diff mbox

[v5,02/10] ARM: dts: Fold exynos5250-cros-common into exynos5250-snow

Message ID 1406868897-26874-3-git-send-email-afaerber@suse.de (mailing list archive)
State New, archived
Headers show

Commit Message

Andreas Färber Aug. 1, 2014, 4:54 a.m. UTC
exynos5250-cros-common.dtsi was meant for sharing common pieces across
ChromeOS devices. This turned out premature, as several devices ended up
in the common file that are not common after all. Since the remaining
common ChromeOS pieces are fairly minor,  exynos5250-cros-common.dtsi
was requested to be merged into the Snow device tree, sharing only the
keyboard controller for now. This may be re-evaluated as both mature.

Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 v4 -> v5:
 * Extended commit message (Tomasz Figa)

 v3 -> v4: Unchanged
 
 v2 -> v3:
 * Renamed subject to match Kukjin's style
 * Rebased onto MMC pinctrl bug fix (Doug Anderson)
 
 v2: New (Doug Anderson)

 arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
 arch/arm/boot/dts/exynos5250-snow.dts         | 164 +++++++++++++++++++++++---
 2 files changed, 145 insertions(+), 183 deletions(-)
 delete mode 100644 arch/arm/boot/dts/exynos5250-cros-common.dtsi

Comments

Doug Anderson Aug. 1, 2014, 4:45 p.m. UTC | #1
Andreas,

On Thu, Jul 31, 2014 at 9:54 PM, Andreas Färber <afaerber@suse.de> wrote:
> exynos5250-cros-common.dtsi was meant for sharing common pieces across
> ChromeOS devices. This turned out premature, as several devices ended up
> in the common file that are not common after all. Since the remaining
> common ChromeOS pieces are fairly minor,  exynos5250-cros-common.dtsi
> was requested to be merged into the Snow device tree, sharing only the
> keyboard controller for now. This may be re-evaluated as both mature.
>
> Suggested-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Tomasz Figa <t.figa@samsung.com>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
>  v4 -> v5:
>  * Extended commit message (Tomasz Figa)
>
>  v3 -> v4: Unchanged
>
>  v2 -> v3:
>  * Renamed subject to match Kukjin's style
>  * Rebased onto MMC pinctrl bug fix (Doug Anderson)
>
>  v2: New (Doug Anderson)
>
>  arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
>  arch/arm/boot/dts/exynos5250-snow.dts         | 164 +++++++++++++++++++++++---
>  2 files changed, 145 insertions(+), 183 deletions(-)

Reviewed-by: Doug Anderson <dianders@chromium.org>

I'd suggest that this land sooner rather than later to avoid future conflicts.
Kim Kukjin Aug. 18, 2014, 8:03 p.m. UTC | #2
On 08/01/14 11:45, Doug Anderson wrote:
> Andreas,
>
> On Thu, Jul 31, 2014 at 9:54 PM, Andreas Färber<afaerber@suse.de>  wrote:
>> exynos5250-cros-common.dtsi was meant for sharing common pieces across
>> ChromeOS devices. This turned out premature, as several devices ended up
>> in the common file that are not common after all. Since the remaining
>> common ChromeOS pieces are fairly minor,  exynos5250-cros-common.dtsi
>> was requested to be merged into the Snow device tree, sharing only the
>> keyboard controller for now. This may be re-evaluated as both mature.
>>
>> Suggested-by: Doug Anderson<dianders@chromium.org>
>> Reviewed-by: Tomasz Figa<t.figa@samsung.com>
>> Signed-off-by: Andreas Färber<afaerber@suse.de>
>> ---
>>   v4 ->  v5:
>>   * Extended commit message (Tomasz Figa)
>>
>>   v3 ->  v4: Unchanged
>>
>>   v2 ->  v3:
>>   * Renamed subject to match Kukjin's style
>>   * Rebased onto MMC pinctrl bug fix (Doug Anderson)
>>
>>   v2: New (Doug Anderson)
>>
>>   arch/arm/boot/dts/exynos5250-cros-common.dtsi | 164 --------------------------
>>   arch/arm/boot/dts/exynos5250-snow.dts         | 164 +++++++++++++++++++++++---
>>   2 files changed, 145 insertions(+), 183 deletions(-)
>
> Reviewed-by: Doug Anderson<dianders@chromium.org>
>
> I'd suggest that this land sooner rather than later to avoid future conflicts.

