diff mbox

[2/4] pwm: rockchip: Allow polarity invert on rk3288

Message ID 1408381749-14156-3-git-send-email-dianders@chromium.org (mailing list archive)
State New, archived
Headers show

Commit Message

Doug Anderson Aug. 18, 2014, 5:09 p.m. UTC
The rk3288 has the ability to invert the polarity of the PWM.  Let's
enable that ability.

To do this we increase the number of pwm_cells to 3 to allow using the
PWM_POLARITY_INVERTED flag.  Since the PWM driver on rk3288 is very
new, I thought this was OK.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
 .../devicetree/bindings/pwm/pwm-rockchip.txt       |  4 +--
 drivers/pwm/pwm-rockchip.c                         | 32 ++++++++++++++++++++--
 2 files changed, 32 insertions(+), 4 deletions(-)

Comments

Thierry Reding Aug. 19, 2014, 7:18 a.m. UTC | #1
On Mon, Aug 18, 2014 at 10:09:07AM -0700, Doug Anderson wrote:
[...]
> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
>  #define PWM_LP_DISABLE		(0 << 8)
>  
> @@ -32,6 +34,7 @@ struct rockchip_pwm_chip {
>  	struct pwm_chip chip;
>  	struct clk *clk;
>  	const struct rockchip_pwm_data *data;
> +	enum pwm_polarity polarity;

Why do you need this field? struct pwm_device already has a copy of it.

> @@ -74,10 +78,14 @@ static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
>  {
>  	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>  	u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
> -			  PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
> -			  PWM_INACTIVE_NEGATIVE;
> +			  PWM_CONTINUOUS;
>  	u32 val;
>  
> +	if (pc->polarity == PWM_POLARITY_INVERSED)
> +		enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
> +	else
> +		enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;

I have a feeling you're going to answer the above question with: "Because
it's needed here". If so, my reply would be: "Then this function should
take a struct pwm_device instead of struct pwm_chip."

> @@ -173,6 +195,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = {
>  		.ctrl = 0x0c,
>  	},
>  	.prescaler = 1,
> +	.has_invert = 1,

Since has_invert is a boolean, the proper value here would be "true".

> @@ -228,6 +252,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
>  	pc->data = id->data;
>  	pc->chip.dev = &pdev->dev;
>  	pc->chip.ops = &rockchip_pwm_ops;
> +	if (pc->data->has_invert) {
> +		pc->chip.of_xlate = of_pwm_xlate_with_flags;
> +		pc->chip.of_pwm_n_cells = 3;
> +	}
>  	pc->chip.base = -1;
>  	pc->chip.npwm = 1;

I suggest to rewrite the above as follows for readability:

 	pc->data = id->data;
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &rockchip_pwm_ops;
 	pc->chip.base = -1;
 	pc->chip.npwm = 1;
+
+	if (pc->data->has_invert) {
+		pc->chip.of_xlate = of_pwm_xlate_with_flags;
+		pc->chip.of_pwm_n_cells = 3;
+	}

Thierry
Doug Anderson Aug. 19, 2014, 4:05 p.m. UTC | #2
Thierry

On Tue, Aug 19, 2014 at 12:18 AM, Thierry Reding
<thierry.reding@gmail.com> wrote:
> On Mon, Aug 18, 2014 at 10:09:07AM -0700, Doug Anderson wrote:
> [...]
>> diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
>>  #define PWM_LP_DISABLE               (0 << 8)
>>
>> @@ -32,6 +34,7 @@ struct rockchip_pwm_chip {
>>       struct pwm_chip chip;
>>       struct clk *clk;
>>       const struct rockchip_pwm_data *data;
>> +     enum pwm_polarity polarity;
>
> Why do you need this field? struct pwm_device already has a copy of it.

OK, good point.


>> @@ -74,10 +78,14 @@ static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
>>  {
>>       struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
>>       u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
>> -                       PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
>> -                       PWM_INACTIVE_NEGATIVE;
>> +                       PWM_CONTINUOUS;
>>       u32 val;
>>
>> +     if (pc->polarity == PWM_POLARITY_INVERSED)
>> +             enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
>> +     else
>> +             enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
>
> I have a feeling you're going to answer the above question with: "Because
> it's needed here". If so, my reply would be: "Then this function should
> take a struct pwm_device instead of struct pwm_chip."

OK.  I've chosen to have it take a pwm_device AND a pwm_chip.  It is a
little redundant because a pwm_device has a pointer to its pwm_chip,
but it follows the lead of all of the callbacks in "struct pwm_ops".
If you'd like me to spin it to take only a pwm_device I'm happy to.


>
>> @@ -173,6 +195,7 @@ static const struct rockchip_pwm_data pwm_data_v2 = {
>>               .ctrl = 0x0c,
>>       },
>>       .prescaler = 1,
>> +     .has_invert = 1,
>
> Since has_invert is a boolean, the proper value here would be "true".

Done.


>> @@ -228,6 +252,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
>>       pc->data = id->data;
>>       pc->chip.dev = &pdev->dev;
>>       pc->chip.ops = &rockchip_pwm_ops;
>> +     if (pc->data->has_invert) {
>> +             pc->chip.of_xlate = of_pwm_xlate_with_flags;
>> +             pc->chip.of_pwm_n_cells = 3;
>> +     }
>>       pc->chip.base = -1;
>>       pc->chip.npwm = 1;
>
> I suggest to rewrite the above as follows for readability:
>
>         pc->data = id->data;
>         pc->chip.dev = &pdev->dev;
>         pc->chip.ops = &rockchip_pwm_ops;
>         pc->chip.base = -1;
>         pc->chip.npwm = 1;

Done.


