diff mbox

[v3] watchdog: Add DA906x PMIC watchdog driver.

Message ID 1407926776-16700-1-git-send-email-mpa@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Markus Pargmann Aug. 13, 2014, 10:46 a.m. UTC
From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>

This driver supports the watchdog device inside the DA906x PMIC.

Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 drivers/watchdog/Kconfig      |   7 ++
 drivers/watchdog/Makefile     |   1 +
 drivers/watchdog/da9063_wdt.c | 228 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 236 insertions(+)
 create mode 100644 drivers/watchdog/da9063_wdt.c

Comments

Markus Pargmann Aug. 13, 2014, 10:50 a.m. UTC | #1
Hi,

On Wed, Aug 13, 2014 at 12:46:16PM +0200, Markus Pargmann wrote:
> From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> 
> This driver supports the watchdog device inside the DA906x PMIC.
> 
> Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
>  drivers/watchdog/Kconfig      |   7 ++
>  drivers/watchdog/Makefile     |   1 +
>  drivers/watchdog/da9063_wdt.c | 228 ++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 236 insertions(+)
>  create mode 100644 drivers/watchdog/da9063_wdt.c

Forgot to add --notes to send-email.

Here are the changes in v3:
     - Cleanup error handling for timeout selection and setting
     - Fix race condition due to late wdt drvdata setup
     - Remove static struct watchdog_device. It is not initialized in the probe
       function
     - Use WATCHDOG_NOWAYOUT_INIT_STATUS for the status
     - Remove 0 shift using DA9063_TWDSCALE_SHIFT

Best regards,

Markus Pargmann
Guenter Roeck Aug. 14, 2014, 5:26 a.m. UTC | #2
On 08/13/2014 03:46 AM, Markus Pargmann wrote:
> From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
>
> This driver supports the watchdog device inside the DA906x PMIC.
>
> Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>

Couple of additional comments.

Guenter

> ---
>   drivers/watchdog/Kconfig      |   7 ++
>   drivers/watchdog/Makefile     |   1 +
>   drivers/watchdog/da9063_wdt.c | 228 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 236 insertions(+)
>   create mode 100644 drivers/watchdog/da9063_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index c845527b503a..8d5c9b33552a 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -87,6 +87,13 @@ config DA9055_WATCHDOG
>   	  This driver can also be built as a module.  If so, the module
>   	  will be called da9055_wdt.
>
> +config DA9063_WATCHDOG
> +	tristate "Dialog DA9063 Watchdog"
> +	depends on MFD_DA9063
> +	select WATCHDOG_CORE
> +	help
> +	  Support for the watchdog in the DA9063 PMIC.
> +
>   config GPIO_WATCHDOG
>   	tristate "Watchdog device controlled through GPIO-line"
>   	depends on OF_GPIO
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 7b8a91ed20e7..ce4a7632d863 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -172,6 +172,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>   # Architecture Independent
>   obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
>   obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> +obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
>   obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
>   obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
>   obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> new file mode 100644
> index 000000000000..2b5ce564c4c1
> --- /dev/null
> +++ b/drivers/watchdog/da9063_wdt.c
> @@ -0,0 +1,228 @@
> +/*
> + * Watchdog driver for DA9063 PMICs.
> + *
> + * Copyright(c) 2012 Dialog Semiconductor Ltd.
> + *
> + * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/uaccess.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/da9063/registers.h>
> +#include <linux/mfd/da9063/core.h>
> +#include <linux/regmap.h>
> +
> +/*
> + * Watchdog selector to timeout in seconds.
> + *   0: WDT disabled;
> + *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
> + */
> +static const int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
> +#define DA9063_TWDSCALE_DISABLE		0
> +#define DA9063_TWDSCALE_MIN		1
> +#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
> +#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
> +#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
> +#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
> +
> +struct da9063_watchdog {
> +	struct da9063 *da9063;
> +	struct watchdog_device wdtdev;
> +	struct mutex lock;
> +};
> +
> +static int da9063_wdt_timeout_to_sel(int secs)
> +{
> +	int i;
> +
> +	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
> +		if (wdt_timeout[i] >= secs)
> +			return i;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int da9063_wdt_disable(struct da9063 *da9063)
> +{
> +	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> +			DA9063_TWDSCALE_MASK,
> +			DA9063_TWDSCALE_DISABLE);
> +}
> +
> +static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
> +{
> +	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> +			DA9063_TWDSCALE_MASK, regval);
> +}
> +
> +static int _da9063_wdt_kick(struct da9063 *da9063)
> +{
> +	return regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
> +			DA9063_WATCHDOG);
> +}
> +
> +static int da9063_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret = 0;

Unnecessary initialization.

> +
> +	mutex_lock(&wdt->lock);
> +	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
> +	if (selector < 0) {
> +		dev_err(wdt->da9063->dev, "Timeout out of range (timeout=%d)\n",
> +				wdt->wdtdev.timeout);
> +		return selector;

That only works if you move the lock further down, which should be ok.
Otherwise you'll need to assign the return code to ret and jump to
the unlock below.

> +	}
> +
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret) {
> +		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
> +				ret);
> +	}
> +	mutex_unlock(&wdt->lock);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret = 0;

Unnecessary initialization.

> +
> +	mutex_lock(&wdt->lock);
> +	ret = da9063_wdt_disable(wdt->da9063);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev,
> +			  "Watchdog failed to stop (err = %d)\n", ret);
> +	mutex_unlock(&wdt->lock);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_ping(struct watchdog_device *wdd)
> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	int ret = 0;
> +
Unnecessary initialization.

> +	mutex_lock(&wdt->lock);
> +	ret = _da9063_wdt_kick(wdt->da9063);
> +	if (ret)
> +		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
> +				ret);
> +	mutex_unlock(&wdt->lock);
> +
> +	return ret;
> +}
> +
> +static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> +							unsigned int timeout)

Sometimes it seems to me people go through great pains not to follow Linux
indentation rules, and use the "as many different indentations as possible"
rule instead ;-). No, I am not enforcing it; that would be up to Wim if he cares.

> +{
> +	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> +	unsigned int selector;
> +	int ret;
> +
> +	selector = da9063_wdt_timeout_to_sel(timeout);
> +	if (selector < 0) {
> +		dev_err(wdt->da9063->dev, "Unsupported watchdog timeout, should be between 2 and 131\n");
> +		return -EINVAL;
> +	}
> +
> +	mutex_lock(&wdt->lock);
> +
> +	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> +	if (ret)
> +		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
> +				ret);
> +	else
> +		wdd->timeout = wdt_timeout[selector];
> +
> +	mutex_unlock(&wdt->lock);
> +
> +	return ret;
> +}
> +
> +static const struct watchdog_info da9063_watchdog_info = {
> +	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> +	.identity = "DA9063 Watchdog",
> +};
> +
> +static const struct watchdog_ops da9063_watchdog_ops = {
> +	.owner = THIS_MODULE,
> +	.start = da9063_wdt_start,
> +	.stop = da9063_wdt_stop,
> +	.ping = da9063_wdt_ping,
> +	.set_timeout = da9063_wdt_set_timeout,
> +};
> +
> +static int da9063_wdt_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
> +	struct da9063_watchdog *wdt;
> +
> +	if (!da9063)
> +		return -EPROBE_DEFER;

Can this ever happen ? Isn't this driver instantiated from its parent,
which would ensure that the parent's driver data is set ?

> +
> +	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->da9063 = da9063;
> +	mutex_init(&wdt->lock);
> +
> +	wdt->wdtdev.info = &da9063_watchdog_info;
> +	wdt->wdtdev.ops = &da9063_watchdog_ops;
> +	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
> +	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
> +	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
> +
> +	if (IS_ENABLED(CONFIG_WATCHDOG_NOWAYOUT))
> +		wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;

You don't need the if() here. That is embedded in WATCHDOG_NOWAYOUT_INIT_STATUS.

