@@ -29,18 +29,39 @@
#include "irqchip.h"
+/*
+ * this device provide 4 offsets for each register:
+ * 0x0 - plain read write mode
+ * 0x4 - set mode, OR logic.
+ * 0x8 - clr mode, XOR logic.
+ * 0xc - togle mode.
+ */
+#define SET_REG 4
+#define CLR_REG 8
+
#define HW_ICOLL_VECTOR 0x0000
#define HW_ICOLL_LEVELACK 0x0010
#define HW_ICOLL_CTRL 0x0020
#define HW_ICOLL_STAT_OFFSET 0x0070
-#define HW_ICOLL_INTERRUPTn_SET(n) (0x0124 + (n) * 0x10)
-#define HW_ICOLL_INTERRUPTn_CLR(n) (0x0128 + (n) * 0x10)
-#define BM_ICOLL_INTERRUPTn_ENABLE 0x00000004
+#define HW_ICOLL_INTERRUPT0 0x0120
+#define HW_ICOLL_INTERRUPTn(n) ((n) * 0x10)
+#define BM_ICOLL_INTR_ENABLE BIT(2)
#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 0x1
#define ICOLL_NUM_IRQS 128
-static void __iomem *icoll_base;
+struct icoll_priv {
+ void __iomem *vector;
+ void __iomem *levelack;
+ void __iomem *ctrl;
+ void __iomem *stat;
+ void __iomem *intr;
+ /* number of interrupts per register */
+ int intr_per_reg;
+ void __iomem *clear;
+};
+
+static struct icoll_priv icoll_priv;
static struct irq_domain *icoll_domain;
static void icoll_ack_irq(struct irq_data *d)
@@ -51,19 +72,19 @@ static void icoll_ack_irq(struct irq_data *d)
* BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0 unconditionally.
*/
__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
- icoll_base + HW_ICOLL_LEVELACK);
+ icoll_priv.levelack);
}
static void icoll_mask_irq(struct irq_data *d)
{
- __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_CLR(d->hwirq));
+ __raw_writel(BM_ICOLL_INTR_ENABLE,
+ icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
}
static void icoll_unmask_irq(struct irq_data *d)
{
- __raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
- icoll_base + HW_ICOLL_INTERRUPTn_SET(d->hwirq));
+ __raw_writel(BM_ICOLL_INTR_ENABLE,
+ icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq));
}
static struct irq_chip mxs_icoll_chip = {
@@ -76,8 +97,8 @@ asmlinkage void __exception_irq_entry icoll_handle_irq(struct pt_regs *regs)
{
u32 irqnr;
- irqnr = __raw_readl(icoll_base + HW_ICOLL_STAT_OFFSET);
- __raw_writel(irqnr, icoll_base + HW_ICOLL_VECTOR);
+ irqnr = __raw_readl(icoll_priv.stat);
+ __raw_writel(irqnr, icoll_priv.vector);
handle_domain_irq(icoll_domain, irqnr, regs);
}
@@ -98,14 +119,22 @@ static struct irq_domain_ops icoll_irq_domain_ops = {
static int __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
- icoll_base = of_iomap(np, 0);
+ void __iomem *icoll_base = of_iomap(np, 0);
WARN_ON(!icoll_base);
+ icoll_priv.vector = icoll_base + HW_ICOLL_VECTOR;
+ icoll_priv.levelack = icoll_base + HW_ICOLL_LEVELACK;
+ icoll_priv.ctrl = icoll_base + HW_ICOLL_CTRL;
+ icoll_priv.stat = icoll_base + HW_ICOLL_STAT_OFFSET;
+ icoll_priv.intr = icoll_base + HW_ICOLL_INTERRUPT0;
+ icoll_priv.intr_per_reg = 1;
+ icoll_priv.clear = NULL;
+
/*
* Interrupt Collector reset, which initializes the priority
* for each irq to level 0.
*/
- stmp_reset_block(icoll_base + HW_ICOLL_CTRL);
+ stmp_reset_block(icoll_priv.ctrl);
icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS,
&icoll_irq_domain_ops, NULL);
Some HW has similar functionality but different register offsets. Make sure we can change offsets dynamically. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> --- drivers/irqchip/irq-mxs.c | 55 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 13 deletions(-)