diff mbox

[v6,09/12] ARM: dts: berlin: add BG2Q nodes for USB support

Message ID 1411468088-5702-10-git-send-email-antoine.tenart@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Antoine Tenart Sept. 23, 2014, 10:28 a.m. UTC 
Adds nodes describing the Marvell Berlin BG2Q USB PHY and USB. The BG2Q
SoC has 3 USB host controller, compatible with ChipIdea.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 52 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index ffba5c3bdab8..faf7cbe2af20 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -114,6 +114,39 @@ 
 			#interrupt-cells = <3>;
 		};
 
+		usb_phy2: phy@a2f400 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xa2f400 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 14>;
+			status = "disabled";
+		};
+
+		usb2: usb@a30000 {
+			compatible = "chipidea,usb2";
+			reg = <0xa30000 0x10000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB2>;
+			phys = <&usb_phy2>;
+			status = "disabled";
+		};
+
+		usb_phy0: phy@b74000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb74000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 12>;
+			status = "disabled";
+		};
+
+		usb_phy1: phy@b78000 {
+			compatible = "marvell,berlin2-usb-phy";
+			reg = <0xb78000 0x128>;
+			#phy-cells = <0>;
+			resets = <&chip 0x104 13>;
+			status = "disabled";
+		};
+
 		cpu-ctrl@dd0000 {
 			compatible = "marvell,berlin-cpu-ctrl";
 			reg = <0xdd0000 0x10000>;
@@ -348,6 +381,24 @@ 
 			};
 		};
 
+		usb0: usb@ed0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xed0000 0x10000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB0>;
+			phys = <&usb_phy0>;
+			status = "disabled";
+		};
+
+		usb1: usb@ee0000 {
+			compatible = "chipidea,usb2";
+			reg = <0xee0000 0x10000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&chip CLKID_USB1>;
+			phys = <&usb_phy1>;
+			status = "disabled";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -440,5 +491,6 @@ 
 				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
+
 	};
 };