diff mbox

[v2,2/8] spi: sun4i: add DMA support

Message ID 1404619518-7592-3-git-send-email-emilio@elopez.com.ar (mailing list archive)
State New, archived
Headers show

Commit Message

Emilio López July 6, 2014, 4:05 a.m. UTC
This patch adds DMA support for 64 byte transfers on the sun4i SPI
controller. Bigger transfers did not seem to work when tested, and if
the hardware actually supports those, it will need further
investigation as to how to issue them correctly.

Signed-off-by: Emilio López <emilio@elopez.com.ar>
---

Changes from v1:
 * remove 64 byte limitation on transfers
 * wrap stuff so it fits better in 80 cols

 drivers/spi/spi-sun4i.c | 155 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 144 insertions(+), 11 deletions(-)

Comments

Emilio López July 6, 2014, 10:49 p.m. UTC | #1
El 06/07/14 01:05, Emilio López escribió:
> This patch adds DMA support for 64 byte transfers on the sun4i SPI
> controller. Bigger transfers did not seem to work when tested, and if
> the hardware actually supports those, it will need further
> investigation as to how to issue them correctly.

It seems I forgot to update this commit message; it should be something 
like:

This patch adds support for 64 byte or bigger transfers on the
sun4i SPI controller. Said transfers will be performed via DMA.

Many thanks to patapovich on #linux-sunxi for making me notice this.

Cheers,

Emilio
Maxime Ripard July 10, 2014, 12:22 p.m. UTC | #2
Hi Emilio,

On Sun, Jul 06, 2014 at 01:05:09AM -0300, Emilio López wrote:
> This patch adds DMA support for 64 byte transfers on the sun4i SPI
> controller. Bigger transfers did not seem to work when tested, and if
> the hardware actually supports those, it will need further
> investigation as to how to issue them correctly.
> 
> Signed-off-by: Emilio López <emilio@elopez.com.ar>

This patch looks fine from a quick look, but you should put Mark Brown
in the recipients, since he's the SPI maintainer, and will probably
have a sharper look.

Thanks!
Maxim
Emilio López July 10, 2014, 4:20 p.m. UTC | #3
Hi,

El 10/07/14 09:22, Maxime Ripard escribió:
> Hi Emilio,
>
> On Sun, Jul 06, 2014 at 01:05:09AM -0300, Emilio López wrote:
>> This patch adds DMA support for 64 byte transfers on the sun4i SPI
>> controller. Bigger transfers did not seem to work when tested, and if
>> the hardware actually supports those, it will need further
>> investigation as to how to issue them correctly.
>>
>> Signed-off-by: Emilio López <emilio@elopez.com.ar>
>
> This patch looks fine from a quick look, but you should put Mark Brown
> in the recipients, since he's the SPI maintainer, and will probably
> have a sharper look.

Thanks for the heads up, I'll Cc him as well as the SPI list on v3

Cheers!

Emilio
diff mbox

Patch

diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
index 85204c9..e674100 100644
--- a/drivers/spi/spi-sun4i.c
+++ b/drivers/spi/spi-sun4i.c
@@ -14,6 +14,8 @@ 
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/module.h>
@@ -34,6 +36,7 @@ 
 #define SUN4I_CTL_CPHA				BIT(2)
 #define SUN4I_CTL_CPOL				BIT(3)
 #define SUN4I_CTL_CS_ACTIVE_LOW			BIT(4)
+#define SUN4I_CTL_DMAMC_DEDICATED		BIT(5)
 #define SUN4I_CTL_LMTF				BIT(6)
 #define SUN4I_CTL_TF_RST			BIT(8)
 #define SUN4I_CTL_RF_RST			BIT(9)
@@ -51,6 +54,8 @@ 
 #define SUN4I_INT_STA_REG		0x10
 
 #define SUN4I_DMA_CTL_REG		0x14
+#define SUN4I_DMA_CTL_RF_READY			BIT(0)
+#define SUN4I_DMA_CTL_TF_NOT_FULL		BIT(10)
 
 #define SUN4I_WAIT_REG			0x18
 
@@ -84,6 +89,9 @@  struct sun4i_spi {
 	const u8		*tx_buf;
 	u8			*rx_buf;
 	int			len;
+
+	struct dma_chan		*rx_dma_chan;
+	struct dma_chan		*tx_dma_chan;
 };
 
 static inline u32 sun4i_spi_read(struct sun4i_spi *sspi, u32 reg)
@@ -130,6 +138,24 @@  static inline void sun4i_spi_fill_fifo(struct sun4i_spi *sspi, int len)
 	}
 }
 
