| Message ID | 1413732164-19545-1-git-send-email-msalter@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Mark, On Sun, Oct 19, 2014 at 04:22:44PM +0100, Mark Salter wrote: > Arm allows for two possible architectural clock sources. One memory mapped > and the other coprocessor based. If both timers exist, then the driver waits > for both to be probed before registering a clocksource. > > Commit c387f07e6205 ("clocksource: arm_arch_timer: Discard unavailable timers > correctly") attempted to fix a hang occurring when one of the two possible > timers had a device node, but was disabled. In that case, the second probe > would never occur and the system would hang without a clocksource being > registered. > > Unfortunately, incorrect logic in that commit made things worse such that > a hang would occur unless both timers had a device node and were enabled. > This patch fixes the logic so that we don't wait to probe a second timer > unless it exists and is enabled. > > Signed-off-by: Mark Salter <msalter@redhat.com> Marc Zyngier had a similar fix for this issue a few days ago [1]. > --- > drivers/clocksource/arm_arch_timer.c | 11 ++++++----- > 1 file changed, 6 insertions(+), 5 deletions(-) > > diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c > index d1a5e35..b73392b 100644 > --- a/drivers/clocksource/arm_arch_timer.c > +++ b/drivers/clocksource/arm_arch_timer.c > @@ -666,13 +666,14 @@ static bool __init > arch_timer_probed(int type, const struct of_device_id *matches) > { > struct device_node *dn; > - bool probed = false; > + bool probed = true; > > dn = of_find_matching_node(NULL, matches); > - if (dn && of_device_is_available(dn) && (arch_timers_present & type)) > - probed = true; > - of_node_put(dn); > - > + if (dn) { > + if (of_device_is_available(dn) && !(arch_timers_present & type)) > + probed = false; > + of_node_put(dn); > + } Other than the addition of the NULL check, this looks identical to Marc's fix. There's already a NULL check in of_device_is_available, so I don't think it's necessary to add one here. Are you seeing some failure with a NULL np? Thanks, Mark. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/294744.html
On Sun, 2014-10-19 at 20:40 +0100, Mark Rutland wrote: > Hi Mark, > > On Sun, Oct 19, 2014 at 04:22:44PM +0100, Mark Salter wrote: > > Arm allows for two possible architectural clock sources. One memory mapped > > and the other coprocessor based. If both timers exist, then the driver waits > > for both to be probed before registering a clocksource. > > > > Commit c387f07e6205 ("clocksource: arm_arch_timer: Discard unavailable timers > > correctly") attempted to fix a hang occurring when one of the two possible > > timers had a device node, but was disabled. In that case, the second probe > > would never occur and the system would hang without a clocksource being > > registered. > > > > Unfortunately, incorrect logic in that commit made things worse such that > > a hang would occur unless both timers had a device node and were enabled. > > This patch fixes the logic so that we don't wait to probe a second timer > > unless it exists and is enabled. > > > > Signed-off-by: Mark Salter <msalter@redhat.com> > > Marc Zyngier had a similar fix for this issue a few days ago [1]. > > > --- > > drivers/clocksource/arm_arch_timer.c | 11 ++++++----- > > 1 file changed, 6 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c > > index d1a5e35..b73392b 100644 > > --- a/drivers/clocksource/arm_arch_timer.c > > +++ b/drivers/clocksource/arm_arch_timer.c > > @@ -666,13 +666,14 @@ static bool __init > > arch_timer_probed(int type, const struct of_device_id *matches) > > { > > struct device_node *dn; > > - bool probed = false; > > + bool probed = true; > > > > dn = of_find_matching_node(NULL, matches); > > - if (dn && of_device_is_available(dn) && (arch_timers_present & type)) > > - probed = true; > > - of_node_put(dn); > > - > > + if (dn) { > > + if (of_device_is_available(dn) && !(arch_timers_present & type)) > > + probed = false; > > + of_node_put(dn); > > + } > > Other than the addition of the NULL check, this looks identical to > Marc's fix. There's already a NULL check in of_device_is_available, so I > don't think it's necessary to add one here. Are you seeing some failure > with a NULL np? No. It just looked weird to do the of_node_put unconditionally even though of_node_put does check for NULL also. > > Thanks, > Mark. > > [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-October/294744.html > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index d1a5e35..b73392b 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -666,13 +666,14 @@ static bool __init arch_timer_probed(int type, const struct of_device_id *matches) { struct device_node *dn; - bool probed = false; + bool probed = true; dn = of_find_matching_node(NULL, matches); - if (dn && of_device_is_available(dn) && (arch_timers_present & type)) - probed = true; - of_node_put(dn); - + if (dn) { + if (of_device_is_available(dn) && !(arch_timers_present & type)) + probed = false; + of_node_put(dn); + } return probed; }
Arm allows for two possible architectural clock sources. One memory mapped and the other coprocessor based. If both timers exist, then the driver waits for both to be probed before registering a clocksource. Commit c387f07e6205 ("clocksource: arm_arch_timer: Discard unavailable timers correctly") attempted to fix a hang occurring when one of the two possible timers had a device node, but was disabled. In that case, the second probe would never occur and the system would hang without a clocksource being registered. Unfortunately, incorrect logic in that commit made things worse such that a hang would occur unless both timers had a device node and were enabled. This patch fixes the logic so that we don't wait to probe a second timer unless it exists and is enabled. Signed-off-by: Mark Salter <msalter@redhat.com> --- drivers/clocksource/arm_arch_timer.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)