diff mbox

[V6,2/2] arm: mm: Modify pte_write and pmd_write logic for LPAE

Message ID 1404389173-4246-3-git-send-email-steve.capper@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Steve Capper July 3, 2014, 12:06 p.m. UTC
For LPAE, we have the following means for encoding writable or dirty
ptes:
                              L_PTE_DIRTY       L_PTE_RDONLY
    !pte_dirty && !pte_write        0               1
    !pte_dirty && pte_write         0               1
    pte_dirty && !pte_write         1               1
    pte_dirty && pte_write          1               0

So we can't distinguish between writeable clean ptes and read only
ptes. This can cause problems with ptes being incorrectly flagged as
read only when they are writeable but not dirty.

This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58,
and adds additional logic to set AP[2] whenever the pte is read only
or not dirty. That way we can distinguish between clean writeable ptes
and read only ptes.

HugeTLB pages will use this new logic automatically.

We need to add some logic to Transparent HugePages to ensure that they
correctly interpret the revised pgprot permissions (L_PTE_RDONLY has
moved and no longer matches PMD_SECT_AP2). In the process of revising
THP, the names of the PMD software bits have been prefixed with L_ to
make them easier to distinguish from their hardware bit counterparts.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
---
 arch/arm/include/asm/pgtable-3level-hwdef.h |  3 ++-
 arch/arm/include/asm/pgtable-3level.h       | 41 +++++++++++++++++------------
 arch/arm/mm/dump.c                          |  4 +--
 arch/arm/mm/proc-v7-3level.S                |  9 +++++--
 4 files changed, 35 insertions(+), 22 deletions(-)

Comments

Russell King - ARM Linux July 3, 2014, 12:18 p.m. UTC | #1
On Thu, Jul 03, 2014 at 01:06:13PM +0100, Steve Capper wrote:
> diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
> index c508f41..00a1cf9 100644
> --- a/arch/arm/mm/dump.c
> +++ b/arch/arm/mm/dump.c
> @@ -126,8 +126,8 @@ static const struct prot_bits section_bits[] = {
>  		.val	= PMD_SECT_USER,
>  		.set	= "USR",
>  	}, {
> -		.mask	= PMD_SECT_RDONLY,
> -		.val	= PMD_SECT_RDONLY,
> +		.mask	= PMD_SECT_AP2,
> +		.val	= PMD_SECT_AP2,

I think we're almost there, except for this hunk, which I think can
just be deleted.

We want to report what the PTEs/PMDs are requested to be, not what they
physically are at the point where we dump them out.  In other words, we
don't want to know that they're physically read-only because the dirty
bit isn't set - what we want to know is that they have permission to be
written to if the dirty bit were to be set.

The reasoning is that we want the dump to reflect what is possible -
for example, we want to know whether a page can be executed _and_ written
to.

Consider the case where the dirty bit is implemented in hardware.
Steve Capper July 3, 2014, 1:47 p.m. UTC | #2
On Thu, Jul 03, 2014 at 01:18:08PM +0100, Russell King - ARM Linux wrote:
> On Thu, Jul 03, 2014 at 01:06:13PM +0100, Steve Capper wrote:
> > diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
> > index c508f41..00a1cf9 100644
> > --- a/arch/arm/mm/dump.c
> > +++ b/arch/arm/mm/dump.c
> > @@ -126,8 +126,8 @@ static const struct prot_bits section_bits[] = {
> >  		.val	= PMD_SECT_USER,
> >  		.set	= "USR",
> >  	}, {
> > -		.mask	= PMD_SECT_RDONLY,
> > -		.val	= PMD_SECT_RDONLY,
> > +		.mask	= PMD_SECT_AP2,
> > +		.val	= PMD_SECT_AP2,
> 
> I think we're almost there, except for this hunk, which I think can
> just be deleted.
> 
> We want to report what the PTEs/PMDs are requested to be, not what they
> physically are at the point where we dump them out.  In other words, we
> don't want to know that they're physically read-only because the dirty
> bit isn't set - what we want to know is that they have permission to be
> written to if the dirty bit were to be set.
> 
> The reasoning is that we want the dump to reflect what is possible -
> for example, we want to know whether a page can be executed _and_ written
> to.
> 
> Consider the case where the dirty bit is implemented in hardware.

Thanks Russell, that makes more sense. I'll change the mask and val to:
L_PMD_SECT_RDONLY, to catch the software bit.

Cheers,
diff mbox

Patch

diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index 626989f..9fd61c7 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -43,7 +43,7 @@ 
 #define PMD_SECT_BUFFERABLE	(_AT(pmdval_t, 1) << 2)
 #define PMD_SECT_CACHEABLE	(_AT(pmdval_t, 1) << 3)
 #define PMD_SECT_USER		(_AT(pmdval_t, 1) << 6)		/* AP[1] */
-#define PMD_SECT_RDONLY		(_AT(pmdval_t, 1) << 7)		/* AP[2] */
+#define PMD_SECT_AP2		(_AT(pmdval_t, 1) << 7)		/* read only */
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
 #define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
 #define PMD_SECT_nG		(_AT(pmdval_t, 1) << 11)
@@ -72,6 +72,7 @@ 
 #define PTE_TABLE_BIT		(_AT(pteval_t, 1) << 1)
 #define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
 #define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define PTE_AP2			(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define PTE_EXT_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_EXT_AF		(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* nG */
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 34f371c..06e0bc0 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -79,18 +79,19 @@ 
 #define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Present */
 #define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
 #define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
-#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define L_PTE_YOUNG		(_AT(pteval_t, 1) << 10)	/* AF */
 #define L_PTE_XN		(_AT(pteval_t, 1) << 54)	/* XN */
-#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)	/* unused */
-#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)	/* unused */
+#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)
+#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 57)	/* PROT_NONE */
+#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 58)	/* READ ONLY */
 
