| Message ID | 1406519386-4902-7-git-send-email-emilio@elopez.com.ar (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Jul 28, 2014 at 12:49:44AM -0300, Emilio López wrote: > This commit adds the PLL2 definition to the sun4i, sun5i and sun7i > device trees. PLL2 is used to clock audio devices. > > Not-signed-off-by: Emilio López <emilio@elopez.com.ar> > --- > > Note that there is no handling of A10 rev A here, this should not go > in as-is. > > arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++ > arch/arm/boot/dts/sun5i-a10s.dtsi | 8 ++++++++ > arch/arm/boot/dts/sun5i-a13.dtsi | 8 ++++++++ > arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ > 4 files changed, 32 insertions(+) > > diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi > index faf41e3..7671e56 100644 > --- a/arch/arm/boot/dts/sun4i-a10.dtsi > +++ b/arch/arm/boot/dts/sun4i-a10.dtsi > @@ -81,6 +81,14 @@ > clock-output-names = "pll1"; > }; > > + pll2: clk@01c20008 { > + #clock-cells = <1>; > + compatible = "allwinner,sun4i-a10-b-pll2-clk"; > + reg = <0x01c20008 0x4>; > + clocks = <&osc24M>; > + clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; Why don't you just declare the fixed factors as fixed factors? It would simplify greatly your driver, and be more accurate.
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index faf41e3..7671e56 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -81,6 +81,14 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-b-pll2-clk"; + reg = <0x01c20008 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 92b5d1c..75e9632 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -74,6 +74,14 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-b-pll2-clk"; + reg = <0x01c20008 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index d8f02ee..61c8331 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -75,6 +75,14 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-b-pll2-clk"; + reg = <0x01c20008 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index b1f3776..766ad81 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -91,6 +91,14 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-b-pll2-clk"; + reg = <0x01c20008 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll2", "pll2x2", "pll2x4", "pll2x8"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk";