diff mbox

[v2,1/4] ARM: dts: rockchip: Add devicetree source for MarsBoard RK3066

Message ID 1414499062-23875-1-git-send-email-romain.perier@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Romain Perier Oct. 28, 2014, 12:24 p.m. UTC
Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
Changes since v1:
  - Replaced hoayuelectronics by hoayu as suggested by the vendor-prefix doc in dt-bindings

 arch/arm/boot/dts/Makefile              |   1 +
 arch/arm/boot/dts/rk3066a-marsboard.dts | 143 ++++++++++++++++++++++++++++++++
 2 files changed, 144 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3066a-marsboard.dts

Comments

Heiko Stuebner Oct. 30, 2014, 7:54 p.m. UTC | #1
Am Dienstag, 28. Oktober 2014, 12:24:19 schrieb Romain Perier:
> Signed-off-by: Romain Perier <romain.perier@gmail.com>
> ---
> Changes since v1:
>   - Replaced hoayuelectronics by hoayu as suggested by the vendor-prefix doc
> in dt-bindings
> 
>  arch/arm/boot/dts/Makefile              |   1 +
>  arch/arm/boot/dts/rk3066a-marsboard.dts | 143
> ++++++++++++++++++++++++++++++++ 2 files changed, 144 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk3066a-marsboard.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 742ffa2..af527a2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -365,6 +365,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>  	qcom-msm8960-cdp.dtb \
>  	qcom-msm8974-sony-xperia-honami.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += \
> +	rk3066a-marsboard.dtb \
>  	rk3066a-bqcurie2.dtb \
>  	rk3188-radxarock.dtb \
>  	rk3288-evb-act8846.dtb \
> diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts
> b/arch/arm/boot/dts/rk3066a-marsboard.dts new file mode 100644
> index 0000000..146bd61
> --- /dev/null
> +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
> @@ -0,0 +1,143 @@
> +/*
> + * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */

Please license the file under both GPLv2 and X11 like

/*
 * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This file is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This file is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 *     You should have received a copy of the GNU General Public
 *     License along with this file; if not, write to the Free
 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 *     MA 02110-1301 USA
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

For context see
https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?id=b0946ca329eaaa42ecd36207c55aa2bd4925f133


I'll try to get the existing files relicensed in the next time, but would like 
new files to use a better licensing from the start.


> +
> +/dts-v1/;
> +#include "rk3066a.dtsi"
> +
> +/ {
> +	model = "MarsBoard RK3066";
> +	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
> +
> +	memory {
> +		reg = <0x60000000 0x40000000>;
> +	};
> +
> +	vcc_sd0: fixed-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "sdmmc-supply";
> +		regulator-min-microvolt = <3000000>;
> +		regulator-max-microvolt = <3000000>;
> +		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
> +		startup-delay-us = <100000>;
> +		vin-supply = <&vcc_io>;
> +	};
> +};
> +
> +
> +

unnecessary blank lines - only one please


> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	tps: tps@2d {
> +		reg = <0x2d>;
> +
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> +
> +		vcc5-supply = <&vcc_io>;
> +		vcc6-supply = <&vcc_io>;
> +
> +		regulators {
> +			vcc_rtc: regulator@0 {
> +				regulator-name = "vcc_rtc";
> +				regulator-always-on;
> +			};
> +
> +			vcc_io: regulator@1 {
> +				regulator-name = "vcc_io";
> +				regulator-always-on;
> +			};
> +
> +			vdd_arm: regulator@2 {
> +				regulator-name = "vdd_arm";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vcc_ddr: regulator@3 {
> +				regulator-name = "vcc_ddr";
> +				regulator-min-microvolt = <600000>;
> +				regulator-max-microvolt = <1500000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vcc18_cif: regulator@5 {
> +				regulator-name = "vcc18_cif";
> +				regulator-always-on;
> +			};
> +
> +			vdd_11: regulator@6 {
> +				regulator-name = "vdd_11";
> +				regulator-always-on;
> +			};
> +
> +			vcc_25: regulator@7 {
> +				regulator-name = "vcc_25";
> +				regulator-always-on;
> +			};
> +
> +			vcc_18: regulator@8 {
> +				regulator-name = "vcc_18";
> +				regulator-always-on;
> +			};
> +
> +			vcc25_hdmi: regulator@9 {
> +				regulator-name = "vcc25_hdmi";
> +				regulator-always-on;
> +			};
> +
> +			vcca_33: regulator@10 {
> +				regulator-name = "vcca_33";
> +				regulator-always-on;
> +			};
> +
> +			vcc_tp: regulator@11 {
> +				regulator-name = "vcc_tp";
> +				regulator-always-on;
> +			};

this is the rmii regulator and the schematics for the marsboard name it 
"vcc_rmii" so both the phandle and the regulator-name should reflect that.

> +
> +			vcc28_cif: regulator@12 {
> +				regulator-name = "vcc28_cif";
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +/* must be included after &tps gets defined */
> +#include "tps65910.dtsi"
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	status = "okay";
> +};
> +
> +&uart3 {
> +	status = "okay";
> +};
> +
> +&wdt {
> +	status = "okay";
> +};
diff mbox

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 742ffa2..af527a2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -365,6 +365,7 @@  dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3066a-marsboard.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3188-radxarock.dtb \
 	rk3288-evb-act8846.dtb \
diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts
new file mode 100644
index 0000000..146bd61
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a-marsboard.dts
@@ -0,0 +1,143 @@ 
+/*
+ * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+	model = "MarsBoard RK3066";
+	compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
+	memory {
+		reg = <0x60000000 0x40000000>;
+	};
+
+	vcc_sd0: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_tp: regulator@11 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};