> +       if (pc->data->has_invert) {
> +               pc->chip.of_xlate = of_pwm_xlate_with_flags;
> +               pc->chip.of_pwm_n_cells = 3;
> +       }
>
> Thierry
Thierry Reding Aug. 20, 2014, 6:09 a.m. UTC | #3
On Tue, Aug 19, 2014 at 09:05:20AM -0700, Doug Anderson wrote:
> On Tue, Aug 19, 2014 at 12:18 AM, Thierry Reding <thierry.reding@gmail.com> wrote:
> > On Mon, Aug 18, 2014 at 10:09:07AM -0700, Doug Anderson wrote:
[...]
> >> @@ -74,10 +78,14 @@ static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
> >>  {
> >>       struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
> >>       u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
> >> -                       PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
> >> -                       PWM_INACTIVE_NEGATIVE;
> >> +                       PWM_CONTINUOUS;
> >>       u32 val;
> >>
> >> +     if (pc->polarity == PWM_POLARITY_INVERSED)
> >> +             enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
> >> +     else
> >> +             enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
> >
> > I have a feeling you're going to answer the above question with: "Because
> > it's needed here". If so, my reply would be: "Then this function should
> > take a struct pwm_device instead of struct pwm_chip."
> 
> OK.  I've chosen to have it take a pwm_device AND a pwm_chip.  It is a
> little redundant because a pwm_device has a pointer to its pwm_chip,
> but it follows the lead of all of the callbacks in "struct pwm_ops".
> If you'd like me to spin it to take only a pwm_device I'm happy to.

No, that's fine.

Thierry
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
index d47d15a..b8be3d0 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt
@@ -7,8 +7,8 @@  Required properties:
    "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
  - reg: physical base address and length of the controller's registers
  - clocks: phandle and clock specifier of the PWM reference clock
- - #pwm-cells: should be 2. See pwm.txt in this directory for a
-   description of the cell format.
+ - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
+   for a description of the cell format.
 
 Example:
 
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index bdd8644..27f20d6 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -24,7 +24,9 @@ 
 #define PWM_ENABLE		(1 << 0)
 #define PWM_CONTINUOUS		(1 << 1)
 #define PWM_DUTY_POSITIVE	(1 << 3)
+#define PWM_DUTY_NEGATIVE	(0 << 3)
 #define PWM_INACTIVE_NEGATIVE	(0 << 4)
+#define PWM_INACTIVE_POSITIVE	(1 << 4)
 #define PWM_OUTPUT_LEFT		(0 << 5)
 #define PWM_LP_DISABLE		(0 << 8)
 
@@ -32,6 +34,7 @@  struct rockchip_pwm_chip {
 	struct pwm_chip chip;
 	struct clk *clk;
 	const struct rockchip_pwm_data *data;
+	enum pwm_polarity polarity;
 	void __iomem *base;
 };
 
@@ -45,6 +48,7 @@  struct rockchip_pwm_regs {
 struct rockchip_pwm_data {
 	struct rockchip_pwm_regs regs;
 	unsigned int prescaler;
+	bool has_invert;
 
 	void (*set_enable)(struct pwm_chip *chip, bool enable);
 };
@@ -74,10 +78,14 @@  static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
 {
 	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
 	u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
-			  PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
-			  PWM_INACTIVE_NEGATIVE;
+			  PWM_CONTINUOUS;
 	u32 val;
 
+	if (pc->polarity == PWM_POLARITY_INVERSED)
+		enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
+	else
+		enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
+
 	val = readl_relaxed(pc->base + pc->data->regs.ctrl);
 
 	if (enable)
@@ -124,6 +132,19 @@  static int rockchip_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	return 0;
 }
 
+int rockchip_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+			      enum pwm_polarity polarity)
+{
+	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
+
+	if (!pc->data->has_invert)
+		return -ENOSYS;
+
+	pc->polarity = polarity;
+
+	return 0;
+}
+
 static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
@@ -149,6 +170,7 @@  static void rockchip_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 static const struct pwm_ops rockchip_pwm_ops = {
 	.config = rockchip_pwm_config,
+	.set_polarity = rockchip_pwm_set_polarity,
 	.enable = rockchip_pwm_enable,
 	.disable = rockchip_pwm_disable,
 	.owner = THIS_MODULE,
@@ -173,6 +195,7 @@  static const struct rockchip_pwm_data pwm_data_v2 = {
 		.ctrl = 0x0c,
 	},
 	.prescaler = 1,
+	.has_invert = 1,
 	.set_enable = rockchip_pwm_set_enable_v2,
 };
 
@@ -184,6 +207,7 @@  static const struct rockchip_pwm_data pwm_data_vop = {
 		.ctrl = 0x00,
 	},
 	.prescaler = 1,
+	.has_invert = 1,
 	.set_enable = rockchip_pwm_set_enable_v2,
 };
 
@@ -228,6 +252,10 @@  static int rockchip_pwm_probe(struct platform_device *pdev)
 	pc->data = id->data;
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &rockchip_pwm_ops;
+	if (pc->data->has_invert) {
+		pc->chip.of_xlate = of_pwm_xlate_with_flags;
+		pc->chip.of_pwm_n_cells = 3;
+	}
 	pc->chip.base = -1;
 	pc->chip.npwm = 1;