| Message ID | 1403178640-16052-2-git-send-email-mperttunen@nvidia.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index 16082c0..896c24b 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1617,6 +1617,11 @@ nvidia,core-pwr-off-time = <61036>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + nvidia,thermtrip-pmu-i2c-addr = <0x40>; + nvidia,thermtrip-i2c-controller = <4>; + nvidia,thermtrip-reg-addr = <0x36>; + nvidia,thermtrip-reg-data = <0x2>; }; /* SD card */
This adds the required information to reset the board during an overheating situation to the Jetson TK1 device tree. The thermal reset is handled by the PMC by sending an I2C message to the PMIC. The entries specify the I2C message to be sent. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 5 +++++ 1 file changed, 5 insertions(+)