Applied, thanks.

- Kukjin
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
deleted file mode 100644
index e603e9c70142..000000000000
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ /dev/null
@@ -1,164 +0,0 @@ 
-/*
- * Common device tree include for all Exynos 5250 boards based off of Daisy.
- *
- * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	aliases {
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-	};
-
-	pinctrl@11400000 {
-		/*
-		 * Disabled pullups since external part has its own pullups and
-		 * double-pulling gets us out of spec in some cases.
-		 */
-		i2c2_bus: i2c2-bus {
-			samsung,pin-pud = <0>;
-		};
-	};
-
-	i2c@12C60000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C70000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-	};
-
-	i2c@12C80000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	i2c@12C90000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CA0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CB0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CD0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-	};
-
-	i2c@12CE0000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <378000>;
-
-		hdmiphy: hdmiphy@38 {
-			compatible = "samsung,exynos4212-hdmiphy";
-			reg = <0x38>;
-		};
-	};
-
-	mmc@12200000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <8>;
-		};
-	};
-
-	mmc@12220000 {
-		num-slots = <1>;
-		supports-highspeed;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-			wp-gpios = <&gpc2 1 0>;
-		};
-	};
-
-	mmc@12230000 {
-		num-slots = <1>;
-		supports-highspeed;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		/* See board-specific dts files for pin setup */
-
-		slot@0 {
-			reg = <0>;
-			bus-width = <4>;
-		};
-	};
-
-	spi_1: spi@12d30000 {
-		status = "okay";
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-	};
-
-	hdmi {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-		phy = <&hdmiphy>;
-		ddc = <&i2c_2>;
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 1>;
-			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index eb437f6afec1..1c36cd72905f 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -10,7 +10,6 @@ 
 
 /dts-v1/;
 #include "exynos5250.dtsi"
-#include "exynos5250-cros-common.dtsi"
 
 / {
 	model = "Google Snow";
@@ -20,6 +19,13 @@ 
 		i2c104 = &i2c_104;
 	};
 
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+	};
+
 	rtc@101E0000 {
 		status = "okay";
 	};
@@ -93,6 +99,13 @@ 
 	gpio-keys {
 		compatible = "gpio-keys";
 
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 1>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
 		lid-switch {
 			label = "Lid";
 			gpios = <&gpx3 5 1>;
@@ -226,24 +239,6 @@ 
 		};
 	};
 
-	mmc@12200000 {
-		status = "okay";
-	};
-
-	mmc@12220000 {
-		status = "okay";
-	};
-
-	/*
-	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
-	 * reduce EMI.
-	 */
-	mmc@12230000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
-	};
-
 	i2c@12CD0000 {
 		max98095: codec@11 {
 			compatible = "maxim,max98095";
@@ -292,6 +287,11 @@ 
 	};
 
 	hdmi {
+		hpd-gpio = <&gpx3 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_hpd_irq>;
+		phy = <&hdmiphy>;
+		ddc = <&i2c_2>;
 		hdmi-en-supply = <&tps65090_fet7>;
 		vdd-supply = <&ldo8_reg>;
 		vdd_osc-supply = <&ldo10_reg>;
@@ -343,6 +343,10 @@ 
 };
 
 &i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
 	max77686@09 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
@@ -489,6 +493,10 @@ 
 };
 
 &i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
 	trackpad {
 		reg = <0x67>;
 		compatible = "cypress,cyapa";
@@ -498,6 +506,118 @@ 
 	};
 };
 
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	hdmiphy: hdmiphy@38 {
+		compatible = "samsung,exynos4212-hdmiphy";
+		reg = <0x38>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		wp-gpios = <&gpc2 1 0>;
+	};
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_3 {
+	status = "okay";
+	num-slots = <1>;
+	supports-highspeed;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
 &pinctrl_0 {
 	max77686_irq: max77686-irq {
 		samsung,pins = "gpx3-2";
@@ -507,4 +627,10 @@ 
 	};
 };
 
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+};
+
 #include "cros-ec-keyboard.dtsi"