> +
> +	watchdog_set_drvdata(&wdt->wdtdev, wdt);
> +	dev_set_drvdata(&pdev->dev, wdt);
> +
> +	ret = watchdog_register_device(&wdt->wdtdev);
> +	if (ret) {
> +		dev_err(da9063->dev, "da9063-watchdog registration failed (err = %d)",
> +				ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int da9063_wdt_remove(struct platform_device *pdev)
> +{
> +	struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
> +
> +	watchdog_unregister_device(&wdt->wdtdev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver da9063_wdt_driver = {
> +	.probe = da9063_wdt_probe,
> +	.remove = da9063_wdt_remove,
> +	.driver = {
> +		.name = DA9063_DRVNAME_WATCHDOG,
> +	},
> +};
> +module_platform_driver(da9063_wdt_driver);
> +
> +MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
> +MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);
>
Markus Pargmann Aug. 14, 2014, 9:57 a.m. UTC | #3
On Wed, Aug 13, 2014 at 10:26:22PM -0700, Guenter Roeck wrote:
> On 08/13/2014 03:46 AM, Markus Pargmann wrote:
> >From: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> >
> >This driver supports the watchdog device inside the DA906x PMIC.
> >
> >Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
> >Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> >Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> 
> Couple of additional comments.
> 
> Guenter
> 
> >---
> >  drivers/watchdog/Kconfig      |   7 ++
> >  drivers/watchdog/Makefile     |   1 +
> >  drivers/watchdog/da9063_wdt.c | 228 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 236 insertions(+)
> >  create mode 100644 drivers/watchdog/da9063_wdt.c
> >
> >diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> >index c845527b503a..8d5c9b33552a 100644
> >--- a/drivers/watchdog/Kconfig
> >+++ b/drivers/watchdog/Kconfig
> >@@ -87,6 +87,13 @@ config DA9055_WATCHDOG
> >  	  This driver can also be built as a module.  If so, the module
> >  	  will be called da9055_wdt.
> >
> >+config DA9063_WATCHDOG
> >+	tristate "Dialog DA9063 Watchdog"
> >+	depends on MFD_DA9063
> >+	select WATCHDOG_CORE
> >+	help
> >+	  Support for the watchdog in the DA9063 PMIC.
> >+
> >  config GPIO_WATCHDOG
> >  	tristate "Watchdog device controlled through GPIO-line"
> >  	depends on OF_GPIO
> >diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> >index 7b8a91ed20e7..ce4a7632d863 100644
> >--- a/drivers/watchdog/Makefile
> >+++ b/drivers/watchdog/Makefile
> >@@ -172,6 +172,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
> >  # Architecture Independent
> >  obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
> >  obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
> >+obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
> >  obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
> >  obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> >  obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> >diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
> >new file mode 100644
> >index 000000000000..2b5ce564c4c1
> >--- /dev/null
> >+++ b/drivers/watchdog/da9063_wdt.c
> >@@ -0,0 +1,228 @@
> >+/*
> >+ * Watchdog driver for DA9063 PMICs.
> >+ *
> >+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
> >+ *
> >+ * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
> >+ *
> >+ * This program is free software; you can redistribute  it and/or modify it
> >+ * under  the terms of  the GNU General  Public License as published by the
> >+ * Free Software Foundation;  either version 2 of the  License, or (at your
> >+ * option) any later version.
> >+ */
> >+
> >+#include <linux/kernel.h>
> >+#include <linux/module.h>
> >+#include <linux/watchdog.h>
> >+#include <linux/platform_device.h>
> >+#include <linux/uaccess.h>
> >+#include <linux/slab.h>
> >+#include <linux/delay.h>
> >+#include <linux/mfd/da9063/registers.h>
> >+#include <linux/mfd/da9063/core.h>
> >+#include <linux/regmap.h>
> >+
> >+/*
> >+ * Watchdog selector to timeout in seconds.
> >+ *   0: WDT disabled;
> >+ *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
> >+ */
> >+static const int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
> >+#define DA9063_TWDSCALE_DISABLE		0
> >+#define DA9063_TWDSCALE_MIN		1
> >+#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
> >+#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
> >+#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
> >+#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
> >+
> >+struct da9063_watchdog {
> >+	struct da9063 *da9063;
> >+	struct watchdog_device wdtdev;
> >+	struct mutex lock;
> >+};
> >+
> >+static int da9063_wdt_timeout_to_sel(int secs)
> >+{
> >+	int i;
> >+
> >+	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
> >+		if (wdt_timeout[i] >= secs)
> >+			return i;
> >+	}
> >+
> >+	return -EINVAL;
> >+}
> >+
> >+static int da9063_wdt_disable(struct da9063 *da9063)
> >+{
> >+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> >+			DA9063_TWDSCALE_MASK,
> >+			DA9063_TWDSCALE_DISABLE);
> >+}
> >+
> >+static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
> >+{
> >+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
> >+			DA9063_TWDSCALE_MASK, regval);
> >+}
> >+
> >+static int _da9063_wdt_kick(struct da9063 *da9063)
> >+{
> >+	return regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
> >+			DA9063_WATCHDOG);
> >+}
> >+
> >+static int da9063_wdt_start(struct watchdog_device *wdd)
> >+{
> >+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> >+	unsigned int selector;
> >+	int ret = 0;
> 
> Unnecessary initialization.

Thanks, I fixed all these initializations.
> 
> >+
> >+	mutex_lock(&wdt->lock);
> >+	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
> >+	if (selector < 0) {
> >+		dev_err(wdt->da9063->dev, "Timeout out of range (timeout=%d)\n",
> >+				wdt->wdtdev.timeout);
> >+		return selector;
> 
> That only works if you move the lock further down, which should be ok.
> Otherwise you'll need to assign the return code to ret and jump to
> the unlock below.

Yes, moved.

> 
> >+	}
> >+
> >+	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> >+	if (ret) {
> >+		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
> >+				ret);
> >+	}
> >+	mutex_unlock(&wdt->lock);
> >+
> >+	return ret;
> >+}
> >+
> >+static int da9063_wdt_stop(struct watchdog_device *wdd)
> >+{
> >+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> >+	int ret = 0;
> 
> Unnecessary initialization.
> 
> >+
> >+	mutex_lock(&wdt->lock);
> >+	ret = da9063_wdt_disable(wdt->da9063);
> >+	if (ret)
> >+		dev_alert(wdt->da9063->dev,
> >+			  "Watchdog failed to stop (err = %d)\n", ret);
> >+	mutex_unlock(&wdt->lock);
> >+
> >+	return ret;
> >+}
> >+
> >+static int da9063_wdt_ping(struct watchdog_device *wdd)
> >+{
> >+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> >+	int ret = 0;
> >+
> Unnecessary initialization.
> 
> >+	mutex_lock(&wdt->lock);
> >+	ret = _da9063_wdt_kick(wdt->da9063);
> >+	if (ret)
> >+		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
> >+				ret);
> >+	mutex_unlock(&wdt->lock);
> >+
> >+	return ret;
> >+}
> >+
> >+static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
> >+							unsigned int timeout)
> 
> Sometimes it seems to me people go through great pains not to follow Linux
> indentation rules, and use the "as many different indentations as possible"
> rule instead ;-). No, I am not enforcing it; that would be up to Wim if he cares.

I fixed this indentation to the same style as the rest of the driver.

> 
> >+{
> >+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
> >+	unsigned int selector;
> >+	int ret;
> >+
> >+	selector = da9063_wdt_timeout_to_sel(timeout);
> >+	if (selector < 0) {
> >+		dev_err(wdt->da9063->dev, "Unsupported watchdog timeout, should be between 2 and 131\n");
> >+		return -EINVAL;
> >+	}
> >+
> >+	mutex_lock(&wdt->lock);
> >+
> >+	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
> >+	if (ret)
> >+		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
> >+				ret);
> >+	else
> >+		wdd->timeout = wdt_timeout[selector];
> >+
> >+	mutex_unlock(&wdt->lock);
> >+
> >+	return ret;
> >+}
> >+
> >+static const struct watchdog_info da9063_watchdog_info = {
> >+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> >+	.identity = "DA9063 Watchdog",
> >+};
> >+
> >+static const struct watchdog_ops da9063_watchdog_ops = {
> >+	.owner = THIS_MODULE,
> >+	.start = da9063_wdt_start,
> >+	.stop = da9063_wdt_stop,
> >+	.ping = da9063_wdt_ping,
> >+	.set_timeout = da9063_wdt_set_timeout,
> >+};
> >+
> >+static int da9063_wdt_probe(struct platform_device *pdev)
> >+{
> >+	int ret;
> >+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
> >+	struct da9063_watchdog *wdt;
> >+
> >+	if (!da9063)
> >+		return -EPROBE_DEFER;
> 
> Can this ever happen ? Isn't this driver instantiated from its parent,
> which would ensure that the parent's driver data is set ?

No this can't happen. I replaced it with BUG_ON and also introduced a
BUG_ON check for dev.parent.

> 
> >+
> >+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> >+	if (!wdt)
> >+		return -ENOMEM;
> >+
> >+	wdt->da9063 = da9063;
> >+	mutex_init(&wdt->lock);
> >+
> >+	wdt->wdtdev.info = &da9063_watchdog_info;
> >+	wdt->wdtdev.ops = &da9063_watchdog_ops;
> >+	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
> >+	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
> >+	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
> >+
> >+	if (IS_ENABLED(CONFIG_WATCHDOG_NOWAYOUT))
> >+		wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
> 
> You don't need the if() here. That is embedded in WATCHDOG_NOWAYOUT_INIT_STATUS.

Removed.

Thanks,

Markus
Guenter Roeck Aug. 14, 2014, 3:40 p.m. UTC | #4
On 08/14/2014 02:57 AM, Markus Pargmann wrote:

>>> +
>>> +static int da9063_wdt_probe(struct platform_device *pdev)
>>> +{
>>> +	int ret;
>>> +	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
>>> +	struct da9063_watchdog *wdt;
>>> +
>>> +	if (!da9063)
>>> +		return -EPROBE_DEFER;
>>
>> Can this ever happen ? Isn't this driver instantiated from its parent,
>> which would ensure that the parent's driver data is set ?
>
> No this can't happen. I replaced it with BUG_ON and also introduced a
> BUG_ON check for dev.parent.
>
That is a bit too much. You should only use BUG_ON if the kernel can not
continue to run, which should not be the case here. I would suggest
to return -ENODEV.

Guenter
Markus Pargmann Aug. 15, 2014, 8:51 a.m. UTC | #5
On Thu, Aug 14, 2014 at 08:40:10AM -0700, Guenter Roeck wrote:
> On 08/14/2014 02:57 AM, Markus Pargmann wrote:
> 
> >>>+
> >>>+static int da9063_wdt_probe(struct platform_device *pdev)
> >>>+{
> >>>+	int ret;
> >>>+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
> >>>+	struct da9063_watchdog *wdt;
> >>>+
> >>>+	if (!da9063)
> >>>+		return -EPROBE_DEFER;
> >>
> >>Can this ever happen ? Isn't this driver instantiated from its parent,
> >>which would ensure that the parent's driver data is set ?
> >
> >No this can't happen. I replaced it with BUG_ON and also introduced a
> >BUG_ON check for dev.parent.
> >
> That is a bit too much. You should only use BUG_ON if the kernel can not
> continue to run, which should not be the case here. I would suggest
> to return -ENODEV.

Okay, thanks.

Markus
diff mbox

Patch

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index c845527b503a..8d5c9b33552a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -87,6 +87,13 @@  config DA9055_WATCHDOG
 	  This driver can also be built as a module.  If so, the module
 	  will be called da9055_wdt.
 