-#define PMD_SECT_VALID		(_AT(pmdval_t, 1) << 0)
-#define PMD_SECT_DIRTY		(_AT(pmdval_t, 1) << 55)
-#define PMD_SECT_SPLITTING	(_AT(pmdval_t, 1) << 56)
-#define PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
+#define L_PMD_SECT_VALID	(_AT(pmdval_t, 1) << 0)
+#define L_PMD_SECT_DIRTY	(_AT(pmdval_t, 1) << 55)
+#define L_PMD_SECT_SPLITTING	(_AT(pmdval_t, 1) << 56)
+#define L_PMD_SECT_NONE		(_AT(pmdval_t, 1) << 57)
+#define L_PMD_SECT_RDONLY	(_AT(pteval_t, 1) << 58)
 
 /*
  * To be used in assembly code with the upper page attributes.
@@ -214,24 +215,25 @@  static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 #define pmd_young(pmd)		(pmd_isset((pmd), PMD_SECT_AF))
 
 #define __HAVE_ARCH_PMD_WRITE
-#define pmd_write(pmd)		(pmd_isclear((pmd), PMD_SECT_RDONLY))
+#define pmd_write(pmd)		(pmd_isclear((pmd), L_PMD_SECT_RDONLY))
+#define pmd_dirty(pmd)		(pmd_isset((pmd), L_PMD_SECT_DIRTY))
 
 #define pmd_hugewillfault(pmd)	(!pmd_young(pmd) || !pmd_write(pmd))
 #define pmd_thp_or_huge(pmd)	(pmd_huge(pmd) || pmd_trans_huge(pmd))
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 #define pmd_trans_huge(pmd)	(pmd_val(pmd) && !pmd_table(pmd))
-#define pmd_trans_splitting(pmd) (pmd_isset((pmd), PMD_SECT_SPLITTING))
+#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING))
 #endif
 
 #define PMD_BIT_FUNC(fn,op) \
 static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; }
 
-PMD_BIT_FUNC(wrprotect,	|= PMD_SECT_RDONLY);
+PMD_BIT_FUNC(wrprotect,	|= L_PMD_SECT_RDONLY);
 PMD_BIT_FUNC(mkold,	&= ~PMD_SECT_AF);
-PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING);
-PMD_BIT_FUNC(mkwrite,   &= ~PMD_SECT_RDONLY);
-PMD_BIT_FUNC(mkdirty,   |= PMD_SECT_DIRTY);
+PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING);
+PMD_BIT_FUNC(mkwrite,   &= ~L_PMD_SECT_RDONLY);
+PMD_BIT_FUNC(mkdirty,   |= L_PMD_SECT_DIRTY);
 PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 #define pmd_mkhuge(pmd)		(__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT))
@@ -245,8 +247,8 @@  PMD_BIT_FUNC(mkyoung,   |= PMD_SECT_AF);
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
 {
-	const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | PMD_SECT_RDONLY |
-				PMD_SECT_VALID | PMD_SECT_NONE;
+	const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | L_PMD_SECT_RDONLY |
+				L_PMD_SECT_VALID | L_PMD_SECT_NONE;
 	pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask);
 	return pmd;
 }
@@ -257,8 +259,13 @@  static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 	BUG_ON(addr >= TASK_SIZE);
 
 	/* create a faulting entry if PROT_NONE protected */
-	if (pmd_val(pmd) & PMD_SECT_NONE)
-		pmd_val(pmd) &= ~PMD_SECT_VALID;
+	if (pmd_val(pmd) & L_PMD_SECT_NONE)
+		pmd_val(pmd) &= ~L_PMD_SECT_VALID;
+
+	if (pmd_write(pmd) && pmd_dirty(pmd))
+		pmd_val(pmd) &= ~PMD_SECT_AP2;
+	else
+		pmd_val(pmd) |= PMD_SECT_AP2;
 
 	*pmdp = __pmd(pmd_val(pmd) | PMD_SECT_nG);
 	flush_pmd_entry(pmdp);
diff --git a/arch/arm/mm/dump.c b/arch/arm/mm/dump.c
index c508f41..00a1cf9 100644
--- a/arch/arm/mm/dump.c
+++ b/arch/arm/mm/dump.c
@@ -126,8 +126,8 @@  static const struct prot_bits section_bits[] = {
 		.val	= PMD_SECT_USER,
 		.set	= "USR",
 	}, {
-		.mask	= PMD_SECT_RDONLY,
-		.val	= PMD_SECT_RDONLY,
+		.mask	= PMD_SECT_AP2,
+		.val	= PMD_SECT_AP2,
 		.set	= "ro",
 		.clear	= "RW",
 #elif __LINUX_ARM_ARCH__ >= 6
diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S
index 22e3ad6..eb81123 100644
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -86,8 +86,13 @@  ENTRY(cpu_v7_set_pte_ext)
 	tst	rh, #1 << (57 - 32)		@ L_PTE_NONE
 	bicne	rl, #L_PTE_VALID
 	bne	1f
-	tst	rh, #1 << (55 - 32)		@ L_PTE_DIRTY
-	orreq	rl, #L_PTE_RDONLY
+
+	eor	ip, rh, #1 << (55 - 32)	@ toggle L_PTE_DIRTY in temp reg to
+					@ test for !L_PTE_DIRTY || L_PTE_RDONLY
+	tst	ip, #1 << (55 - 32) | 1 << (58 - 32)
+	orrne	rl, #PTE_AP2
+	biceq	rl, #PTE_AP2
+
 1:	strd	r2, r3, [r0]
 	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte