From patchwork Wed Oct 8 05:27:01 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Scott Branden X-Patchwork-Id: 5051501 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 6187EC11AB for ; Wed, 8 Oct 2014 05:32:17 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 842BD201BC for ; Wed, 8 Oct 2014 05:32:14 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id B26BB201B9 for ; Wed, 8 Oct 2014 05:32:11 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XbjoY-0008Ih-NV; Wed, 08 Oct 2014 05:29:30 +0000 Received: from mail-gw1-out.broadcom.com ([216.31.210.62]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1XbjnB-0007dj-I1 for linux-arm-kernel@lists.infradead.org; Wed, 08 Oct 2014 05:28:12 +0000 X-IronPort-AV: E=Sophos;i="5.04,675,1406617200"; d="scan'208";a="47909455" Received: from irvexchcas07.broadcom.com (HELO IRVEXCHCAS07.corp.ad.broadcom.com) ([10.9.208.55]) by mail-gw1-out.broadcom.com with ESMTP; 07 Oct 2014 23:43:14 -0700 Received: from IRVEXCHSMTP2.corp.ad.broadcom.com (10.9.207.52) by IRVEXCHCAS07.corp.ad.broadcom.com (10.9.208.55) with Microsoft SMTP Server (TLS) id 14.3.174.1; Tue, 7 Oct 2014 22:27:51 -0700 Received: from mail-irva-13.broadcom.com (10.10.10.20) by IRVEXCHSMTP2.corp.ad.broadcom.com (10.9.207.52) with Microsoft SMTP Server id 14.3.174.1; Tue, 7 Oct 2014 22:27:51 -0700 Received: from mail.broadcom.com (lbrmn-lnxub113.ric.broadcom.com [10.136.13.65]) by mail-irva-13.broadcom.com (Postfix) with ESMTP id 3CF4640FE5; Tue, 7 Oct 2014 22:27:35 -0700 (PDT) From: Scott Branden To: Christian Daudt , Matt Porter , Russell King , , Mike Turquette , Alex Elder , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , "Kumar Gala" , Andrew Morton , "David S. Miller" , Greg Kroah-Hartman , Joe Perches , "Mauro Carvalho Chehab" , Antti Palosaari Subject: [PATCH 2/6] clk: Clock driver support for Broadcom Cygnus SoC Date: Tue, 7 Oct 2014 22:27:01 -0700 Message-ID: <1412746025-11998-3-git-send-email-sbranden@broadcom.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1412746025-11998-1-git-send-email-sbranden@broadcom.com> References: <1412746025-11998-1-git-send-email-sbranden@broadcom.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20141007_222805_954657_BD219504 X-CRM114-Status: GOOD ( 20.37 ) X-Spam-Score: -2.3 (--) Cc: devicetree@vger.kernel.org, Scott Branden , Ray Jui , linux-kernel@vger.kernel.org, Jonathan Richardson , JD Zheng , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_NONE, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Jonathan Richardson The iProc clock driver controls PLLs common across iProc chips. The cygnus driver controls cygnus specific features and variations. Reviewed-by: Ray Jui Tested-by: Jonathan Richardson Reviewed-by: JD (Jiandong) Zheng Signed-off-by: Scott Branden --- drivers/clk/Makefile | 1 + drivers/clk/bcm/Makefile | 2 + drivers/clk/bcm/clk-cygnus.c | 1186 ++++++++++++++++++++++++++++++++++++++++++ drivers/clk/bcm/clk-iproc.c | 451 ++++++++++++++++ 4 files changed, 1640 insertions(+) create mode 100644 drivers/clk/bcm/clk-cygnus.c create mode 100644 drivers/clk/bcm/clk-iproc.c diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f537a0b..8ac0a31 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_AT91) += at91/ +obj-$(CONFIG_ARCH_BCM_IPROC) += bcm/ obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/ obj-$(CONFIG_ARCH_BERLIN) += berlin/ obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/ diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 6297d05..f803919 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -2,3 +2,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o +obj-$(CONFIG_ARCH_BCM_IPROC) += clk-iproc.o +obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c new file mode 100644 index 0000000..2a4f976 --- /dev/null +++ b/drivers/clk/bcm/clk-cygnus.c @@ -0,0 +1,1186 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * The CRU contains two similar PLLs: LCPLL and GENPLL, + * both with several output channels divided from the PLL + * output. + */ + +#define CRU_LCPLL_CONTROL1_OFFSET 0x04 +#define CRU_LCPLL_STATUS_OFFSET 0x18 + +#define LCPLL0_PDIV_SHIFT 26 +#define LCPLL0_PDIV_MASK 0xf +#define LCPLL0_NDIV_SHIFT 16 +#define LCPLL0_NDIV_MASK 0x3ff +#define LCPLL_ENABLEB_CH_SHIFT 7 +#define LCPLL_ENABLEB_CH_MASK 0x3f +#define LCPLL_MDIV_MASK 0xff +#define LCPLL_STATUS_LOCK_SHIFT 12 + +#define LCPLL0_CONTROL0_OFFSET 0x00 +#define LCPLL0_CONTROL1_OFFSET 0x04 +#define LCPLL0_CONTROL2_OFFSET 0x08 +#define LCPLL0_CONTROL3_OFFSET 0x0c + +#define GENPLL_CONTROL0_OFFSET 0x00 +#define GENPLL_CONTROL1_OFFSET 0x04 +#define GENPLL_CONTROL2_OFFSET 0x08 +#define GENPLL_CONTROL3_OFFSET 0x0c +#define GENPLL_CONTROL4_OFFSET 0x10 +#define GENPLL_CONTROL5_OFFSET 0x14 +#define GENPLL_CONTROL6_OFFSET 0x18 +#define GENPLL_CONTROL7_OFFSET 0x1c +#define GENPLL_CONTROL8_OFFSET 0x20 +#define GENPLL_CONTROL9_OFFSET 0x24 +#define GENPLL_STATUS_OFFSET 0x28 + +#define GENPLL_ENABLEB_CH_SHIFT 0x6 +#define GENPLL_ENABLEB_CH_MASK 0x3f + +#define GENPLL_STATUS_LOCK_SHIFT 12 +#define GENPLL_STATUS_LOCK_MASK 1 +#define GENPLL_CONTROL4_NDIV_INT_SHIFT 20 +#define GENPLL_CONTROL4_NDIV_INT_MASK 0x3FF +#define GENPLL_CONTROL4_NDIV_FRAC_SHIFT 0 +#define GENPLL_CONTROL4_NDIV_FRAC_MASK 0xFFFFF +#define GENPLL_CONTROL5_PDIV_SHIFT 0 +#define GENPLL_CONTROL5_PDIV_MASK 0xF +#define GENPLL_MDIV_MASK 0xff + +#define MIPI_DSI_GENPLL_ENABLEB_CH_SHIFT 12 +#define NDIV_FRAC_DIVISOR 0x100000 + +#define ASIU_MIPI_GENPLL_PWRON_SHIFT 20 +#define ASIU_MIPI_GENPLL_PWRON_PLL_SHIFT 19 +#define ASIU_MIPI_GENPLL_PWRON_BG_SHIFT 