+config DA9063_WATCHDOG
+	tristate "Dialog DA9063 Watchdog"
+	depends on MFD_DA9063
+	select WATCHDOG_CORE
+	help
+	  Support for the watchdog in the DA9063 PMIC.
+
 config GPIO_WATCHDOG
 	tristate "Watchdog device controlled through GPIO-line"
 	depends on OF_GPIO
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 7b8a91ed20e7..ce4a7632d863 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -172,6 +172,7 @@  obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 # Architecture Independent
 obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
 obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
+obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
 obj-$(CONFIG_GPIO_WATCHDOG)	+= gpio_wdt.o
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
diff --git a/drivers/watchdog/da9063_wdt.c b/drivers/watchdog/da9063_wdt.c
new file mode 100644
index 000000000000..2b5ce564c4c1
--- /dev/null
+++ b/drivers/watchdog/da9063_wdt.c
@@ -0,0 +1,228 @@ 
+/*
+ * Watchdog driver for DA9063 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mfd/da9063/registers.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/regmap.h>
+
+/*
+ * Watchdog selector to timeout in seconds.
+ *   0: WDT disabled;
+ *   others: timeout = 2048 ms * 2^(TWDSCALE-1).
+ */
+static const int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+#define DA9063_TWDSCALE_DISABLE		0
+#define DA9063_TWDSCALE_MIN		1
+#define DA9063_TWDSCALE_MAX		(ARRAY_SIZE(wdt_timeout) - 1)
+#define DA9063_WDT_MIN_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MIN]
+#define DA9063_WDT_MAX_TIMEOUT		wdt_timeout[DA9063_TWDSCALE_MAX]
+#define DA9063_WDG_TIMEOUT		wdt_timeout[3]
+
+struct da9063_watchdog {
+	struct da9063 *da9063;
+	struct watchdog_device wdtdev;
+	struct mutex lock;
+};
+
+static int da9063_wdt_timeout_to_sel(int secs)
+{
+	int i;
+
+	for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
+		if (wdt_timeout[i] >= secs)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int da9063_wdt_disable(struct da9063 *da9063)
+{
+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
+			DA9063_TWDSCALE_MASK,
+			DA9063_TWDSCALE_DISABLE);
+}
+
+static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
+{
+	return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
+			DA9063_TWDSCALE_MASK, regval);
+}
+
+static int _da9063_wdt_kick(struct da9063 *da9063)
+{
+	return regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
+			DA9063_WATCHDOG);
+}
+
+static int da9063_wdt_start(struct watchdog_device *wdd)
+{
+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	unsigned int selector;
+	int ret = 0;
+
+	mutex_lock(&wdt->lock);
+	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
+	if (selector < 0) {
+		dev_err(wdt->da9063->dev, "Timeout out of range (timeout=%d)\n",
+				wdt->wdtdev.timeout);
+		return selector;
+	}
+
+	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+	if (ret) {
+		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
+				ret);
+	}
+	mutex_unlock(&wdt->lock);
+
+	return ret;
+}
+
+static int da9063_wdt_stop(struct watchdog_device *wdd)
+{
+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	int ret = 0;
+
+	mutex_lock(&wdt->lock);
+	ret = da9063_wdt_disable(wdt->da9063);
+	if (ret)
+		dev_alert(wdt->da9063->dev,
+			  "Watchdog failed to stop (err = %d)\n", ret);
+	mutex_unlock(&wdt->lock);
+
+	return ret;
+}
+
+static int da9063_wdt_ping(struct watchdog_device *wdd)
+{
+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	int ret = 0;
+
+	mutex_lock(&wdt->lock);
+	ret = _da9063_wdt_kick(wdt->da9063);
+	if (ret)
+		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
+				ret);
+	mutex_unlock(&wdt->lock);
+
+	return ret;
+}
+
+static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
+							unsigned int timeout)
+{
+	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	unsigned int selector;
+	int ret;
+
+	selector = da9063_wdt_timeout_to_sel(timeout);
+	if (selector < 0) {
+		dev_err(wdt->da9063->dev, "Unsupported watchdog timeout, should be between 2 and 131\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&wdt->lock);
+
+	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+	if (ret)
+		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
+				ret);
+	else
+		wdd->timeout = wdt_timeout[selector];
+
+	mutex_unlock(&wdt->lock);
+
+	return ret;
+}
+
+static const struct watchdog_info da9063_watchdog_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+	.identity = "DA9063 Watchdog",
+};
+
+static const struct watchdog_ops da9063_watchdog_ops = {
+	.owner = THIS_MODULE,
+	.start = da9063_wdt_start,
+	.stop = da9063_wdt_stop,
+	.ping = da9063_wdt_ping,
+	.set_timeout = da9063_wdt_set_timeout,
+};
+
+static int da9063_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
+	struct da9063_watchdog *wdt;
+
+	if (!da9063)
+		return -EPROBE_DEFER;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->da9063 = da9063;
+	mutex_init(&wdt->lock);
+
+	wdt->wdtdev.info = &da9063_watchdog_info;
+	wdt->wdtdev.ops = &da9063_watchdog_ops;
+	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
+	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
+	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
+
+	if (IS_ENABLED(CONFIG_WATCHDOG_NOWAYOUT))
+		wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+
+	watchdog_set_drvdata(&wdt->wdtdev, wdt);
+	dev_set_drvdata(&pdev->dev, wdt);
+
+	ret = watchdog_register_device(&wdt->wdtdev);
+	if (ret) {
+		dev_err(da9063->dev, "da9063-watchdog registration failed (err = %d)",
+				ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int da9063_wdt_remove(struct platform_device *pdev)
+{
+	struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
+
+	watchdog_unregister_device(&wdt->wdtdev);
+
+	return 0;
+}
+
+static struct platform_driver da9063_wdt_driver = {
+	.probe = da9063_wdt_probe,
+	.remove = da9063_wdt_remove,
+	.driver = {
+		.name = DA9063_DRVNAME_WATCHDOG,
+	},
+};
+module_platform_driver(da9063_wdt_driver);
+
+MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
+MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);