@@ -86,7 +86,7 @@
#reset-cells = <1>;
};
- pinctrl@20008000 {
+ pinctrl: pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
@@ -82,7 +82,7 @@
#reset-cells = <1>;
};
- pinctrl@20008000 {
+ pinctrl: pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmu>;
@@ -57,14 +57,14 @@
cache-level = <2>;
};
- global-timer@1013c200 {
+ global_timer: global-timer@1013c200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1013c200 0x20>;
interrupts = <GIC_PPI 11 0x304>;
clocks = <&cru CORE_PERI>;
};
- local-timer@1013c600 {
+ local_timer: local-timer@1013c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1013c600 0x20>;
interrupts = <GIC_PPI 13 0x304>;
@@ -111,7 +111,7 @@
status = "disabled";
};
- dwmmc@10214000 {
+ mmc0: dwmmc@10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -124,7 +124,7 @@
status = "disabled";
};
- dwmmc@10218000 {
+ mmc1: dwmmc@10218000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
Some nodes that are changed in the dtsi hierarchy do not have handles yet. As it was suggested in the rk3288 submission to do subsequent nodes changes through such handle-references, add the missing ones. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm/boot/dts/rk3066a.dtsi | 2 +- arch/arm/boot/dts/rk3188.dtsi | 2 +- arch/arm/boot/dts/rk3xxx.dtsi | 8 ++++---- 3 files changed, 6 insertions(+), 6 deletions(-)