+static bool sun4i_spi_can_dma(struct spi_master *master,
+			      struct spi_device *spi,
+			      struct spi_transfer *tfr)
+{
+	return tfr->len >= SUN4I_FIFO_DEPTH;
+}
+
+static int sun4i_spi_prepare_message(struct spi_master *master,
+				     struct spi_message *msg)
+{
+	struct sun4i_spi *sspi = spi_master_get_devdata(master);
+
+	master->dma_rx = sspi->rx_dma_chan;
+	master->dma_tx = sspi->tx_dma_chan;
+
+	return 0;
+}
+
 static void sun4i_spi_set_cs(struct spi_device *spi, bool enable)
 {
 	struct sun4i_spi *sspi = spi_master_get_devdata(spi->master);
@@ -169,15 +195,12 @@  static int sun4i_spi_transfer_one(struct spi_master *master,
 				  struct spi_transfer *tfr)
 {
 	struct sun4i_spi *sspi = spi_master_get_devdata(master);
+	struct dma_async_tx_descriptor *desc_tx = NULL, *desc_rx = NULL;
 	unsigned int mclk_rate, div, timeout;
 	unsigned int tx_len = 0;
 	int ret = 0;
 	u32 reg;
 
-	/* We don't support transfer larger than the FIFO */
-	if (tfr->len > SUN4I_FIFO_DEPTH)
-		return -EINVAL;
-
 	reinit_completion(&sspi->done);
 	sspi->tx_buf = tfr->tx_buf;
 	sspi->rx_buf = tfr->rx_buf;
@@ -186,7 +209,6 @@  static int sun4i_spi_transfer_one(struct spi_master *master,
 	/* Clear pending interrupts */
 	sun4i_spi_write(sspi, SUN4I_INT_STA_REG, ~0);
 
-
 	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
 
 	/* Reset FIFOs */
@@ -269,12 +291,63 @@  static int sun4i_spi_transfer_one(struct spi_master *master,
 	sun4i_spi_write(sspi, SUN4I_BURST_CNT_REG, SUN4I_BURST_CNT(tfr->len));
 	sun4i_spi_write(sspi, SUN4I_XMIT_CNT_REG, SUN4I_XMIT_CNT(tx_len));
 
-	/* Fill the TX FIFO */
-	sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
-
 	/* Enable the interrupts */
 	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, SUN4I_INT_CTL_TC);
 
+	if (sun4i_spi_can_dma(master, spi, tfr)) {
+		dev_dbg(&sspi->master->dev, "Using DMA mode for transfer\n");
+
+		if (sspi->tx_buf) {
+			desc_tx = dmaengine_prep_slave_sg(sspi->tx_dma_chan,
+					tfr->tx_sg.sgl, tfr->tx_sg.nents,
+					DMA_TO_DEVICE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+			if (!desc_tx) {
+				dev_err(&sspi->master->dev,
+					"Couldn't prepare dma slave\n");
+				return -EIO;
+			}
+
+			dmaengine_submit(desc_tx);
+		}
+
+		if (sspi->rx_buf) {
+			desc_rx = dmaengine_prep_slave_sg(sspi->rx_dma_chan,
+					tfr->rx_sg.sgl, tfr->rx_sg.nents,
+					DMA_FROM_DEVICE,
+					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+			if (!desc_rx) {
+				dev_err(&sspi->master->dev,
+					"Couldn't prepare dma slave\n");
+				return -EIO;
+			}
+
+			dmaengine_submit(desc_rx);
+		}
+
+		/* Enable DMA requests */
+		reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
+		sun4i_spi_write(sspi, SUN4I_CTL_REG,
+				reg | SUN4I_CTL_DMAMC_DEDICATED);
+		sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG,
+				SUN4I_DMA_CTL_TF_NOT_FULL |
+				SUN4I_DMA_CTL_RF_READY);
+
+		dma_async_issue_pending(sspi->rx_dma_chan);
+		dma_async_issue_pending(sspi->tx_dma_chan);
+	} else {
+		dev_dbg(&sspi->master->dev, "Using PIO mode for transfer\n");
+
+		/* Disable DMA requests */
+		reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
+		sun4i_spi_write(sspi, SUN4I_CTL_REG,
+				reg & ~SUN4I_CTL_DMAMC_DEDICATED);
+		sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, 0);
+
+		/* Fill the TX FIFO */
+		sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
+	}
+
 	/* Start the transfer */
 	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
 	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
@@ -286,7 +359,12 @@  static int sun4i_spi_transfer_one(struct spi_master *master,
 		goto out;
 	}
 
