[5/6] dts, arm64: Move dts files to vendor subdirs

Message ID	1409899692-1455-6-git-send-email-rric@kernel.org (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: Robert Richter <rric@kernel.org> To: Olof Johansson <olof@lixom.net>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Arnd Bergmann <arnd@arndb.de>, Michal Marek <mmarek@suse.cz> Subject: [PATCH 5/6] dts, arm64: Move dts files to vendor subdirs Date: Fri, 5 Sep 2014 08:48:11 +0200 Message-Id: <1409899692-1455-6-git-send-email-rric@kernel.org> In-Reply-To: <1409899692-1455-1-git-send-email-rric@kernel.org> References: <1409899692-1455-1-git-send-email-rric@kernel.org> Cc: Robert Richter <rrichter@cavium.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kbuild@vger.kernel.org Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 9b8622532068..309c3dc4bb70 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,5 +1,5 @@ -dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb -dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb +dts-dirs += apm +dts-dirs += arm always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/apm-mustang.dts b/arch/arm64/boot/dts/apm-mustang.dts deleted file mode 100644 index b2f56229aa5e..000000000000 --- a/arch/arm64/boot/dts/apm-mustang.dts +++ /dev/null @@ -1,34 +0,0 @@ -/* - * dts file for AppliedMicro (APM) Mustang Board - * - * Copyright (C) 2013, Applied Micro Circuits Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/dts-v1/; - -/include/ "apm-storm.dtsi" - -/ { - model = "APM X-Gene Mustang board"; - compatible = "apm,mustang", "apm,xgene-storm"; - - chosen { }; - - memory { - device_type = "memory"; - reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ - }; -}; - -&serial0 { - status = "ok"; -}; - -&menet { - status = "ok"; -}; diff --git a/arch/arm64/boot/dts/apm-storm.dtsi b/arch/arm64/boot/dts/apm-storm.dtsi deleted file mode 100644 index c0aceef7f5b3..000000000000 --- a/arch/arm64/boot/dts/apm-storm.dtsi +++ /dev/null @@ -1,425 +0,0 @@ -/* - * dts file for AppliedMicro (APM) X-Gene Storm SOC - * - * Copyright (C) 2013, Applied Micro Circuits Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - */ - -/ { - compatible = "apm,xgene-storm"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@000 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@001 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@100 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@101 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@200 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x200>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@201 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x201>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@300 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x300>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - cpu@301 { - device_type = "cpu"; - compatible = "apm,potenza", "arm,armv8"; - reg = <0x0 0x301>; - enable-method = "spin-table"; - cpu-release-addr = <0x1 0x0000fff8>; - }; - }; - - gic: interrupt-controller@78010000 { - compatible = "arm,cortex-a15-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */ - <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ - <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ - <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ - interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 0 0xff01>, /* Secure Phys IRQ */ - <1 13 0xff01>, /* Non-secure Phys IRQ */ - <1 14 0xff01>, /* Virt IRQ */ - <1 15 0xff01>; /* Hyp IRQ */ - clock-frequency = <50000000>; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks { - #address-cells = <2>; - #size-cells = <2>; - ranges; - refclk: refclk { - compatible = "fixed-clock"; - #clock-cells = <1>; - clock-frequency = <100000000>; - clock-output-names = "refclk"; - }; - - pcppll: pcppll@17000100 { - compatible = "apm,xgene-pcppll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "pcppll"; - reg = <0x0 0x17000100 0x0 0x1000>; - clock-output-names = "pcppll"; - type = <0>; - }; - - socpll: socpll@17000120 { - compatible = "apm,xgene-socpll-clock"; - #clock-cells = <1>; - clocks = <&refclk 0>; - clock-names = "socpll"; - reg = <0x0 0x17000120 0x0 0x1000>; - clock-output-names = "socpll"; - type = <1>; - }; - - socplldiv2: socplldiv2 { - compatible = "fixed-factor-clock"; - #clock-cells = <1>; - clocks = <&socpll 0>; - clock-names = "socplldiv2"; - clock-mult = <1>; - clock-div = <2>; - clock-output-names = "socplldiv2"; - }; - - qmlclk: qmlclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "qmlclk"; - reg = <0x0 0x1703C000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "qmlclk"; - }; - - ethclk: ethclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - clock-names = "ethclk"; - reg = <0x0 0x17000000 0x0 0x1000>; - reg-names = "div-reg"; - divider-offset = <0x238>; - divider-width = <0x9>; - divider-shift = <0x0>; - clock-output-names = "ethclk"; - }; - - menetclk: menetclk { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&ethclk 0>; - reg = <0x0 0x1702C000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "menetclk"; - }; - - sataphy1clk: sataphy1clk@1f21c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f21c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy1clk"; - status = "disabled"; - csr-offset = <0x4>; - csr-mask = <0x00>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sataphy2clk: sataphy1clk@1f22c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f22c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy2clk"; - status = "ok"; - csr-offset = <0x4>; - csr-mask = <0x3a>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sataphy3clk: sataphy1clk@1f23c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f23c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sataphy3clk"; - status = "ok"; - csr-offset = <0x4>; - csr-mask = <0x3a>; - enable-offset = <0x0>; - enable-mask = <0x06>; - }; - - sata01clk: sata01clk@1f21c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f21c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata01clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - sata23clk: sata23clk@1f22c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f22c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata23clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - sata45clk: sata45clk@1f23c000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x1f23c000 0x0 0x1000>; - reg-names = "csr-reg"; - clock-output-names = "sata45clk"; - csr-offset = <0x4>; - csr-mask = <0x05>; - enable-offset = <0x0>; - enable-mask = <0x39>; - }; - - rtcclk: rtcclk@17000000 { - compatible = "apm,xgene-device-clock"; - #clock-cells = <1>; - clocks = <&socplldiv2 0>; - reg = <0x0 0x17000000 0x0 0x2000>; - reg-names = "csr-reg"; - csr-offset = <0xc>; - csr-mask = <0x2>; - enable-offset = <0x10>; - enable-mask = <0x2>; - clock-output-names = "rtcclk"; - }; - }; - - serial0: serial@1c020000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c020000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4c 0x4>; - }; - - serial1: serial@1c021000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c021000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4d 0x4>; - }; - - serial2: serial@1c022000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c022000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4e 0x4>; - }; - - serial3: serial@1c023000 { - status = "disabled"; - device_type = "serial"; - compatible = "ns16550a"; - reg = <0 0x1c023000 0x0 0x1000>; - reg-shift = <2>; - clock-frequency = <10000000>; /* Updated by bootloader */ - interrupt-parent = <&gic>; - interrupts = <0x0 0x4f 0x4>; - }; - - phy1: phy@1f21a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f21a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy1clk 0>; - status = "disabled"; - apm,tx-boost-gain = <30 30 30 30 30 30>; - apm,tx-eye-tuning = <2 10 10 2 10 10>; - }; - - phy2: phy@1f22a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f22a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy2clk 0>; - status = "ok"; - apm,tx-boost-gain = <30 30 30 30 30 30>; - apm,tx-eye-tuning = <1 10 10 2 10 10>; - }; - - phy3: phy@1f23a000 { - compatible = "apm,xgene-phy"; - reg = <0x0 0x1f23a000 0x0 0x100>; - #phy-cells = <1>; - clocks = <&sataphy3clk 0>; - status = "ok"; - apm,tx-boost-gain = <31 31 31 31 31 31>; - apm,tx-eye-tuning = <2 10 10 2 10 10>; - }; - - sata1: sata@1a000000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a000000 0x0 0x1000>, - <0x0 0x1f210000 0x0 0x1000>, - <0x0 0x1f21d000 0x0 0x1000>, - <0x0 0x1f21e000 0x0 0x1000>, - <0x0 0x1f217000 0x0 0x1000>; - interrupts = <0x0 0x86 0x4>; - dma-coherent; - status = "disabled"; - clocks = <&sata01clk 0>; - phys = <&phy1 0>; - phy-names = "sata-phy"; - }; - - sata2: sata@1a400000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a400000 0x0 0x1000>, - <0x0 0x1f220000 0x0 0x1000>, - <0x0 0x1f22d000 0x0 0x1000>, - <0x0 0x1f22e000 0x0 0x1000>, - <0x0 0x1f227000 0x0 0x1000>; - interrupts = <0x0 0x87 0x4>; - dma-coherent; - status = "ok"; - clocks = <&sata23clk 0>; - phys = <&phy2 0>; - phy-names = "sata-phy"; - }; - - sata3: sata@1a800000 { - compatible = "apm,xgene-ahci"; - reg = <0x0 0x1a800000 0x0 0x1000>, - <0x0 0x1f230000 0x0 0x1000>, - <0x0 0x1f23d000 0x0 0x1000>, - <0x0 0x1f23e000 0x0 0x1000>; - interrupts = <0x0 0x88 0x4>; - dma-coherent; - status = "ok"; - clocks = <&sata45clk 0>; - phys = <&phy3 0>; - phy-names = "sata-phy"; - }; - - rtc: rtc@10510000 { - compatible = "apm,xgene-rtc"; - reg = <0x0 0x10510000 0x0 0x400>; - interrupts = <0x0 0x46 0x4>; - #clock-cells = <1>; - clocks = <&rtcclk 0>; - }; - - menet: ethernet@17020000 { - compatible = "apm,xgene-enet"; - status = "disabled"; - reg = <0x0 0x17020000 0x0 0xd100>, - <0x0 0X17030000 0x0 0X400>, - <0x0 0X10000000 0x0 0X200>; - reg-names = "enet_csr", "ring_csr", "ring_cmd"; - interrupts = <0x0 0x3c 0x4>; - dma-coherent; - clocks = <&menetclk 0>; - local-mac-address = [00 01 73 00 00 01]; - phy-connection-type = "rgmii"; - phy-handle = <&menetphy>; - mdio { - compatible = "apm,xgene-mdio"; - #address-cells = <1>; - #size-cells = <0>; - menetphy: menetphy@3 { - compatible = "ethernet-phy-id001c.c915"; - reg = <0x3>; - }; - - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile new file mode 100644 index 000000000000..a2afabbc1717 --- /dev/null +++ b/arch/arm64/boot/dts/apm/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts new file mode 100644 index 000000000000..b2f56229aa5e --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -0,0 +1,34 @@ +/* + * dts file for AppliedMicro (APM) Mustang Board + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "apm-storm.dtsi" + +/ { + model = "APM X-Gene Mustang board"; + compatible = "apm,mustang", "apm,xgene-storm"; + + chosen { }; + + memory { + device_type = "memory"; + reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ + }; +}; + +&serial0 { + status = "ok"; +}; + +&menet { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi new file mode 100644 index 000000000000..c0aceef7f5b3 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -0,0 +1,425 @@ +/* + * dts file for AppliedMicro (APM) X-Gene Storm SOC + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "apm,xgene-storm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@001 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@100 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@101 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@200 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@201 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@300 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@301 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + }; + + gic: interrupt-controller@78010000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */ + <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ + <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ + <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ + interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 0 0xff01>, /* Secure Phys IRQ */ + <1 13 0xff01>, /* Non-secure Phys IRQ */ + <1 14 0xff01>, /* Virt IRQ */ + <1 15 0xff01>; /* Hyp IRQ */ + clock-frequency = <50000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "refclk"; + }; + + pcppll: pcppll@17000100 { + compatible = "apm,xgene-pcppll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "pcppll"; + reg = <0x0 0x17000100 0x0 0x1000>; + clock-output-names = "pcppll"; + type = <0>; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "socpll"; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + type = <1>; + }; + + socplldiv2: socplldiv2 { + compatible = "fixed-factor-clock"; + #clock-cells = <1>; + clocks = <&socpll 0>; + clock-names = "socplldiv2"; + clock-mult = <1>; + clock-div = <2>; + clock-output-names = "socplldiv2"; + }; + + qmlclk: qmlclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "qmlclk"; + reg = <0x0 0x1703C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "qmlclk"; + }; + + ethclk: ethclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "ethclk"; + reg = <0x0 0x17000000 0x0 0x1000>; + reg-names = "div-reg"; + divider-offset = <0x238>; + divider-width = <0x9>; + divider-shift = <0x0>; + clock-output-names = "ethclk"; + }; + + menetclk: menetclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&ethclk 0>; + reg = <0x0 0x1702C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "menetclk"; + }; + + sataphy1clk: sataphy1clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy1clk"; + status = "disabled"; + csr-offset = <0x4>; + csr-mask = <0x00>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy2clk: sataphy1clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy2clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy3clk: sataphy1clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy3clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sata01clk: sata01clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata01clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata23clk: sata23clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata23clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata45clk: sata45clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata45clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + rtcclk: rtcclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x2>; + enable-offset = <0x10>; + enable-mask = <0x2>; + clock-output-names = "rtcclk"; + }; + }; + + serial0: serial@1c020000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c020000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4c 0x4>; + }; + + serial1: serial@1c021000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c021000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4d 0x4>; + }; + + serial2: serial@1c022000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c022000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4e 0x4>; + }; + + serial3: serial@1c023000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c023000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4f 0x4>; + }; + + phy1: phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f21a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy1clk 0>; + status = "disabled"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + phy2: phy@1f22a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f22a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy2clk 0>; + status = "ok"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <1 10 10 2 10 10>; + }; + + phy3: phy@1f23a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f23a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy3clk 0>; + status = "ok"; + apm,tx-boost-gain = <31 31 31 31 31 31>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>, + <0x0 0x1f217000 0x0 0x1000>; + interrupts = <0x0 0x86 0x4>; + dma-coherent; + status = "disabled"; + clocks = <&sata01clk 0>; + phys = <&phy1 0>; + phy-names = "sata-phy"; + }; + + sata2: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>, + <0x0 0x1f227000 0x0 0x1000>; + interrupts = <0x0 0x87 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata23clk 0>; + phys = <&phy2 0>; + phy-names = "sata-phy"; + }; + + sata3: sata@1a800000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a800000 0x0 0x1000>, + <0x0 0x1f230000 0x0 0x1000>, + <0x0 0x1f23d000 0x0 0x1000>, + <0x0 0x1f23e000 0x0 0x1000>; + interrupts = <0x0 0x88 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata45clk 0>; + phys = <&phy3 0>; + phy-names = "sata-phy"; + }; + + rtc: rtc@10510000 { + compatible = "apm,xgene-rtc"; + reg = <0x0 0x10510000 0x0 0x400>; + interrupts = <0x0 0x46 0x4>; + #clock-cells = <1>; + clocks = <&rtcclk 0>; + }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0X400>, + <0x0 0X10000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x3c 0x4>; + dma-coherent; + clocks = <&menetclk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-connection-type = "rgmii"; + phy-handle = <&menetphy>; + mdio { + compatible = "apm,xgene-mdio"; + #address-cells = <1>; + #size-cells = <0>; + menetphy: menetphy@3 { + compatible = "ethernet-phy-id001c.c915"; + reg = <0x3>; + }; + + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile new file mode 100644 index 000000000000..43d1404bb3c1 --- /dev/null +++ b/arch/arm64/boot/dts/arm/Makefile @@ -0,0 +1,6 @@ +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts new file mode 100644 index 000000000000..4a060906809d --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -0,0 +1,232 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "Foundation-v8A"; + compatible = "arm,foundation-aarch64", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts new file mode 100644 index 000000000000..572005ea2217 --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -0,0 +1,159 @@ +/* + * ARM Ltd. Fast Models + * + * Architecture Envelope Model (AEM) ARMv8-A + * ARMAEMv8AMPCT + * + * RTSM_VE_AEMv8A.lisa + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "RTSM_VE_AEMv8A"; + compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi new file mode 100644 index 000000000000..ac2cb2418025 --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -0,0 +1,240 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; + clock-names = "clcdclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts deleted file mode 100644 index 4a060906809d..000000000000 --- a/arch/arm64/boot/dts/foundation-v8.dts +++ /dev/null @@ -1,232 +0,0 @@ -/* - * ARM Ltd. - * - * ARMv8 Foundation model DTS - */ - -/dts-v1/; - -/memreserve/ 0x80000000 0x00010000; - -/ { - model = "Foundation-v8A"; - compatible = "arm,foundation-aarch64", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>, - <0x00000008 0x80000000 0 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff01>, - <1 14 0xff01>, - <1 11 0xff01>, - <1 10 0xff01>; - clock-frequency = <100000000>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - }; - - smb { - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - arm,v2m-memory-map = "rs1"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@010000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - }; - - v2m_serial0: uart@090000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@0a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@0b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@0c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - virtio_block@0130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts deleted file mode 100644 index 572005ea2217..000000000000 --- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts +++ /dev/null @@ -1,159 +0,0 @@ -/* - * ARM Ltd. Fast Models - * - * Architecture Envelope Model (AEM) ARMv8-A - * ARMAEMv8AMPCT - * - * RTSM_VE_AEMv8A.lisa - */ - -/dts-v1/; - -/memreserve/ 0x80000000 0x00010000; - -/ { - model = "RTSM_VE_AEMv8A"; - compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - chosen { }; - - aliases { - serial0 = &v2m_serial0; - serial1 = &v2m_serial1; - serial2 = &v2m_serial2; - serial3 = &v2m_serial3; - }; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@2 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - cpu@3 { - device_type = "cpu"; - compatible = "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0x8000fff8>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>, - <0x00000008 0x80000000 0 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x0 0x2c001000 0 0x1000>, - <0x0 0x2c002000 0 0x1000>, - <0x0 0x2c004000 0 0x2000>, - <0x0 0x2c006000 0 0x2000>; - interrupts = <1 9 0xf04>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0xff01>, - <1 14 0xff01>, - <1 11 0xff01>, - <1 10 0xff01>; - clock-frequency = <100000000>; - }; - - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <0 60 4>, - <0 61 4>, - <0 62 4>, - <0 63 4>; - }; - - smb { - compatible = "simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 63>; - interrupt-map = <0 0 0 &gic 0 0 4>, - <0 0 1 &gic 0 1 4>, - <0 0 2 &gic 0 2 4>, - <0 0 3 &gic 0 3 4>, - <0 0 4 &gic 0 4 4>, - <0 0 5 &gic 0 5 4>, - <0 0 6 &gic 0 6 4>, - <0 0 7 &gic 0 7 4>, - <0 0 8 &gic 0 8 4>, - <0 0 9 &gic 0 9 4>, - <0 0 10 &gic 0 10 4>, - <0 0 11 &gic 0 11 4>, - <0 0 12 &gic 0 12 4>, - <0 0 13 &gic 0 13 4>, - <0 0 14 &gic 0 14 4>, - <0 0 15 &gic 0 15 4>, - <0 0 16 &gic 0 16 4>, - <0 0 17 &gic 0 17 4>, - <0 0 18 &gic 0 18 4>, - <0 0 19 &gic 0 19 4>, - <0 0 20 &gic 0 20 4>, - <0 0 21 &gic 0 21 4>, - <0 0 22 &gic 0 22 4>, - <0 0 23 &gic 0 23 4>, - <0 0 24 &gic 0 24 4>, - <0 0 25 &gic 0 25 4>, - <0 0 26 &gic 0 26 4>, - <0 0 27 &gic 0 27 4>, - <0 0 28 &gic 0 28 4>, - <0 0 29 &gic 0 29 4>, - <0 0 30 &gic 0 30 4>, - <0 0 31 &gic 0 31 4>, - <0 0 32 &gic 0 32 4>, - <0 0 33 &gic 0 33 4>, - <0 0 34 &gic 0 34 4>, - <0 0 35 &gic 0 35 4>, - <0 0 36 &gic 0 36 4>, - <0 0 37 &gic 0 37 4>, - <0 0 38 &gic 0 38 4>, - <0 0 39 &gic 0 39 4>, - <0 0 40 &gic 0 40 4>, - <0 0 41 &gic 0 41 4>, - <0 0 42 &gic 0 42 4>; - - /include/ "rtsm_ve-motherboard.dtsi" - }; -}; diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi deleted file mode 100644 index ac2cb2418025..000000000000 --- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi +++ /dev/null @@ -1,240 +0,0 @@ -/* - * ARM Ltd. Fast Models - * - * Versatile Express (VE) system model - * Motherboard component - * - * VEMotherBoard.lisa - */ - - motherboard { - arm,v2m-memory-map = "rs1"; - compatible = "arm,vexpress,v2m-p1", "simple-bus"; - #address-cells = <2>; /* SMB chipselect number and offset */ - #size-cells = <1>; - #interrupt-cells = <1>; - ranges; - - flash@0,00000000 { - compatible = "arm,vexpress-flash", "cfi-flash"; - reg = <0 0x00000000 0x04000000>, - <4 0x00000000 0x04000000>; - bank-width = <4>; - }; - - vram@2,00000000 { - compatible = "arm,vexpress-vram"; - reg = <2 0x00000000 0x00800000>; - }; - - ethernet@2,02000000 { - compatible = "smsc,lan91c111"; - reg = <2 0x02000000 0x10000>; - interrupts = <15>; - }; - - v2m_clk24mhz: clk24mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "v2m:clk24mhz"; - }; - - v2m_refclk1mhz: refclk1mhz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - clock-output-names = "v2m:refclk1mhz"; - }; - - v2m_refclk32khz: refclk32khz { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "v2m:refclk32khz"; - }; - - iofpga@3,00000000 { - compatible = "arm,amba-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 3 0 0x200000>; - - v2m_sysreg: sysreg@010000 { - compatible = "arm,vexpress-sysreg"; - reg = <0x010000 0x1000>; - gpio-controller; - #gpio-cells = <2>; - }; - - v2m_sysctl: sysctl@020000 { - compatible = "arm,sp810", "arm,primecell"; - reg = <0x020000 0x1000>; - clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; - clock-names = "refclk", "timclk", "apb_pclk"; - #clock-cells = <1>; - clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; - }; - - aaci@040000 { - compatible = "arm,pl041", "arm,primecell"; - reg = <0x040000 0x1000>; - interrupts = <11>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; - - mmci@050000 { - compatible = "arm,pl180", "arm,primecell"; - reg = <0x050000 0x1000>; - interrupts = <9 10>; - cd-gpios = <&v2m_sysreg 0 0>; - wp-gpios = <&v2m_sysreg 1 0>; - max-frequency = <12000000>; - vmmc-supply = <&v2m_fixed_3v3>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "mclk", "apb_pclk"; - }; - - kmi@060000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x060000 0x1000>; - interrupts = <12>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - kmi@070000 { - compatible = "arm,pl050", "arm,primecell"; - reg = <0x070000 0x1000>; - interrupts = <13>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "KMIREFCLK", "apb_pclk"; - }; - - v2m_serial0: uart@090000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x090000 0x1000>; - interrupts = <5>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial1: uart@0a0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0a0000 0x1000>; - interrupts = <6>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial2: uart@0b0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0b0000 0x1000>; - interrupts = <7>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - v2m_serial3: uart@0c0000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0c0000 0x1000>; - interrupts = <8>; - clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - wdt@0f0000 { - compatible = "arm,sp805", "arm,primecell"; - reg = <0x0f0000 0x1000>; - interrupts = <0>; - clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; - clock-names = "wdogclk", "apb_pclk"; - }; - - v2m_timer01: timer@110000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x110000 0x1000>; - interrupts = <2>; - clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - v2m_timer23: timer@120000 { - compatible = "arm,sp804", "arm,primecell"; - reg = <0x120000 0x1000>; - interrupts = <3>; - clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; - clock-names = "timclken1", "timclken2", "apb_pclk"; - }; - - rtc@170000 { - compatible = "arm,pl031", "arm,primecell"; - reg = <0x170000 0x1000>; - interrupts = <4>; - clocks = <&v2m_clk24mhz>; - clock-names = "apb_pclk"; - }; - - clcd@1f0000 { - compatible = "arm,pl111", "arm,primecell"; - reg = <0x1f0000 0x1000>; - interrupts = <14>; - clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; - clock-names = "clcdclk", "apb_pclk"; - }; - - virtio_block@0130000 { - compatible = "virtio,mmio"; - reg = <0x130000 0x200>; - interrupts = <42>; - }; - }; - - v2m_fixed_3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - mcc { - compatible = "arm,vexpress,config-bus"; - arm,vexpress,config-bridge = <&v2m_sysreg>; - - v2m_oscclk1: osc@1 { - /* CLCD clock */ - compatible = "arm,vexpress-osc"; - arm,vexpress-sysreg,func = <1 1>; - freq-range = <23750000 63500000>; - #clock-cells = <0>; - clock-output-names = "v2m:oscclk1"; - }; - - reset@0 { - compatible = "arm,vexpress-reset"; - arm,vexpress-sysreg,func = <5 0>; - }; - - muxfpga@0 { - compatible = "arm,vexpress-muxfpga"; - arm,vexpress-sysreg,func = <7 0>; - }; - - shutdown@0 { - compatible = "arm,vexpress-shutdown"; - arm,vexpress-sysreg,func = <8 0>; - }; - - reboot@0 { - compatible = "arm,vexpress-reboot"; - arm,vexpress-sysreg,func = <9 0>; - }; - - dvimode@0 { - compatible = "arm,vexpress-dvimode"; - arm,vexpress-sysreg,func = <11 0>; - }; - }; - };

[5/6] dts, arm64: Move dts files to vendor subdirs

Commit Message

Comments

Patch