From patchwork Tue Oct 14 08:03:33 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 5078931 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id EA15EC11AC for ; Tue, 14 Oct 2014 08:08:25 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 592D120431 for ; Tue, 14 Oct 2014 08:08:22 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 75EAB202F8 for ; Tue, 14 Oct 2014 08:07:58 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Xdx6b-0005f4-HN; Tue, 14 Oct 2014 08:05:17 +0000 Received: from mout.gmx.net ([212.227.15.18]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Xdx62-0004Ry-P4 for linux-arm-kernel@lists.infradead.org; Tue, 14 Oct 2014 08:04:44 +0000 Received: from zwerg.lan ([80.136.194.212]) by mail.gmx.com (mrgmx002) with ESMTPSA (Nemesis) id 0MgcTf-1XqnVK2XKB-00NypJ; Tue, 14 Oct 2014 10:04:13 +0200 From: Oleksij Rempel To: linux-arm-kernel@lists.infradead.org, tglx@linutronix.de, mturquette@linaro.org, jason@lakedaemon.net, mark.rutland@arm.com, robherring2@gmail.com Subject: [PATCH v5 05/10] ARM: irqchip: mxs: add Alpascale ASM9260 support Date: Tue, 14 Oct 2014 10:03:33 +0200 Message-Id: <1413273818-11811-6-git-send-email-linux@rempel-privat.de> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1413273818-11811-1-git-send-email-linux@rempel-privat.de> References: <1413273818-11811-1-git-send-email-linux@rempel-privat.de> X-Provags-ID: V03:K0:PT0rdPC8SYVzQD8raUtLa4A9AuFTgcZcS44mJgQyw2EiVNrErVP ZaLLcEXOMGuoDLlvpawiDmOiAJ6pZ6LUFp12/IZMhkFWcFYOryjG4H/yGHKnr/lDawyX3hp CZj2M8m7tiHtPEGYNeb10V7kNtrPNjnEag3i2tYAHIuSHyU8GteFzf1awe8j0Yhln3frKWO D2Fceb/+S4nC8aeIsGuQA== X-UI-Out-Filterresults: notjunk:1; X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20141014_010443_175984_C4431013 X-CRM114-Status: GOOD ( 23.08 ) X-Spam-Score: -0.3 (/) Cc: Oleksij Rempel X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.18-1 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_NONE, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. It makes easy to reuse irq-mxs code for ASM9260. Differences between this devices are fallowing: - different register offsets - different count of intterupt lines per register - ASM9260 don't provide reset bit - ASM9260 don't support FIQ. Signed-off-by: Oleksij Rempel --- drivers/irqchip/Kconfig | 5 ++ drivers/irqchip/Makefile | 2 +- drivers/irqchip/alphascale_asm9260-icoll.h | 109 ++++++++++++++++++++++++++++ drivers/irqchip/irq-mxs.c | 112 ++++++++++++++++++++++++++--- 4 files changed, 219 insertions(+), 9 deletions(-) create mode 100644 drivers/irqchip/alphascale_asm9260-icoll.h diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index b8632bf..2ee202f 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -113,3 +113,8 @@ config IRQ_CROSSBAR The primary irqchip invokes the crossbar's callback which inturn allocates a free irq and configures the IP. Thus the peripheral interrupts are routed to one of the free irqchip interrupt lines. + +config IRQ_MXS + bool + select IRQ_DOMAIN + select STMP_DEVICE diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index 73052ba..89c7042 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -4,7 +4,7 @@ obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o obj-$(CONFIG_ARCH_MMP) += irq-mmp.o obj-$(CONFIG_ARCH_MVEBU) += irq-armada-370-xp.o -obj-$(CONFIG_ARCH_MXS) += irq-mxs.o +obj-$(CONFIG_IRQ_MXS) += irq-mxs.o obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o obj-$(CONFIG_METAG) += irq-metag-ext.o diff --git a/drivers/irqchip/alphascale_asm9260-icoll.h b/drivers/irqchip/alphascale_asm9260-icoll.h new file mode 100644 index 0000000..5cec108 --- /dev/null +++ b/drivers/irqchip/alphascale_asm9260-icoll.h @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2014 Oleksij Rempel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _ALPHASCALE_ASM9260_ICOLL_H +#define _ALPHASCALE_ASM9260_ICOLL_H + +#define ASM9260_NUM_IRQS 64 +/* + * this device provide 4 offsets for each register: + * 0x0 - plain read write mode + * 0x4 - set mode, OR logic. + * 0x8 - clr mode, XOR logic. + * 0xc - togle