18 +#define ASIU_MIPI_GENPLL_PWRON_LDO_SHIFT 17 +#define ASIU_MIPI_GENPLL_ISO_IN_SHIFT 16 +#define ASIU_AUDIO_GENPLL_PWRON_PLL_SHIFT 11 +#define ASIU_AUDIO_GENPLL_PWRON_BG_SHIFT 10 +#define ASIU_AUDIO_GENPLL_PWRON_LDO_SHIFT 9 +#define ASIU_AUDIO_GENPLL_ISO_IN 8 + +#define CLK_RATE_NO_DIV -1 + +/* + * The clock framework may call recalc even if a clock is is unused, and + * therefore before being prepared/enabled. State checking is done for the + * MIPI PLL to prevent reading from a MIPI DSI register before the PLL is + * powered up because it will cause corruption (imprecise external aborts) + * sometimer later on. + */ +enum clock_state { + CLK_ENABLED, + CLK_PREPARED, + CLK_DISABLED +}; + +struct cygnus_clk { + struct clk_hw hw; + void __iomem *regs_base; + void __iomem *pll_ctrl_reg; + void __iomem *clock_gate_ctrl_reg; + int chan; + int internal_div; + unsigned long rate; + enum clock_state state; +}; + +#define to_cygnus_clk(p) container_of(p, struct cygnus_clk, hw) + +/* Identifies LCPLL clock channels. */ +enum cygnus_lcpll_clk_chan { + LCPLL_CH0_PCIE_PHY_REF_CLK = 0, + LCPLL_CH1_DDR_CLK = 1, + LCPLL_CH2_SDIO_CLK = 2, + LCPLL_CH3_USB_PHY_REF_CLK = 3, + LCPLL_CH4_ASIU_SMART_CARD_CLK = 4, + LCPLL_CH5 = 5 +}; + +/* Identifies GENPLL clock channels. */ +enum cygnus_genpll_clk_chan { + GENPLL_CH0_AXI21_CLK = 0, + GENPLL_CH1_25MHZ_CLK = 1, + GENPLL_CH2_SYS_CLK = 2, + GENPLL_CH3_ETHERNET_CLK = 3, + GENPLL_CH4_ASIU_AUDIO_CLK = 4, + GENPLL_CH5_ASIU_CAN_CLK = 5 +}; + +/* + * Channels for Oscillator dervived clocks are values used to determine + * which clock to enable/disable from the top clock gating control. + */ +enum cygnus_osc_derived_clk_chan { + OSC_DERIVED_CH0_KEYPAD_CLK = 0, + OSC_DERIVED_CH1_ADC_CLK = 1, + OSC_DERIVED_CH2_PWM_CLK = 2, +}; + +enum cygnus_mipi_pll_clk_chan { + MIPI_PLL_CH0_MIPI_PHY_CLK = 0, + MIPI_PLL_CH1_LCD_CLK = 1, + MIPI_PLL_CH2_3D_GRAPHICS_CLK = 2, +}; + +/* Order of registers defined in DT. */ +enum cygnus_clk_dt_regs { + CYGNUS_CLK_BASE_REG = 0, + CYGNUS_CLK_GATE_CTRL_REG, + CYGNUS_PLL_CTRL_REG +}; + +enum cygnus_top_clk_gating_ctrl_offsets { + GFX_CLK_GATE_EN = 0, + AUD_CLK_GATE_EN, + CAM_CLK_GATE_EN, + MIPI_DSI_CLK_GATE_EN, + LCD_CLK_GATE_EN, + D1W_CLK_GATE_EN, + CAN_CLK_GATE_EN, + KEYPAD_CLK_GATE_EN, + SMARTCARD_CLK_GATE_EN, + ADC_CLK_GATE_EN, + CRYPTO_CLK_GATE_EN +}; + +/* + * Enable clocks controlled through the top clock gating control. + * + * @param enable true = enable clock, false = disable clock + */ +static void cygnus_clkgate_enable_disable(void __iomem *clkgate_reg, + enum cygnus_top_clk_gating_ctrl_offsets offset, bool enable) +{ + u32 val = readl(clkgate_reg); + + /* Enable or disable the clock. */ + if (enable) + val |= 1 << offset; + else + val &= ~(1 << offset); + + writel(val, clkgate_reg); +} + +/* + * Powers on/off the MIPI GENPLL using CRMU_PLL_AON_CTRL register. + * + * @param power_on true to power on PLL, false to power off + */ +static void cygnus_mipi_genpll_power_on_off(void __iomem *pll_ctrl_reg, + bool power_on) +{ + u32 val; + u32 pll_ldo_on = ((1 << ASIU_MIPI_GENPLL_PWRON_SHIFT) | + (1 << ASIU_MIPI_GENPLL_PWRON_PLL_SHIFT) | + (1 << ASIU_MIPI_GENPLL_PWRON_BG_SHIFT) | + (1 << ASIU_MIPI_GENPLL_PWRON_LDO_SHIFT)); + + val = readl(pll_ctrl_reg); + + /* + * Set PLL on/off. Set input isolation mode to 1 when disabled, 0 when + * enabled. + */ + if (power_on) { + val |= pll_ldo_on; + val &= ~(1 << ASIU_MIPI_GENPLL_ISO_IN_SHIFT); + } else { + val &= ~pll_ldo_on; + val |= 1 << ASIU_MIPI_GENPLL_ISO_IN_SHIFT; + } + + writel(val, pll_ctrl_reg); +} + +/* + * Powers on/off the audio PLL using CRMU_PLL_AON_CTRL register. + * + * @param power_on true to power on PLL, false to power off + */ +static void cygnus_audio_genpll_power_on_off(void __iomem *pll_ctrl_reg, + bool power_on) +{ + u32 val; + u32 pll_ldo_on = ((1 << ASIU_AUDIO_GENPLL_PWRON_PLL_SHIFT) | + (1 << ASIU_AUDIO_GENPLL_PWRON_BG_SHIFT) | + (1 << ASIU_AUDIO_GENPLL_PWRON_LDO_SHIFT)); + + val = readl(pll_ctrl_reg); + + /* + * Set PLL on/off. Set input isolation mode to 1 when disabled, 0 when + * enabled. + */ + if (power_on) { + val |= pll_ldo_on; + val &= ~(1 << ASIU_AUDIO_GENPLL_ISO_IN); + } else { + val &= ~pll_ldo_on; + val |= 1 << ASIU_AUDIO_GENPLL_ISO_IN; + } + + writel(val, pll_ctrl_reg); +} + +/* + * Get PLL running status and calculate output frequency + */ +static unsigned long cygnus_lcpll_status(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + u32 reg; + unsigned pdiv, ndiv; + + /* read status register */ + reg = readl(clk->regs_base + CRU_LCPLL_STATUS_OFFSET); + + /* Must be locked for proper PLL operation. */ + if ((reg & (1 << LCPLL_STATUS_LOCK_SHIFT)) == 0) { + clk->rate = 0; + return -EIO; + } + + /* + * Calculate PLL frequency based on LCPLL divider values: + * pdiv = LCPLL pre-divider ratio + * ndiv = LCPLL feedback divider + * + * The frequency is calculated by: + * ndiv * (parent clock rate / pdiv) + */ + + reg = readl(clk->regs_base + CRU_LCPLL_CONTROL1_OFFSET); + + /* feedback divider integer and fraction parts */ + pdiv = (reg >> LCPLL0_PDIV_SHIFT) & LCPLL0_PDIV_MASK; + ndiv = (reg >> LCPLL0_NDIV_SHIFT) & LCPLL0_NDIV_MASK; + + if (pdiv == 0) + return -EIO; + + clk->rate = ndiv * (parent_rate / pdiv); + + return clk->rate; +} + +static unsigned long cygnus_lcpll_clk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_lcpll_status(bcm_clk, parent_rate); +} + +static const struct clk_ops cygnus_lcpll_ops = { + .recalc_rate = cygnus_lcpll_clk_recalc_rate, +}; + +static int cygnus_lcpll_chan_status(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + