| Message ID | 1413466301-25952-5-git-send-email-caesar.wang@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Caesar, On Thu, Oct 16, 2014 at 09:31:40PM +0800, Caesar Wang wrote: > This patch is depend on rk3288-thermal.dtsi,or > it will compile error. > > If the temperature over a period of time High,over 120C > the resulting TSHUT gave CRU module,let it reset > the entire chip,or via GPIO give PMIC. > > Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> > --- > arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi > index cb18bb4..bf34111 100644 > --- a/arch/arm/boot/dts/rk3288.dtsi > +++ b/arch/arm/boot/dts/rk3288.dtsi > @@ -15,6 +15,7 @@ > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/pinctrl/rockchip.h> > #include <dt-bindings/clock/rk3288-cru.h> > +#include <dt-bindings/thermal/thermal.h> > #include "skeleton.dtsi" > > / { > @@ -346,6 +347,19 @@ > status = "disabled"; > }; > > + tsadc: tsadc@ff280000 { > + compatible = "rockchip,rk3288-tsadc"; > + reg = <0xff280000 0x100>; > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; > + clock-names = "tsadc", "apb_pclk"; > + pinctrl-names = "default"; > + pinctrl-0 = <&otp_out>; > + #thermal-sensor-cells = <1>; > + hw-shut-temp = <120000>; > + status = "disabled" It looks like you are missing semicolon here. > + }; > + > usb_host0_ehci: usb@ff500000 { > compatible = "generic-ehci"; > reg = <0xff500000 0x100>; > @@ -965,6 +979,12 @@ > }; > }; > > + tsadc { > + otp_out: otp-out { > + rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; > + }; > + }; > + > pwm0 { > pwm0_pin: pwm0-pin { > rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>; > -- > 1.9.1 > >
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index cb18bb4..bf34111 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3288-cru.h> +#include <dt-bindings/thermal/thermal.h> #include "skeleton.dtsi" / { @@ -346,6 +347,19 @@ status = "disabled"; }; + tsadc: tsadc@ff280000 { + compatible = "rockchip,rk3288-tsadc"; + reg = <0xff280000 0x100>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&otp_out>; + #thermal-sensor-cells = <1>; + hw-shut-temp = <120000>; + status = "disabled" + }; + usb_host0_ehci: usb@ff500000 { compatible = "generic-ehci"; reg = <0xff500000 0x100>; @@ -965,6 +979,12 @@ }; }; + tsadc { + otp_out: otp-out { + rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
This patch is depend on rk3288-thermal.dtsi,or it will compile error. If the temperature over a period of time High,over 120C the resulting TSHUT gave CRU module,let it reset the entire chip,or via GPIO give PMIC. Signed-off-by: Caesar Wang <caesar.wang@rock-chips.com> --- arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)