diff mbox

[v2,4/4] ARM: dts: exynos4412-trats: Add suspend configuration for max77686 regulators

Message ID 1413890597-31037-5-git-send-email-k.kozlowski@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Krzysztof Kozlowski Oct. 21, 2014, 11:23 a.m. UTC
Add suspend to RAM configuration for max77686 regulators. Some LDOs and
bucks are disabled. This reduces energy consumption during S2R,
approximately from 17 mA to 9 mA.

Additionally remove old and not supported bindings:
 - regulator-mem-off
 - regulator-mem-idle
 - regulator-mem-on
The max77686 driver does not parse them and they are not documented
anywere.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
 1 file changed, 42 insertions(+), 30 deletions(-)

Comments

Javier Martinez Canillas Oct. 21, 2014, 12:04 p.m. UTC | #1
Hello Krzysztof,

On 10/21/2014 01:23 PM, Krzysztof Kozlowski wrote:
> Add suspend to RAM configuration for max77686 regulators. Some LDOs and
> bucks are disabled. This reduces energy consumption during S2R,
> approximately from 17 mA to 9 mA.
> 
> Additionally remove old and not supported bindings:
>  - regulator-mem-off
>  - regulator-mem-idle
>  - regulator-mem-on
> The max77686 driver does not parse them and they are not documented
> anywere.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
>  arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
>  1 file changed, 42 insertions(+), 30 deletions(-)
> 

I'm not familiar with the board but the change looks good to me assuming each
regulator is doing the right thing.

I already gave you my Reviewed-by for the previous version but was not carried:

Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Best regards,
Javier
Krzysztof Kozlowski Oct. 21, 2014, 12:24 p.m. UTC | #2
On wto, 2014-10-21 at 14:04 +0200, Javier Martinez Canillas wrote:
> Hello Krzysztof,
> 
> On 10/21/2014 01:23 PM, Krzysztof Kozlowski wrote:
> > Add suspend to RAM configuration for max77686 regulators. Some LDOs and
> > bucks are disabled. This reduces energy consumption during S2R,
> > approximately from 17 mA to 9 mA.
> > 
> > Additionally remove old and not supported bindings:
> >  - regulator-mem-off
> >  - regulator-mem-idle
> >  - regulator-mem-on
> > The max77686 driver does not parse them and they are not documented
> > anywere.
> > 
> > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> > ---
> >  arch/arm/boot/dts/exynos4412-trats2.dts | 72 +++++++++++++++++++--------------
> >  1 file changed, 42 insertions(+), 30 deletions(-)
> > 
> 
> I'm not familiar with the board but the change looks good to me assuming each
> regulator is doing the right thing.
> 
> I already gave you my Reviewed-by for the previous version but was not carried:
> 
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

Thanks! I didn't add your review-by-tag because changes in the patch.

Best regards,
Krzysztof


> 
> Best regards,
> Javier
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index dd9ac66770f7..8067eb447829 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -225,7 +225,6 @@ 
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo2_reg: ldo2 {
@@ -234,7 +233,9 @@ 
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo3_reg: ldo3 {
@@ -243,7 +244,6 @@ 
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo4_reg: ldo4 {
@@ -252,7 +252,6 @@ 
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo5_reg: ldo5 {
@@ -261,7 +260,6 @@ 
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 					regulator-always-on;
-					regulator-mem-on;
 				};
 
 				ldo6_reg: ldo6 {
@@ -270,7 +268,9 @@ 
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo7_reg: ldo7 {
@@ -279,7 +279,9 @@ 
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
 					regulator-always-on;
-					regulator-mem-on;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo8_reg: ldo8 {
@@ -287,7 +289,9 @@ 
 					regulator-name = "VMIPI_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo9_reg: ldo9 {
@@ -295,7 +299,6 @@ 
 					regulator-name = "CAM_ISP_MIPI_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo10_reg: ldo10 {
@@ -303,7 +306,9 @@ 
 					regulator-name = "VMIPI_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo11_reg: ldo11 {
@@ -312,7 +317,9 @@ 
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo12_reg: ldo12 {
@@ -320,7 +327,9 @@ 
 					regulator-name = "VUOTG_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo13_reg: ldo13 {
@@ -328,7 +337,6 @@ 
 					regulator-name = "NFC_AVDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo14_reg: ldo14 {
@@ -337,7 +345,9 @@ 
 					regulator-min-microvolt = <1950000>;
 					regulator-max-microvolt = <1950000>;
 					regulator-always-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				ldo15_reg: ldo15 {
@@ -345,7 +355,9 @@ 
 					regulator-name = "VHSIC_1.0V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo16_reg: ldo16 {
@@ -353,7 +365,9 @@ 
 					regulator-name = "VHSIC_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				ldo17_reg: ldo17 {
@@ -361,7 +375,6 @@ 
 					regulator-name = "CAM_SENSOR_CORE_1.2V";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-idle;
 				};
 
 				ldo18_reg: ldo18 {
@@ -369,7 +382,6 @@ 
 					regulator-name = "CAM_ISP_SEN_IO_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo19_reg: ldo19 {
@@ -377,7 +389,6 @@ 
 					regulator-name = "VT_CAM_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo20_reg: ldo20 {
@@ -385,7 +396,6 @@ 
 					regulator-name = "VDDQ_PRE_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo21_reg: ldo21 {
@@ -393,7 +403,6 @@ 
 					regulator-name = "VTF_2.8V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
 				};
 
 				ldo22_reg: ldo22 {
@@ -408,7 +417,6 @@ 
 					regulator-name = "TSP_AVDD_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-mem-idle;
 				};
 
 				ldo24_reg: ldo24 {
@@ -416,7 +424,6 @@ 
 					regulator-name = "TSP_VDD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					regulator-mem-idle;
 				};
 
 				ldo25_reg: ldo25 {
@@ -424,7 +431,6 @@ 
 					regulator-name = "LCD_VCC_3.3V";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
-					regulator-mem-idle;
 				};
 
 				ldo26_reg: ldo26 {
@@ -432,7 +438,6 @@ 
 					regulator-name = "MOTOR_VCC_3.0V";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					regulator-mem-idle;
 				};
 
 				buck1_reg: buck1 {
@@ -442,7 +447,9 @@ 
 					regulator-max-microvolt = <1100000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck2_reg: buck2 {
@@ -452,7 +459,9 @@ 
 					regulator-max-microvolt = <1500000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-on-in-suspend;
+					};
 				};
 
 				buck3_reg: buck3 {
@@ -462,7 +471,9 @@ 
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck4_reg: buck4 {
@@ -471,7 +482,9 @@ 
 					regulator-min-microvolt = <850000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-boot-on;
-					regulator-mem-off;
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
 				};
 
 				buck5_reg: buck5 {
@@ -510,7 +523,6 @@ 
 					regulator-name = "CAM_ISP_CORE_1.2V";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1200000>;
-					regulator-mem-off;
 				};
 			};
 		};