-	sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+	if (sun4i_spi_can_dma(master, spi, tfr) && desc_rx) {
+		/* The receive transfer should be the last one to finish */
+		dma_wait_for_async_tx(desc_rx);
+	} else {
+		sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
+	}
 
 out:
 	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
@@ -351,6 +429,7 @@  static int sun4i_spi_runtime_suspend(struct device *dev)
 
 static int sun4i_spi_probe(struct platform_device *pdev)
 {
+	struct dma_slave_config dma_sconfig;
 	struct spi_master *master;
 	struct sun4i_spi *sspi;
 	struct resource	*res;
@@ -386,7 +465,10 @@  static int sun4i_spi_probe(struct platform_device *pdev)
 		goto err_free_master;
 	}
 
+	init_completion(&sspi->done);
 	sspi->master = master;
+	master->can_dma = sun4i_spi_can_dma;
+	master->prepare_message = sun4i_spi_prepare_message;
 	master->set_cs = sun4i_spi_set_cs;
 	master->transfer_one = sun4i_spi_transfer_one;
 	master->num_chipselect = 4;
@@ -409,7 +491,45 @@  static int sun4i_spi_probe(struct platform_device *pdev)
 		goto err_free_master;
 	}
 
-	init_completion(&sspi->done);
+	sspi->tx_dma_chan = dma_request_slave_channel_reason(&pdev->dev, "tx");
+	if (IS_ERR(sspi->tx_dma_chan)) {
+		dev_err(&pdev->dev, "Unable to acquire DMA channel TX\n");
+		ret = PTR_ERR(sspi->tx_dma_chan);
+		goto err_free_master;
+	}
+
+	dma_sconfig.direction = DMA_MEM_TO_DEV;
+	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.dst_addr = res->start + SUN4I_TXDATA_REG;
+	dma_sconfig.src_maxburst = 1;
+	dma_sconfig.dst_maxburst = 1;
+
+	ret = dmaengine_slave_config(sspi->tx_dma_chan, &dma_sconfig);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to configure TX DMA slave\n");
+		goto err_tx_dma_release;
+	}
+
+	sspi->rx_dma_chan = dma_request_slave_channel_reason(&pdev->dev, "rx");
+	if (IS_ERR(sspi->rx_dma_chan)) {
+		dev_err(&pdev->dev, "Unable to acquire DMA channel RX\n");
+		ret = PTR_ERR(sspi->rx_dma_chan);
+		goto err_tx_dma_release;
+	}
+
+	dma_sconfig.direction = DMA_DEV_TO_MEM;
+	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+	dma_sconfig.src_addr = res->start + SUN4I_RXDATA_REG;
+	dma_sconfig.src_maxburst = 1;
+	dma_sconfig.dst_maxburst = 1;
+
+	ret = dmaengine_slave_config(sspi->rx_dma_chan, &dma_sconfig);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to configure RX DMA slave\n");
+		goto err_rx_dma_release;
+	}
 
 	/*
 	 * This wake-up/shutdown pattern is to be able to have the
@@ -418,7 +538,7 @@  static int sun4i_spi_probe(struct platform_device *pdev)
 	ret = sun4i_spi_runtime_resume(&pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't resume the device\n");
-		goto err_free_master;
+		goto err_rx_dma_release;
 	}
 
 	pm_runtime_set_active(&pdev->dev);
@@ -436,6 +556,10 @@  static int sun4i_spi_probe(struct platform_device *pdev)
 err_pm_disable:
 	pm_runtime_disable(&pdev->dev);
 	sun4i_spi_runtime_suspend(&pdev->dev);
+err_rx_dma_release:
+	dma_release_channel(sspi->rx_dma_chan);
+err_tx_dma_release:
+	dma_release_channel(sspi->tx_dma_chan);
 err_free_master:
 	spi_master_put(master);
 	return ret;
@@ -443,8 +567,17 @@  err_free_master:
 
 static int sun4i_spi_remove(struct platform_device *pdev)
 {
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct sun4i_spi *sspi = spi_master_get_devdata(master);
+
+	if (pm_runtime_active(&pdev->dev))
+		sun4i_spi_runtime_suspend(&pdev->dev);
+
 	pm_runtime_disable(&pdev->dev);
 
+	dma_release_channel(sspi->rx_dma_chan);
+	dma_release_channel(sspi->tx_dma_chan);
+
 	return 0;
 }