[v2,11/12] ARM: dts: berlin: add BG2CD nodes for USB support

Commit Message

Antoine Tenart June 24, 2014, 10:35 a.m. UTC

From: Sebastian Hesselbarth <[e-mail]>

Adds nodes describing the Marvell Berlin BG2CD USB PHY and USB. The BG2CD
SoC has 2 USB ChipIdea controllers, with usb0 host-only and usb1 dual-role
capable.

Signed-off-by: Sebastian Hesselbarth <[e-mail]>
---
 arch/arm/boot/dts/berlin2cd.dtsi | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Patch

diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 68f7032b4686..d35c9fbaa397 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -66,6 +66,22 @@ 
 			clocks = <&chip CLKID_TWD>;
 		};
 
+		usb_phy0: usb-phy@b74000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 23>;
+			status = "disabled";
+		};
+
+		usb_phy1: usb-phy@b78000 {
+			compatible = "marvell,berlin2cd-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x178 24>;
+			status = "disabled";
+		};
+
 		apb@e80000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -242,6 +258,24 @@ 
 			};
 		};
 
+		usb0: usb@ed0000 {
+			compatible = "chipidea-usb";
+			reg = <0xed0000 0x200>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			usb-phy = <&usb_phy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea-usb";
+			reg = <0xee0000 0x200>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			usb-phy = <&usb_phy1>;
+			status = "disabled";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;