void * __iomem base; + u32 reg; + unsigned enable; + unsigned mdiv; + int offset = 0; + int shift = 0; + + /* Register address is only stored in PLL structure */ + base = clk->regs_base; + BUG_ON(base == NULL); + + /* enable bit is in enableb_ch[] inversed */ + enable = ((readl(base + LCPLL0_CONTROL0_OFFSET) >> + LCPLL_ENABLEB_CH_SHIFT) & LCPLL_ENABLEB_CH_MASK) ^ + LCPLL_ENABLEB_CH_MASK; + + if ((enable & (1 << clk->chan)) == 0) { + clk->rate = 0; + return -EIO; + } + + /* MDIV for the 6 channels is spread over two registers. */ + switch (clk->chan) { + case LCPLL_CH0_PCIE_PHY_REF_CLK: + offset = LCPLL0_CONTROL2_OFFSET; shift = 0; + break; + + case LCPLL_CH1_DDR_CLK: + offset = LCPLL0_CONTROL2_OFFSET; shift = 10; + break; + + case LCPLL_CH2_SDIO_CLK: + offset = LCPLL0_CONTROL2_OFFSET; shift = 20; + break; + + case LCPLL_CH3_USB_PHY_REF_CLK: + offset = LCPLL0_CONTROL3_OFFSET; shift = 0; + break; + + case LCPLL_CH4_ASIU_SMART_CARD_CLK: + offset = LCPLL0_CONTROL3_OFFSET; shift = 10; + break; + + case LCPLL_CH5: + offset = LCPLL0_CONTROL3_OFFSET; shift = 20; + break; + + default: + return -EINVAL; + } + + /* Read MDIV for requested channel. */ + reg = readl(base + offset); + mdiv = (reg >> shift) & LCPLL_MDIV_MASK; + + /* when divisor is 0, it behaves as max+1 */ + if (mdiv == 0) + mdiv = 256; + + clk->rate = parent_rate / mdiv; + + pr_debug("LCPLL[%d] mdiv=%u Prate=%lu rate=%lu\n", + clk->chan, mdiv, parent_rate, clk->rate); + + return clk->rate; +} + +static unsigned long cygnus_lcpll_chan_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_lcpll_chan_status(bcm_clk, parent_rate); +} + +static const struct clk_ops cygnus_lcpll_chan_ops = { + .recalc_rate = cygnus_lcpll_chan_recalc_rate, +}; + +/* + * Get PLL running status and calculate output frequency + */ +static unsigned long cygnus_genpll_status(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + u32 reg; + unsigned pdiv; + unsigned ndiv_int; + unsigned ndiv_frac; + + /* Read PLL status register. It must be locked. */ + reg = readl(clk->regs_base + GENPLL_STATUS_OFFSET); + if ((reg & (1 << GENPLL_STATUS_LOCK_SHIFT)) == 0) { + clk->rate = 0; + return -EIO; + } + + /* Calculate PLL frequency */ + + /* Get PLL feedback divider values. */ + reg = readl(clk->regs_base + GENPLL_CONTROL4_OFFSET); + + /* feedback divider integer and fraction parts */ + ndiv_int = reg >> GENPLL_CONTROL4_NDIV_INT_SHIFT; + ndiv_frac = reg & GENPLL_CONTROL4_NDIV_INT_MASK; + ndiv_int += ndiv_frac / NDIV_FRAC_DIVISOR; + + /* Get pdiv - first 4 bits. */ + reg = readl(clk->regs_base + GENPLL_CONTROL5_OFFSET); + pdiv = reg & GENPLL_CONTROL5_PDIV_MASK; + if (pdiv == 0) + return -EIO; + + clk->rate = (parent_rate / pdiv) * ndiv_int; + + return clk->rate; +} + +static unsigned long cygnus_genpll_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_genpll_status(bcm_clk, parent_rate); +} + +static const struct clk_ops cygnus_genpll_ops = { + .recalc_rate = cygnus_genpll_recalc_rate, +}; + +/* + * Calculates clock rate of the GENPLL channel requested. The clock rate is + * calculated as: the configured clock rate + * Parent clock rate / mdiv + */ +static unsigned long cygnus_genpll_chan_get_rate(struct cygnus_clk *clk, + unsigned long parent_rate, int enableb_ch_shift) +{ + u32 reg; + unsigned enable; + unsigned mdiv; + unsigned offset = 0; + unsigned shift = 0; + + /* + * Read ENABLEB_CH to determine which channels are enabled. The enable + * bits are inversed: 0 = channel enabled, 1 = channel disabled. + */ + reg = readl(clk->regs_base + GENPLL_CONTROL1_OFFSET); + enable = ((reg >> enableb_ch_shift) & + GENPLL_ENABLEB_CH_MASK) ^ GENPLL_ENABLEB_CH_MASK; + + /* If channel is disabled the rate is 0. */ + if ((enable & (1 << clk->chan)) == 0) { + clk->rate = 0; + return -EIO; + } + + /* MDIV for the 6 channels is spread over two registers. */ + switch (clk->chan) { + case 0: + offset = GENPLL_CONTROL8_OFFSET; shift = 0; + break; + + case 1: + offset = GENPLL_CONTROL8_OFFSET; shift = 10; + break; + + case 2: + offset = GENPLL_CONTROL8_OFFSET; shift = 20; + break; + + case 3: + offset = GENPLL_CONTROL9_OFFSET; shift = 0; + break; + + case 4: + offset = GENPLL_CONTROL9_OFFSET; shift = 10; + break; + + case 5: + offset = GENPLL_CONTROL9_OFFSET; shift = 20; + break; + + default: + return -EINVAL; + } + + /* Read MDIV (post divider ratio) for requested channel. */ + reg = readl(clk->regs_base + offset); + mdiv = (reg >> shift) & GENPLL_MDIV_MASK; + + /* When divisor is 0, it behaves as max+1. */ + if (mdiv == 0) + mdiv = 256; + + clk->rate = parent_rate / mdiv; + + pr_debug("GENPLL[%d] mdiv=%u parent rate=%lu rate=%lu\n", + clk->chan, mdiv, parent_rate, clk->rate); + + return clk->rate; +} + +/* + * Powers on the audio PLL for the audio channel from the PLL. No other + * GENPLL channels require powering on. + */ +static int cygnus_genpll_chan_prepare(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + struct cygnus_clk *cyg_parent_clk = + to_cygnus_clk(__clk_get_hw(parent_clk)); + + if (WARN_ON(!cyg_parent_clk->pll_ctrl_reg)) + return -EIO; + + if (clk->chan == GENPLL_CH4_ASIU_AUDIO_CLK) { + pr_debug("GENPLL[%d]: Powering on audio PLL/LDO\n", clk->chan); + cygnus_audio_genpll_power_on_off( + cyg_parent_clk->pll_ctrl_reg, true); + } + + return 0; +} + +/* + * Powers off the audio PLL for the audio channel from the PLL. No other + * GENPLL channels require powering off. + */ +static void cygnus_genpll_chan_unprepare(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + struct cygnus_clk *cyg_parent_clk = + to_cygnus_clk(__clk_get_hw(parent_clk)); + + if (WARN_ON(!cyg_parent_clk->pll_ctrl_reg)) + return; + + if (clk->chan == GENPLL_CH4_ASIU_AUDIO_CLK) { + pr_debug("GENPLL[%d]: Powering down audio PLL and LDO\n", + clk->chan); + cygnus_audio_genpll_power_on_off(cyg_parent_clk->pll_ctrl_reg, + false); + } +} + +static unsigned long cygnus_genpll_chan_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_genpll_chan_get_rate(bcm_clk, parent_rate, + GENPLL_ENABLEB_CH_SHIFT); +} + +/* + * Enables GENPLL channels. The only PLL channel that is controlled through + * the top clock gating control is the audio clock which requires enabling. + * + * Individual channels aren't enabled/disabled on the PLL because they are + * enabled by default and drivers don't always refer to them, meaning the + * clock framework would disable them. This can be added later when power + * saving is a concern. + */ +static int cygnus_genpll_chan_enable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + struct cygnus_clk *cyg_parent_clk = + to_cygnus_clk(__clk_get_hw(parent_clk)); + int parent_rate; + + if (WARN_ON(!cyg_parent_clk->clock_gate_ctrl_reg)) + return -EIO; + + pr_debug("Enable GENPLL chan %d\n", clk->chan); + + if (clk->chan == GENPLL_CH4_ASIU_AUDIO_CLK) { + cygnus_clkgate_enable_disable( + cyg_parent_clk->clock_gate_ctrl_reg, + AUD_CLK_GATE_EN, true); + + /* Ensure parent's clock rate is calculated. */ + parent_rate = clk_get_rate(parent_clk); + if (WARN_ON(!parent_rate)) + return -EIO; + } + + return 0; +} + +static void cygnus_genpll_chan_disable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + struct cygnus_clk *cyg_parent_clk = + to_cygnus_clk(__clk_get_hw(parent_clk)); + + if (WARN_ON(!cyg_parent_clk->clock_gate_ctrl_reg)) + return; + + pr_debug("GENPLL: disable chan %d\n", clk->chan); + + /* Enable audio clock. */ + if (clk->chan == GENPLL_CH4_ASIU_AUDIO_CLK) + cygnus_clkgate_enable_disable( + cyg_parent_clk->clock_gate_ctrl_reg, + AUD_CLK_GATE_EN, false); +} + +static const struct clk_ops cygnus_genpll_chan_ops = { + .prepare = cygnus_genpll_chan_prepare, + .unprepare = cygnus_genpll_chan_unprepare, + .enable = cygnus_genpll_chan_enable, + .disable = cygnus_genpll_chan_disable, + .recalc_rate = cygnus_genpll_chan_recalc_rate, +}; + +static __init struct clk *cygnus_clock_init(struct device_node *node, + const struct clk_ops *ops) +{ + u32 channel = 0; + struct clk *clk; + struct cygnus_clk *cygnus_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + + pr_debug("Clock name %s\n", node->name); + + cygnus_clk = kzalloc(sizeof(*cygnus_clk), GFP_KERNEL); + if (WARN_ON(!cygnus_clk)) + return NULL; + + cygnus_clk->state = CLK_DISABLED; + + /* Read base address from device tree and map to virtual address. */ + cygnus_clk->regs_base = of_iomap(node, CYGNUS_CLK_BASE_REG); + if (WARN_ON(!cygnus_clk->regs_base)) + goto err_alloc; + + /* Read optional base addresses for PLL control and clock gating. */ + cygnus_clk->clock_gate_ctrl_reg = of_iomap(node, + CYGNUS_CLK_GATE_CTRL_REG); + cygnus_clk->pll_ctrl_reg = of_iomap(node, CYGNUS_PLL_CTRL_REG); + + of_property_read_u32(node, "channel", &channel); + cygnus_clk->chan = channel; + of_property_read_string(node, "clock-output-names", &clk_name); + + /* + * Internal divider is optional and used for PLL derived clocks with + * hardcoded dividers. + */ + cygnus_clk->internal_div = CLK_RATE_NO_DIV; + of_property_read_u32(node, "div", &cygnus_clk->internal_div); + + init.name = clk_name; + init.ops = ops; + init.flags = CLK_GET_RATE_NOCACHE; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + cygnus_clk->hw.init = &init; + + clk = clk_register(NULL, &cygnus_clk->hw); + if (WARN_ON(IS_ERR(clk))) + goto err_unmap; + + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (WARN_ON(IS_ERR_VALUE(rc))) + goto err_unregister; + + rc = clk_register_clkdev(clk, clk_name, NULL); + if (WARN_ON(IS_ERR_VALUE(rc))) + goto err_provider; + + return clk; + +err_provider: + of_clk_del_provider(node); + +err_unregister: + clk_unregister(clk); + +err_unmap: + iounmap(cygnus_clk->regs_base); + iounmap(cygnus_clk->clock_gate_ctrl_reg); + iounmap(cygnus_clk->pll_ctrl_reg); + +err_alloc: + kfree(cygnus_clk); + + return NULL; +} + +static void __init cygnus_lcpll_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_lcpll_ops); +} +CLK_OF_DECLARE(cygnus_lcpll, "brcm,cygnus-lcpll-clk", cygnus_lcpll_init); + +static void __init cygnus_genpll_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_genpll_ops); +} +CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll-clk", cygnus_genpll_init); + +static void __init cygnus_lcpll_ch_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_lcpll_chan_ops); +} +CLK_OF_DECLARE(cygnus_lcpll_ch, "brcm,cygnus-lcpll-ch", cygnus_lcpll_ch_init); + +static void __init cygnus_genpll_ch_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_genpll_chan_ops); +} +CLK_OF_DECLARE(cygnus_genpll_ch, "brcm,cygnus-genpll-ch", + cygnus_genpll_ch_init); + +/* + * Some clocks on Cygnus are derived from the oscillator directly without + * going through either the GENPLL or LCPLL. These clocks have specific + * registers for their dividers. The clocks included are: keypad, ADC, PWM. + */ + +#define ASIU_CLK_DIV_ENABLE_SHIFT 31 +#define ASIU_CLK_DIV_ENABLE_MASK 0x1 +#define ASIU_CLK_DIV_HIGH_SHIFT 16 +#define ASIU_CLK_DIV_HIGH_MASK 0x3ff +#define ASIU_CLK_DIV_LOW_SHIFT 0 +#define ASIU_CLK_DIV_LOW_MASK 0x3ff + +/* + * Calculate clock frequency for clocks derived from oscillator. + * + * @return The clock rate in Hz + */ +static int cygnus_osc_derived_clk_get_rate(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + int reg_val; + int enabled; + int clk_div_high; + int clk_div_low; + unsigned long rate = 0; + + reg_val = readl(clk->regs_base); + + /* Ensure clock is enabled. */ + enabled = (reg_val >> ASIU_CLK_DIV_ENABLE_SHIFT) & + ASIU_CLK_DIV_ENABLE_MASK; + if (!enabled) + return rate; + + clk_div_high = (reg_val >> ASIU_CLK_DIV_HIGH_SHIFT) & + ASIU_CLK_DIV_HIGH_MASK; + clk_div_high += 1; + + clk_div_low = (reg_val >> ASIU_CLK_DIV_LOW_SHIFT) & + ASIU_CLK_DIV_LOW_MASK; + clk_div_low += 1; + + /* + * Rate calculated as: + * (oscillator rate) / ((clk high + 1) + (clk_low + 1)) + */ + rate = parent_rate / (clk_div_high + clk_div_low); + + pr_debug("Osc derived clk: Prate=%lu div_high=%d div_low=%d rate=%lu\n", + parent_rate, clk_div_high, clk_div_low, rate); + + return rate; +} + +static unsigned long cygnus_osc_derived_clk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_osc_derived_clk_get_rate(bcm_clk, parent_rate); +} + +/* + * Enables the top clock gating control for clocks that require it. + */ +static int cygnus_osc_derived_clk_enable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + int parent_rate; + u32 val; + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return 0; + + pr_debug("OSC derived clk enable chan %d\n", clk->chan); + + /* Enable top clock gating control if necessary. */ + if (clk->chan == OSC_DERIVED_CH0_KEYPAD_CLK) + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + KEYPAD_CLK_GATE_EN, true); + else if (clk->chan == OSC_DERIVED_CH1_ADC_CLK) + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + ADC_CLK_GATE_EN, true); + + /* Set and enable divider if specified. */ + if (clk->internal_div != CLK_RATE_NO_DIV) { + val = (1 << ASIU_CLK_DIV_ENABLE_SHIFT) | + ((clk->internal_div & ASIU_CLK_DIV_HIGH_MASK) << + ASIU_CLK_DIV_HIGH_SHIFT) | + ((clk->internal_div & ASIU_CLK_DIV_LOW_MASK) << + ASIU_CLK_DIV_LOW_SHIFT); + writel(val, clk->regs_base); + } + + /* Ensure parent's clock rate is calculated. */ + parent_rate = clk_get_rate(parent_clk); + if (WARN_ON(!parent_rate)) + return -EIO; + + return 0; +} + +/* + * Disables top clock gating control for clocks that were enabled. + */ +static void cygnus_osc_derived_clk_disable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return; + + pr_debug("OSC derived clk disable chan %d\n", clk->chan); + + /* Disable top clock gating control if necessary. */ + if (clk->chan == OSC_DERIVED_CH0_KEYPAD_CLK) + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + KEYPAD_CLK_GATE_EN, false); + else if (clk->chan == OSC_DERIVED_CH1_ADC_CLK) + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + ADC_CLK_GATE_EN, false); +} + +static const struct clk_ops cygnus_osc_derived_clk_ops = { + .enable = cygnus_osc_derived_clk_enable, + .disable = cygnus_osc_derived_clk_disable, + .recalc_rate = cygnus_osc_derived_clk_recalc_rate, +}; + +static void __init cygnus_osc_derived_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_osc_derived_clk_ops); +} + +CLK_OF_DECLARE(cygnus_osc_derived, "brcm,cygnus-osc-derived", + cygnus_osc_derived_init); + +/* + * Some clocks are derived from a PLL. The dividers are internal and can't + * be read from a register. If the parent clock rate changes then the derived + * clock rates scale accordingly. + */ + + /* + * Calculate clock frequency for clocks derived from oscillator. + * Rate calculated as: parent rate / internal divider + * The internal divider must be specified in DT. + * + * @return The clock rate in Hz. + */ +static unsigned long cygnus_pll_derived_clk_get_rate(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + unsigned long rate = parent_rate / clk->internal_div; + + pr_debug("PLL derived clk: Prate=%lu rate=%lu\n", parent_rate, rate); + + return rate; +} + +static unsigned long cygnus_pll_derived_clk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + return cygnus_pll_derived_clk_get_rate(bcm_clk, parent_rate); +} + +static const struct clk_ops cygnus_pll_derived_clk_ops = { + .recalc_rate = cygnus_pll_derived_clk_recalc_rate, +}; + +static void __init cygnus_pll_derived_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_pll_derived_clk_ops); +} + +CLK_OF_DECLARE(cygnus_pll_derived, "brcm,cygnus-pll-derived", + cygnus_pll_derived_init); + +/* + * MIPI DSI GENPLL + */ + +/* + * Get PLL running status and calculate output frequency. + */ +static unsigned long cygnus_mipipll_get_rate(struct cygnus_clk *clk, + unsigned long parent_rate) +{ + u32 reg; + u32 rate; + u32 pdiv; + u32 ndiv_int; + u32 ndiv_frac; + int pll_locked; + + /* Read lock field from PLL status register. It must be unlocked. */ + reg = readl(clk->regs_base + GENPLL_STATUS_OFFSET); + + pll_locked = (reg >> GENPLL_STATUS_LOCK_SHIFT) & + GENPLL_STATUS_LOCK_MASK; + if (pll_locked) { + clk->rate = 0; + return -EIO; + } + /* + * Calculate PLL frequency: + * PLL freq = ((crystal clock / pdiv) * ndiv ) / mdiv + */ + + /* Get PLL feedback divider values. */ + reg = readl(clk->regs_base + GENPLL_CONTROL4_OFFSET); + + /* Feedback divider integer and fractional parts. */ + ndiv_int = (reg >> GENPLL_CONTROL4_NDIV_INT_SHIFT) & + GENPLL_CONTROL4_NDIV_INT_MASK; + ndiv_frac = (reg >> GENPLL_CONTROL4_NDIV_FRAC_SHIFT) & + GENPLL_CONTROL4_NDIV_FRAC_MASK; + ndiv_int += ndiv_frac / NDIV_FRAC_DIVISOR; + + /* Get pdiv. */ + reg = readl(clk->regs_base + GENPLL_CONTROL5_OFFSET); + pdiv = (reg >> GENPLL_CONTROL5_PDIV_SHIFT) & + GENPLL_CONTROL5_PDIV_MASK; + + /* If pdiv is 0, divide by 0.5 - doubler. */ + if (pdiv == 0) + rate = parent_rate * 2; + else + rate = parent_rate / pdiv; + + clk->rate = rate * ndiv_int; + + pr_debug("[MIPI PLL] parent rate=%lu, ndiv int=%d, pdiv=%d, rate=%lu\n", + parent_rate, ndiv_int, pdiv, clk->rate); + + return clk->rate; +} + +/* + * Powers on the necessary PLL's and LDO for MIPI GEN PLL. + */ +static int cygnus_mipipll_prepare(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->pll_ctrl_reg)) + return -EIO; + + pr_debug("Powering up MIPI PLL and LDO\n"); + + /* Power on the PLL. */ + cygnus_mipi_genpll_power_on_off(clk->pll_ctrl_reg, true); + + clk->state = CLK_PREPARED; + + return 0; +} + +/* + * Powers off the PLL's and LDO for MIPI GEN PLL. + */ +static void cygnus_mipipll_unprepare(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->pll_ctrl_reg)) + return; + + pr_debug("Powering down MIPI PLL and LDO\n"); + + /* Power off the PLL. */ + cygnus_mipi_genpll_power_on_off(clk->pll_ctrl_reg, false); + + clk->state = CLK_DISABLED; +} + +static unsigned long cygnus_mipipll_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *bcm_clk = to_cygnus_clk(hwclk); + + if (bcm_clk->state != CLK_ENABLED) + return 0; + + return cygnus_mipipll_get_rate(bcm_clk, parent_rate); +} + +/* + * Enables the MIPI DSI clock gate through the top clock gating control. + */ +static int cygnus_mipipll_enable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return -EIO; + + pr_debug("Enable MIPI PLL\n"); + + /* Enable MIPI DSI clock. */ + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + MIPI_DSI_CLK_GATE_EN, true); + + clk->state = CLK_ENABLED; + + return 0; +} + +/* + * Turns off the MIPI PLL clock. + */ +static void cygnus_mipipll_disable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return; + + pr_debug("Disabling MIPI PLL and LDO\n"); + + /* Disable MIPI DSI clock through top clock gating control. */ + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + MIPI_DSI_CLK_GATE_EN, false); + + clk->state = CLK_DISABLED; +} + +static const struct clk_ops cygnus_mipipll_ops = { + .prepare = cygnus_mipipll_prepare, + .unprepare = cygnus_mipipll_unprepare, + .enable = cygnus_mipipll_enable, + .disable = cygnus_mipipll_disable, + .recalc_rate = cygnus_mipipll_recalc_rate, +}; + +static void __init cygnus_mipipll_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_mipipll_ops); +} +CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll-clk", cygnus_mipipll_init); + +/* + * MIPI PLL clock channel management. + */ + +/* + * Enables a MIPI PLL channel. + */ +static void mipi_pll_enable_chan(void __iomem *base, int chan, bool state) +{ + u32 val; + + val = readl(base + GENPLL_CONTROL1_OFFSET); + + /* ENABLEB_CH bit set to 0 to enable channel, 1 to disable. */ + if (state) + val &= ~(1 << (chan + MIPI_DSI_GENPLL_ENABLEB_CH_SHIFT)); + else + val |= (1 << (chan + MIPI_DSI_GENPLL_ENABLEB_CH_SHIFT)); + + writel(val, base + GENPLL_CONTROL1_OFFSET); +} + +static unsigned long cygnus_mipipll_chan_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return 0; + + if (clk->state != CLK_ENABLED) + return 0; + + return cygnus_genpll_chan_get_rate(clk, parent_rate, + MIPI_DSI_GENPLL_ENABLEB_CH_SHIFT); +} + +/* + * Enables the PLL channel and the top clock gating control for clocks that + * are controlled through it. + */ +static int cygnus_mipipll_chan_enable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + struct clk *parent_clk = clk_get_parent(hwclk->clk); + int parent_rate; + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return -EIO; + + pr_debug("Enable MIPI PLL chan %d\n", clk->chan); + + /* + * Some MIPI PLL channels have to be enabled through the top clock + * gating ctrl. Add support for other channels here. + */ + if (clk->chan == MIPI_PLL_CH1_LCD_CLK) { + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + LCD_CLK_GATE_EN, true); + } + + /* Enable the PLL channel. */ + mipi_pll_enable_chan(clk->regs_base, clk->chan, true); + + clk->state = CLK_ENABLED; + + /* Ensure parent's clock rate is calculated. */ + parent_rate = clk_get_rate(parent_clk); + if (WARN_ON(!parent_rate)) + return -EIO; + + return 0; +} + +/* + * Disables the PLL channel. Some channels also have to be shut down through + * the top clock gating control. + */ +static void cygnus_mipipll_chan_disable(struct clk_hw *hwclk) +{ + struct cygnus_clk *clk = to_cygnus_clk(hwclk); + + if (WARN_ON(!clk->clock_gate_ctrl_reg)) + return; + + pr_debug("Disable MIPI PLL chan %d\n", clk->chan); + + /* Disable LCD clock through top clock gating control. */ + if (clk->chan == MIPI_PLL_CH1_LCD_CLK) { + cygnus_clkgate_enable_disable(clk->clock_gate_ctrl_reg, + LCD_CLK_GATE_EN, false); + } + + /* Disable the PLL channel. */ + mipi_pll_enable_chan(clk->regs_base, clk->chan, false); + + clk->state = CLK_DISABLED; +} + +static const struct clk_ops cygnus_mipipll_chan_ops = { + .enable = cygnus_mipipll_chan_enable, + .disable = cygnus_mipipll_chan_disable, + .recalc_rate = cygnus_mipipll_chan_recalc_rate, +}; + +static void __init cygnus_mipipll_ch_init(struct device_node *node) +{ + cygnus_clock_init(node, &cygnus_mipipll_chan_ops); +} + +CLK_OF_DECLARE(cygnus_mipipll_ch, "brcm,cygnus-mipipll-ch", + cygnus_mipipll_ch_init); diff --git a/drivers/clk/bcm/clk-iproc.c b/drivers/clk/bcm/clk-iproc.c new file mode 100644 index 0000000..aca4851 --- /dev/null +++ b/drivers/clk/bcm/clk-iproc.c @@ -0,0 +1,451 @@ +/* + * Copyright 2014 Broadcom Corporation. All rights reserved. + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define IPROC_CLK_POLICY_FREQ_OFFSET 0x008 +#define IPROC_CLK_POLICY0_MSK_OFFSET 0x010 +#define IPROC_CLK_APB_SW_DIV_OFFSET 0xA10 +#define IPROC_CLK_PLL_ARMA_OFFSET 