reg_mV_enable, + .disable = rpm_reg_mV_disable, + .is_enabled = rpm_reg_is_enabled, +}; + +static struct regulator_ops switch_ops = { + .enable = rpm_reg_switch_enable, + .disable = rpm_reg_switch_disable, + .is_enabled = rpm_reg_is_enabled, +}; + +/* + * PM8058 regulators + */ +static const struct qcom_rpm_reg pm8058_pldo = { + .desc.linear_ranges = pldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), + .desc.n_voltages = 161, + .desc.ops = &mV_ops, + .parts = &rpm8660_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8058_nldo = { + .desc.linear_ranges = nldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), + .desc.n_voltages = 64, + .desc.ops = &mV_ops, + .parts = &rpm8660_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8058_smps = { + .desc.linear_ranges = smps_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges), + .desc.n_voltages = 154, + .desc.ops = &mV_ops, + .parts = &rpm8660_smps_parts, +}; + +static const struct qcom_rpm_reg pm8058_ncp = { + .desc.linear_ranges = ncp_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges), + .desc.n_voltages = 32, + .desc.ops = &mV_ops, + .parts = &rpm8660_ncp_parts, +}; + +static const struct qcom_rpm_reg pm8058_switch = { + .desc.ops = &switch_ops, + .parts = &rpm8660_switch_parts, +}; + +/* + * PM8901 regulators + */ +static const struct qcom_rpm_reg pm8901_pldo = { + .desc.linear_ranges = pldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), + .desc.n_voltages = 161, + .desc.ops = &mV_ops, + .parts = &rpm8660_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8901_nldo = { + .desc.linear_ranges = nldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), + .desc.n_voltages = 64, + .desc.ops = &mV_ops, + .parts = &rpm8660_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8901_ftsmps = { + .desc.linear_ranges = ftsmps_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges), + .desc.n_voltages = 101, + .desc.ops = &mV_ops, + .parts = &rpm8660_smps_parts, +}; + +static const struct qcom_rpm_reg pm8901_switch = { + .desc.ops = &switch_ops, + .parts = &rpm8660_switch_parts, +}; + +/* + * PM8921 regulators + */ +static const struct qcom_rpm_reg pm8921_pldo = { + .desc.linear_ranges = pldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(pldo_ranges), + .desc.n_voltages = 161, + .desc.ops = &uV_ops, + .parts = &rpm8960_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8921_nldo = { + .desc.linear_ranges = nldo_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(nldo_ranges), + .desc.n_voltages = 64, + .desc.ops = &uV_ops, + .parts = &rpm8960_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8921_nldo1200 = { + .desc.linear_ranges = nldo1200_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(nldo1200_ranges), + .desc.n_voltages = 124, + .desc.ops = &uV_ops, + .parts = &rpm8960_ldo_parts, +}; + +static const struct qcom_rpm_reg pm8921_smps = { + .desc.linear_ranges = smps_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(smps_ranges), + .desc.n_voltages = 154, + .desc.ops = &uV_ops, + .parts = &rpm8960_smps_parts, +}; + +static const struct qcom_rpm_reg pm8921_ftsmps = { + .desc.linear_ranges = ftsmps_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(ftsmps_ranges), + .desc.n_voltages = 101, + .desc.ops = &uV_ops, + .parts = &rpm8960_smps_parts, +}; + +static const struct qcom_rpm_reg pm8921_ncp = { + .desc.linear_ranges = ncp_ranges, + .desc.n_linear_ranges = ARRAY_SIZE(ncp_ranges), + .desc.n_voltages = 32, + .desc.ops = &uV_ops, + .parts = &rpm8960_ncp_parts, +}; + +static const struct qcom_rpm_reg pm8921_switch = { + .desc.ops = &switch_ops, + .parts = &rpm8960_switch_parts, +}; + +static const struct of_device_id rpm_of_match[] = { + { .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo }, + { .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo }, + { .compatible = "qcom,rpm-pm8058-smps", .data = &pm8058_smps }, + { .compatible = "qcom,rpm-pm8058-ncp", .data = &pm8058_ncp }, + { .compatible = "qcom,rpm-pm8058-switch", .data = &pm8058_switch }, + + { .compatible = "qcom,rpm-pm8901-pldo", .data = &pm8901_pldo }, + { .compatible = "qcom,rpm-pm8901-nldo", .data = &pm8901_nldo }, + { .compatible = "qcom,rpm-pm8901-ftsmps", .data = &pm8901_ftsmps }, + { .compatible = "qcom,rpm-pm8901-switch", .data = &pm8901_switch }, + + { .compatible = "qcom,rpm-pm8921-pldo", .data = &pm8921_pldo }, + { .compatible = "qcom,rpm-pm8921-nldo", .data = &pm8921_nldo }, + { .compatible = "qcom,rpm-pm8921-nldo1200", .data = &pm8921_nldo1200 }, + { .compatible = "qcom,rpm-pm8921-smps", .data = &pm8921_smps }, + { .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps }, + { .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp }, + { .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch }, + { } +}; +MODULE_DEVICE_TABLE(of, rpm_of_match); + +static int rpm_reg_set(struct qcom_rpm_reg *vreg, + const struct request_member *req, + const int value) +{ + if (req->mask == 0 || (value << req->shift) & ~req->mask) + return -EINVAL; + + vreg->val[req->word] &= ~req->mask; + vreg->val[req->word] |= value << req->shift; + + return 0; +} + +static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg) +{ + static const int freq_table[] = { + 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000, + 2400000, 2130000, 1920000, 1750000, 1600000, 1480000, 1370000, + 1280000, 1200000, + + }; + const char *key; + u32 freq; + int ret; + int i; + + key = "qcom,switch-mode-frequency"; + ret = of_property_read_u32(dev->of_node, key, &freq); + if (ret) { + dev_err(dev, "regulator requires %s property\n", key); + return -EINVAL; + } + + for (i = 0; i < ARRAY_SIZE(freq_table); i++) { + if (freq == freq_table[i]) { + rpm_reg_set(vreg, &vreg->parts->freq, i + 1); + return 0; + } + } + + dev_err(dev, "invalid frequency %d\n", freq); + return -EINVAL; +} + +static int rpm_reg_of_select_one(struct device *dev, + const char * const keys[], + const int count, int def) +{ + int found = -1; + int i; + + for (i = 0; i < count; i++) { + if (!of_property_read_bool(dev->of_node, keys[i])) + continue; + + if (found >= 0) { + dev_err(dev, "%s and %s are mutually exclusive\n", + keys[i], keys[found]); + return -EINVAL; + } + found = i; + } + + if (found == -1) + return def; + + return found; +} + +static int rpm_reg_probe(struct platform_device *pdev) +{ + struct regulator_init_data *initdata; + const struct qcom_rpm_reg *template; + const struct of_device_id *match; + struct regulator_config config = { 0 }; + struct regulator_dev *rdev; + struct qcom_rpm_reg *vreg; + const char *key; + u32 val; + int ret; + + match = of_match_device(rpm_of_match, &pdev->dev); + template = match->data; + + initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node); + if (!initdata) + return -EINVAL; + + vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL); + if (!vreg) { + dev_err(&pdev->dev, "failed to allocate vreg\n"); + return -ENOMEM; + } + memcpy(vreg, template, sizeof(*vreg)); + mutex_init(&vreg->lock); + vreg->dev = &pdev->dev; + vreg->desc.id = -1; + vreg->desc.owner = THIS_MODULE; + vreg->desc.type = REGULATOR_VOLTAGE; + vreg->desc.name = pdev->dev.of_node->name; + + vreg->rpm = dev_get_qcom_rpm(pdev->dev.parent); + if (!vreg->rpm) { + dev_err(&pdev->dev, "unable to retrieve handle to rpm\n"); + return -ENODEV; + } + + key = "reg"; + ret = of_property_read_u32(pdev->dev.of_node, key, &val); + if (ret) { + dev_err(&pdev->dev, "failed to read %s\n", key); + return ret; + } + vreg->resource = val; + + if ((vreg->parts->uV.mask || vreg->parts->mV.mask) && + (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) { + dev_err(&pdev->dev, "no voltage specified for regulator\n"); + return -EINVAL; + } + + key = "bias-pull-down"; + if (of_property_read_bool(pdev->dev.of_node, key)) { + ret = rpm_reg_set(vreg, &vreg->parts->pd, 1); + if (ret) { + dev_err(&pdev->dev, "%s is invalid", key); + return ret; + } + } + + if (vreg->parts->freq.mask) { + ret = rpm_reg_of_parse_freq(&pdev->dev, vreg); + if (ret < 0) + return ret; + } + + if (vreg->parts->pm.mask) { + static const char * const keys[] = { + "qcom,power-mode-hysteretic", + "qcom,power-mode-pwm", + }; + + ret = rpm_reg_of_select_one(&pdev->dev, + keys, ARRAY_SIZE(keys), 1); + if (ret < 0) + return ret; + + ret = rpm_reg_set(vreg, &vreg->parts->pm, ret); + if (ret) { + dev_err(&pdev->dev, "failed to set power mode\n"); + return ret; + } + } + + if (FORCE_MODE_IS_2_BITS(vreg)) { + static const char * const keys[] = { + "qcom,force-mode-none", + "qcom,force-mode-lpm", + "qcom,force-mode-hpm" + }; + + ret = rpm_reg_of_select_one(&pdev->dev, + keys, ARRAY_SIZE(keys), 0); + if (ret < 0) + return ret; + + ret = rpm_reg_set(vreg, &vreg->parts->fm, ret); + if (ret) { + dev_err(&pdev->dev, "failed to set force mode\n"); + return ret; + } + } else if (FORCE_MODE_IS_3_BITS(vreg)) { + static const char * const keys[] = { + "qcom,force-mode-none", + "qcom,force-mode-lpm", + "qcom,force-mode-auto", + "qcom,force-mode-hpm", + "qcom,force-mode-bypass", + }; + + ret = rpm_reg_of_select_one(&pdev->dev, + keys, ARRAY_SIZE(keys), 0); + if (ret < 0) + return ret; + + ret = rpm_reg_set(vreg, &vreg->parts->fm, ret); + if (ret) { + dev_err(&pdev->dev, "failed to set force mode\n"); + return ret; + } + } + + config.dev = &pdev->dev; + config.init_data = initdata; + config.driver_data = vreg; + config.of_node = pdev->dev.of_node; + rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "can't register regulator\n"); + return PTR_ERR(rdev); + } + + return 0; +} + +static struct platform_driver rpm_reg_driver = { + .probe = rpm_reg_probe, + .driver = { + .name = "qcom_rpm_reg", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(rpm_of_match), + }, +}; + +static int __init rpm_reg_init(void) +{ + return platform_driver_register(&rpm_reg_driver); +} +subsys_initcall(rpm_reg_init); + +static void __exit rpm_reg_exit(void) +{ + platform_driver_unregister(&rpm_reg_driver); +} +module_exit(rpm_reg_exit) + +MODULE_DESCRIPTION("Qualcomm RPM regulator driver"); +MODULE_LICENSE("GPL v2");