mode. + */ + +#define ASM9260_HW_ICOLL_VECTOR 0x0000 +/* + * bits 31:2 + * This register presents the vector address for the interrupt currently + * active on the CPU IRQ input. Writing to this register notifies the + * interrupt collector that the interrupt service routine for the current + * interrupt has been entered. + * The exception trap should have a LDPC instruction from this address: + * LDPC ASM9260_HW_ICOLL_VECTOR_ADDR; IRQ exception at 0xffff0018 + */ + +/* + * The Interrupt Collector Level Acknowledge Register is used by software to + * indicate the completion of an interrupt on a specific level. + * This register is written at the very end of an interrupt service routine. If + * nesting is used then the CPU irq must be turned on before writing to this + * register to avoid a race condition in the CPU interrupt hardware. + */ +#define ASM9260_HW_ICOLL_LEVELACK 0x0010 +#define ASM9260_BM_LEVELn(nr) BIT(nr) + +#define ASM9260_HW_ICOLL_CTRL 0x0020 +/* + * ASM9260_BM_CTRL_SFTRST and ASM9260_BM_CTRL_CLKGATE are not available on + * asm9260. + */ +#define ASM9260_BM_CTRL_SFTRST BIT(31) +#define ASM9260_BM_CTRL_CLKGATE BIT(30) +/* disable interrupt level nesting */ +#define ASM9260_BM_CTRL_NO_NESTING BIT(19) +/* + * Set this bit to one enable the RISC32-style read side effect associated with + * the vector address register. In this mode, interrupt in-service is signaled + * by the read of the ASM9260_HW_ICOLL_VECTOR register to acquire the interrupt + * vector address. Set this bit to zero for normal operation, in which the ISR + * signals in-service explicitly by means of a write to the + * ASM9260_HW_ICOLL_VECTOR register. + * 0 - Must Write to Vector register to go in-service. + * 1 - Go in-service as a read side effect + */ +#define ASM9260_BM_CTRL_ARM_RSE_MODE BIT(18) +#define ASM9260_BM_CTRL_IRQ_ENABLE BIT(16) + +#define ASM9260_HW_ICOLL_STAT_OFFSET 0x0030 +/* + * bits 5:0 + * Vector number of current interrupt. Multiply by 4 and add to vector base + * address to obtain the value in ASM9260_HW_ICOLL_VECTOR. + */ + +/* + * RAW0 and RAW1 provides a read-only view of the raw interrupt request lines + * coming from various parts of the chip. Its purpose is to improve diagnostic + * observability. + */ +#define ASM9260_HW_ICOLL_RAW0 0x0040 +#define ASM9260_HW_ICOLL_RAW1 0x0050 + +#define ASM9260_HW_ICOLL_INTERRUPT0 0x0060 +#define ASM9260_HW_ICOLL_INTERRUPTn(n) (0x0060 + ((n) >> 2) * 0x10) +/* + * WARNING: Modifying the priority of an enabled interrupt may result in + * undefined behavior. + */ +#define ASM9260_BM_INT_PRIORITY_MASK 0x3 +#define ASM9260_BM_INT_ENABLE BIT(2) +#define ASM9260_BM_INT_SOFTIRQ BIT(3) + +#define ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n) (((n) & 0x3) << 3) +#define ASM9260_BM_ICOLL_INTERRUPTn_ENABLE(n) (1 << (2 + \ + ASM9260_BM_ICOLL_INTERRUPTn_SHIFT(n))) + +#define ASM9260_HW_ICOLL_VBASE 0x0160 +/* + * bits 31:2 + * This bitfield holds the upper 30 bits of the base address of the vector + * table. + */ + +#define ASM9260_HW_ICOLL_CLEAR0 0x01d0 +#define ASM9260_HW_ICOLL_CLEAR1 0x01e0 +#define ASM9260_HW_ICOLL_CLEARn(n) (((n >> 5) * 0x10) \ + + SET_REG) +#define ASM9260_BM_CLEAR_BIT(n) BIT(n & 0x1f) + +/* Scratchpad */ +#define ASM9260_HW_ICOLL_UNDEF_VECTOR 0x01f0 +#endif diff --git a/drivers/irqchip/irq-mxs.c b/drivers/irqchip/irq-mxs.c index 681125d..8397c73 100644 --- a/drivers/irqchip/irq-mxs.c +++ b/drivers/irqchip/irq-mxs.c @@ -1,5 +1,7 @@ /* * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2014 Oleksij Rempel + * Add Alphascale ASM9260 support. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,6 +30,7 @@ #include #include "irqchip.h" +#include "alphascale_asm9260-icoll.h" /* * this device provide 4 offsets for each register: @@ -63,6 +66,33 @@ struct icoll_priv { static struct icoll_priv icoll_priv; static struct irq_domain *icoll_domain; +static DEFINE_MUTEX(icoll_lock); + +/* calculate bit offset depending on number of intterupt per register */ +static u32 icoll_intr_bitshift(struct irq_data *d, u32 bit) +{ + /* + * We expect intr_per_reg to be 4 or 1, it means + * "n" will be 3 or 0. + */ + int n = icoll_priv.intr_per_reg - 1; + + /* + * If n = 0, "bit" is never shifted. + * If n = 3, mask lower part of hwirq to convert it + * in 0, 1, 2 or 3 and then multiply it by 8 (or shift by 3) + */ + return bit << ((d->hwirq & n) << n); +} + +/* calculate mem offset depending on number of intterupt per register */ +static void __iomem *icoll_intr_reg(struct irq_data *d) +{ + int n = icoll_priv.intr_per_reg >> 1; + + /* offset = hwirq / intr_per_reg * 0x10 */ + return icoll_priv.intr + ((d->hwirq >> n) * 0x10); +} static void icoll_ack_irq(struct irq_data *d) { @@ -77,14 +107,21 @@ static void icoll_ack_irq(struct irq_data *d) static void icoll_mask_irq(struct irq_data *d) { - __raw_writel(BM_ICOLL_INTR_ENABLE, - icoll_priv.intr + CLR_REG + HW_ICOLL_INTERRUPTn(d->hwirq)); + __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE), + icoll_intr_reg(d) + CLR_REG); } static void icoll_unmask_irq(struct irq_data *d) { - __raw_writel(BM_ICOLL_INTR_ENABLE, - icoll_priv.intr + SET_REG + HW_ICOLL_INTERRUPTn(d->hwirq)); + mutex_lock(&icoll_lock); + if (icoll_priv.clear) + __raw_writel(ASM9260_BM_CLEAR_BIT(d->hwirq), + icoll_priv.clear + + ASM9260_HW_ICOLL_CLEARn(d->hwirq)); + + __raw_writel(icoll_intr_bitshift(d, BM_ICOLL_INTR_ENABLE), + icoll_intr_reg(d) + SET_REG); + mutex_unlock(&icoll_lock); } static struct irq_chip mxs_icoll_chip = { @@ -116,12 +153,41 @@ static struct irq_domain_ops icoll_irq_domain_ops = { .xlate = irq_domain_xlate_onecell, }; +static void __init icoll_add_domain(struct device_node *np, + int num) +{ + icoll_domain = irq_domain_add_linear(np, num, + &icoll_irq_domain_ops, NULL); + + if (!icoll_domain) + panic("%s: unable add irq domain", np->full_name); + irq_set_default_host(icoll_domain); + set_handle_irq(icoll_handle_irq); +} + +static void __iomem * __init icoll_init_iobase(struct device_node *np) +{ + struct resource res; + void __iomem *icoll_base; + + if (of_address_to_resource(np, 0, &res)) + panic("%s: unable to get resource", np->full_name); + + if (!request_mem_region(res.start, resource_size(&res), np->name)) + panic("%s: unable to request mem region", np->full_name); + + icoll_base = ioremap_nocache(res.start, resource_size(&res)); + if (!icoll_base) + panic("%s: unable to map resource", np->full_name); + return icoll_base; +} + static int __init icoll_of_init(struct device_node *np, struct device_node *interrupt_parent) { - void __iomem *icoll_base = of_iomap(np, 0); - WARN_ON(!icoll_base); + void __iomem *icoll_base; + icoll_base = icoll_init_iobase(np); icoll_priv.vector = icoll_base + HW_ICOLL_VECTOR; icoll_priv.levelack = icoll_base + HW_ICOLL_LEVELACK; icoll_priv.ctrl = icoll_base + HW_ICOLL_CTRL; @@ -136,8 +202,38 @@ static int __init icoll_of_init(struct device_node *np, */ stmp_reset_block(icoll_priv.ctrl); - icoll_domain = irq_domain_add_linear(np, ICOLL_NUM_IRQS, - &icoll_irq_domain_ops, NULL); + icoll_add_domain(np, ICOLL_NUM_IRQS); + return icoll_domain ? 0 : -ENODEV; } IRQCHIP_DECLARE(mxs, "fsl,icoll", icoll_of_init); + +static int __init asm9260_of_init(struct device_node *np, + struct device_node *interrupt_parent) +{ + void __iomem *icoll_base; + int i; + + icoll_base = icoll_init_iobase(np); + icoll_priv.vector = icoll_base + ASM9260_HW_ICOLL_VECTOR; + icoll_priv.levelack = icoll_base + ASM9260_HW_ICOLL_LEVELACK; + icoll_priv.ctrl = icoll_base + ASM9260_HW_ICOLL_CTRL; + icoll_priv.stat = icoll_base + ASM9260_HW_ICOLL_STAT_OFFSET; + icoll_priv.intr = icoll_base + ASM9260_HW_ICOLL_INTERRUPT0; + icoll_priv.intr_per_reg = 4; + icoll_priv.clear = icoll_base + ASM9260_HW_ICOLL_CLEAR0; + + writel_relaxed(ASM9260_BM_CTRL_IRQ_ENABLE, + icoll_priv.ctrl); + /* + * ASM9260 don't provide reset bit. So, we need to set level 0 + * manually. + */ + for (i = 0; i < 16 * 0x10; i += 0x10) + writel(0, icoll_priv.intr + i); + + icoll_add_domain(np, ASM9260_NUM_IRQS); + + return icoll_domain ? 0 : -ENODEV; +} +IRQCHIP_DECLARE(asm9260, "alphascale,asm9260-icoll", asm9260_of_init);