0xC00 +#define IPROC_CLK_PLL_ARMB_OFFSET 0xC04 +#define IPROC_CLK_PLL_ARMC_OFFSET 0xC08 +#define IPROC_CLK_PLL_ARMCTL5_OFFSET 0xC20 +#define IPROC_CLK_PLL_ARM_OFFSET_OFFSET 0xC24 +#define IPROC_CLK_ARM_DIV_OFFSET 0xE00 +#define IPROC_CLK_POLICY_DBG_OFFSET 0xEC0 + +#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_OVERRIDE_SHIFT 4 +#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK 0xf +#define IPROC_CLK_POLICY_FREQ_OFFSET_POLICY_FREQ_MASK 0xf +#define IPROC_CLK_POLICY_FREQ_OFFSET_POLICY_FREQ_SHIFT 8 +#define IPROC_CLK_POLICY_DBG_OFFSET_ACT_FREQ_SHIFT 12 +#define IPROC_CLK_POLICY_DBG_OFFSET_ACT_FREQ_MASK 7 +#define IPROC_CLK_PLL_ARM_OFFSET_PLLARM_OFFSET_SW_CTL_SHIFT 29 +#define CLK_PLL_ARM_OFFSET_PLLARM_NDIV_INT_OFFSET 20 +#define CLK_PLL_ARM_OFFSET_PLLARM_NDIV_INT_MASK 0xff +#define CLK_PLL_ARM_OFFSET_PLLARM_NDIV_FRAC_OFFSET 0xfffff +#define CLK_PLL_ARMA_PLLARM_NDIV_INT_SHIFT 8 +#define CLK_PLL_ARMA_PLLARM_NDIV_INT_MASK 0x3ff +#define CLK_PLL_ARMB_PLLARM_NDIV_FRAC_MASK 0xfffff +#define CLK_PLL_ARMC_PLLARM_MDIV_MASK 0xff +#define CLK_PLL_ARMCTL5_PLLARM_H_MDIV_MASK 0xff +#define CLK_PLL_ARMC_PLLARM_BYPCLK_EN_SHIFT 8 +#define CLK_PLL_ARMA_PLLARM_PDIV_SHIFT 24 +#define CLK_PLL_ARMA_PLLARM_PDIV_MASK 0xf +#define CLK_PLL_ARMA_PLLARM_LOCK_SHIFT 28 +#define CLK_ARM_DIV_APB0_FREE_DIV_SHIFT 8 +#define CLK_ARM_DIV_APB0_FREE_DIV_MASK 0x7 +#define CLK_ARM_DIV_ARM_SWITCH_DIV_SHIFT 8 +#define CLK_ARM_DIV_ARM_SWITCH_DIV_MASK 0x3 +#define CLK_APB_SW_DIV_APB_CLK_DIV_MASK 0x3 + +struct brcm_clk { + struct clk_hw hw; + void __iomem *regs_base; + int chan; + unsigned long rate; +}; + +/* Identifies derived clocks from ARM PLL. */ +enum { + ARMPLL_APB0_FREE_CLK = 0, + ARMPLL_ARM_SWITCH_CLK = 1, + ARMPLL_ARM_APB_CLK = 2, + ARMPLL_ARM_PERIPH_CLK = 3 +}; + +/* Frequency id's from policy0_freq field of POLICY_FREQ register. */ +enum a9pll_policy_freq { + PLL_CRYSTAL_CLK = 0, + PLL_SYS_CLK = 2, + PLL_CH0_SLOW_CLK = 6, + PLL_CH1_FAST_CLK = 7 +}; + +#define to_brcm_clk(p) container_of(p, struct brcm_clk, hw) + +static int iproc_cru_arm_freq_id(void __iomem *regs_base) +{ + u32 reg_f, reg; + unsigned policy = 0; + unsigned fid; + unsigned active_freq; + + /* Read policy frequency. */ + reg_f = readl(regs_base + IPROC_CLK_POLICY_FREQ_OFFSET); + + /* Check for PLL policy software override. */ + reg = readl(regs_base + IPROC_CLK_ARM_DIV_OFFSET); + if (reg & (1 << IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_OVERRIDE_SHIFT)) + policy = reg & IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK; + + /* Get frequency ID based on policy. */ + fid = (reg_f >> + (IPROC_CLK_POLICY_FREQ_OFFSET_POLICY_FREQ_SHIFT * policy)) & + IPROC_CLK_POLICY_FREQ_OFFSET_POLICY_FREQ_MASK; + + /* Verify freq id from debug register. */ + reg = readl(regs_base + IPROC_CLK_POLICY_DBG_OFFSET); + /* Read current active frequency id. */ + active_freq = IPROC_CLK_POLICY_DBG_OFFSET_ACT_FREQ_MASK & + (reg >> IPROC_CLK_POLICY_DBG_OFFSET_ACT_FREQ_SHIFT); + + if (fid != active_freq) { + pr_debug("IPROC CRU clock frequency id override %d->%d\n", + fid, active_freq); + + fid = active_freq; + } + + pr_debug("Active frequency ID %d\n", fid); + + return fid; +} + +/* + * Get ndiv integer and combine with fractional part to create 64 bit + * value. + */ +static u64 a9pll_get_ndiv(struct brcm_clk *clk) +{ + u32 arm_offset_reg; + u32 pllarma_reg; + u32 pllarmb_reg; + u32 ndiv_int; + u32 ndiv_frac; + u64 ndiv; + + arm_offset_reg = readl(clk->regs_base + + IPROC_CLK_PLL_ARM_OFFSET_OFFSET); + + /* + * Check if offset mode is active to determine which register to + * get ndiv from. + */ + if (arm_offset_reg & + (1 << IPROC_CLK_PLL_ARM_OFFSET_PLLARM_OFFSET_SW_CTL_SHIFT)) { + /* Offset mode active. Get integer divide from offset reg. */ + ndiv_int = (arm_offset_reg >> + CLK_PLL_ARM_OFFSET_PLLARM_NDIV_INT_OFFSET) & + CLK_PLL_ARM_OFFSET_PLLARM_NDIV_INT_MASK; + + if (ndiv_int == 0) + ndiv_int = 256; + + /* Get ndiv fractional divider. */ + ndiv_frac = arm_offset_reg & + CLK_PLL_ARM_OFFSET_PLLARM_NDIV_FRAC_OFFSET; + } else { + /* Offset mode not active so read PLL ndiv from PLLARMA. */ + pllarma_reg = readl(clk->regs_base + IPROC_CLK_PLL_ARMA_OFFSET); + ndiv_int = (pllarma_reg >> CLK_PLL_ARMA_PLLARM_NDIV_INT_SHIFT) & + CLK_PLL_ARMA_PLLARM_NDIV_INT_MASK; + + if (ndiv_int == 0) + ndiv_int = 1024; + + /* Get ndiv fractional divider. */ + pllarmb_reg = readl(clk->regs_base + IPROC_CLK_PLL_ARMB_OFFSET); + ndiv_frac = pllarmb_reg & CLK_PLL_ARMB_PLLARM_NDIV_FRAC_MASK; + } + + ndiv = ((u64) ndiv_int << 20) | ndiv_frac; + + return ndiv; +} + +/* + * Determine mdiv (post divider) based on the frequency id being used. + * There are 4 clocks that can be used to derive the output clock rate: + * - 25 MHz crystal + * - sys_clk + * - channel 0 (slow clock) + * - channel 1 (fast clock) + * + * If the slow clock is being used then mdiv is read from PLLARMC. If + * the fast clock is being used then the channel 1 mdiv is used. + * Otherwise there is no post divider. + * + * @return The mdiv value. -EIO if an error occurred. + */ +static int a9pll_get_mdiv(struct brcm_clk *clk) +{ + u32 mdiv; + u32 pllarmc_reg; + u32 armctl5_reg; + u32 freq_id; + + /* Get the policy frequency. */ + freq_id = iproc_cru_arm_freq_id(clk->regs_base); + + switch (freq_id) { + /* There is no divider for these frequency id's. */ + case PLL_CRYSTAL_CLK: + case PLL_SYS_CLK: + mdiv = 1; + break; + + case PLL_CH0_SLOW_CLK: { + /* Read mdiv (post-divider) from PLLARMC bits 0:7 */ + pllarmc_reg = readl(clk->regs_base + IPROC_CLK_PLL_ARMC_OFFSET); + mdiv = pllarmc_reg & CLK_PLL_ARMC_PLLARM_MDIV_MASK; + if (mdiv == 0) + mdiv = 256; + break; + } + + case PLL_CH1_FAST_CLK: { + /* Post divider for channel 1 is in CTL5 (pllarm_h_mdiv). */ + armctl5_reg = readl(clk->regs_base + + IPROC_CLK_PLL_ARMCTL5_OFFSET); + mdiv = armctl5_reg & CLK_PLL_ARMCTL5_PLLARM_H_MDIV_MASK; + if (mdiv == 0) + mdiv = 256; + break; + } + + default: + return -EIO; + } + + return mdiv; +} + +/* + * Calculate the output frequency of the ARM PLL. The main output clock + * is 'arm_clk'. + * + * The frequency is calculated based on the ARM PLL divider values: + * pdiv = ARM PLL input pre-divider + * ndiv = ARM PLL feedback divider + * mdiv = ARM PLL post divider + * + * The frequency is calculated by: + * ((ndiv * parent clock rate) / pdiv) / mdiv + */ +static int a9pll_status(struct brcm_clk *clk, unsigned long parent_rate) +{ + u32 pllarma_reg; + u32 pllarmc_reg; + u32 pdiv; + u32 mdiv; + u64 ndiv; + u32 arm_clk_freq; + + pr_debug("a9pll_status: clk 0x%x\n", (unsigned int)clk); + + BUG_ON(!clk->regs_base); + + pllarma_reg = readl(clk->regs_base + IPROC_CLK_PLL_ARMA_OFFSET); + pllarmc_reg = readl(clk->regs_base + IPROC_CLK_PLL_ARMC_OFFSET); + + /* Check if PLL is in bypass mode - input frequency to output */ + if (pllarmc_reg & (1 << CLK_PLL_ARMC_PLLARM_BYPCLK_EN_SHIFT)) { + clk->rate = parent_rate; + return 0; + } + + /* Check if PLL is locked. It must be unlocked. */ + if ((pllarma_reg & + (1 << CLK_PLL_ARMA_PLLARM_LOCK_SHIFT)) == 0) { + clk->rate = 0; + return -EIO; + } + + /* Read pdiv from PLLARMA. */ + pdiv = (pllarma_reg >> CLK_PLL_ARMA_PLLARM_PDIV_SHIFT) & + CLK_PLL_ARMA_PLLARM_PDIV_MASK; + if (pdiv == 0) + pdiv = 16; + + /* Determine ndiv. */ + ndiv = a9pll_get_ndiv(clk); + + /* Determine mdiv (post divider). */ + mdiv = a9pll_get_mdiv(clk); + if (mdiv == -EIO) { + clk->rate = 0; + return -EIO; + } + + /* Calculate clock frequency. */ + arm_clk_freq = (ndiv * parent_rate) >> 20; + arm_clk_freq = (arm_clk_freq / pdiv) / mdiv; + + clk->rate = arm_clk_freq; + + pr_debug("ARM PLL (arm_clk) rate %lu. parent rate = %lu, ", + clk->rate, parent_rate); + pr_debug("ndiv_int = %d, pdiv = %d, mdiv = %d\n", + (u32)ndiv >> 20, pdiv, mdiv); + + return clk->rate; +} + +static unsigned long clk_a9pll_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct brcm_clk *bcm_clk = to_brcm_clk(hwclk); + + return a9pll_status(bcm_clk, parent_rate); +} + +static const struct clk_ops a9pll_ops = { + .recalc_rate = clk_a9pll_recalc_rate, +}; + +/* + * Get status of any of the ARMPLL output channels + */ +static int a9pll_chan_status(struct brcm_clk *clk, unsigned long parent_rate) +{ + u32 reg; + unsigned div; + + BUG_ON(!clk->regs_base); + + reg = readl(clk->regs_base + IPROC_CLK_ARM_DIV_OFFSET); + pr_debug("Clock Div = %#x\n", reg); + + switch (clk->chan) { + case ARMPLL_APB0_FREE_CLK: + /* apb0_free_div bits 10:8 */ + div = (reg >> CLK_ARM_DIV_APB0_FREE_DIV_SHIFT) & + CLK_ARM_DIV_APB0_FREE_DIV_MASK; + div++; + break; + + case ARMPLL_ARM_SWITCH_CLK: + /* arm_switch_div bits 6:5 */ + div = (reg >> CLK_ARM_DIV_ARM_SWITCH_DIV_SHIFT) & + CLK_ARM_DIV_ARM_SWITCH_DIV_MASK; + div++; + break; + + case ARMPLL_ARM_APB_CLK: + /* IPROC_CLK_APB_SW_DIV_REG apb_clk_div bits 1:0 */ + reg = readl(clk->regs_base + IPROC_CLK_APB_SW_DIV_OFFSET); + div = reg & CLK_APB_SW_DIV_APB_CLK_DIV_MASK; + div++; + break; + + case ARMPLL_ARM_PERIPH_CLK: /* periph_clk */ + div = 2; + break; + + default: + return -EINVAL; + } + + clk->rate = parent_rate / div; + pr_debug("Clock rate A9PLL chan 0x%x: %lu, div: %d\n", + clk->chan, clk->rate, div); + + return clk->rate; +} + +static unsigned long clk_a9pll_chan_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct brcm_clk *bcm_clk = to_brcm_clk(hwclk); + + return a9pll_chan_status(bcm_clk, parent_rate); +} + +static const struct clk_ops a9pll_chan_ops = { + .recalc_rate = clk_a9pll_chan_recalc_rate, +}; + +static __init struct clk *iproc_clock_init(struct device_node *node, + const struct clk_ops *ops) +{ + u32 channel = 0; + struct clk *clk; + struct brcm_clk *brcm_clk; + const char *clk_name = node->name; + const char *parent_name; + struct clk_init_data init; + int rc; + + pr_debug("Clock name %s\n", node->name); + + rc = of_property_read_u32(node, "channel", &channel); + brcm_clk = kzalloc(sizeof(*brcm_clk), GFP_KERNEL); + if (WARN_ON(!brcm_clk)) + return NULL; + + /* Read base address from device tree and map to virtual address. */ + brcm_clk->regs_base = of_iomap(node, 0); + if (WARN_ON(!brcm_clk->regs_base)) + goto err_alloc; + + brcm_clk->chan = channel; + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = ops; + init.flags = 0; + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + brcm_clk->hw.init = &init; + + clk = clk_register(NULL, &brcm_clk->hw); + if (WARN_ON(IS_ERR(clk))) + goto err_unmap; + + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (WARN_ON(IS_ERR_VALUE(rc))) + goto err_unregister; + + rc = clk_register_clkdev(clk, clk_name, NULL); + if (WARN_ON(IS_ERR_VALUE(rc))) + goto err_provider; + + return clk; + +err_provider: + of_clk_del_provider(node); + +err_unregister: + clk_unregister(clk); + +err_unmap: + iounmap(brcm_clk->regs_base); + +err_alloc: + kfree(brcm_clk); + + return NULL; +} + +static void __init iproc_armpll_init(struct device_node *node) +{ + iproc_clock_init(node, &a9pll_ops); +} +CLK_OF_DECLARE(iproc_armpllx, "brcm,iproc-arm-a9pll", iproc_armpll_init); + +static void __init iproc_arm_ch_init(struct device_node *node) +{ + iproc_clock_init(node, &a9pll_chan_ops); +} +CLK_OF_DECLARE(iproc_arm_ch, "brcm,iproc-arm-ch", iproc_arm_ch_init);