| Message ID | 1415281862-23764-2-git-send-email-grygorii.strashko@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Nov 06, 2014 at 03:51:00PM +0200, Grygorii Strashko wrote: > From: Geert Uytterhoeven <geert+renesas@glider.be> > > The existing pm_clk_add() allows to pass a clock by con_id. However, > when referring to a specific clock from DT, no con_id is available. > > Add pm_clk_add_clk(), which allows to specify the struct clk * directly. > The will will increment refcount on clock pointer, so the caller has > to use clk_put() on clock pointer when done. > > CC: Ulf Hansson <ulf.hansson@linaro.org> > CC: Geert Uytterhoeven <geert@linux-m68k.org> > CC: Dmitry Torokhov <dmitry.torokhov@gmail.com> > Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> > Reviewed-by: Kevin Hilman <khilman@linaro.org> > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > drivers/base/power/clock_ops.c | 47 +++++++++++++++++++++++++++++++++--------- > include/linux/pm_clock.h | 8 +++++++ > 2 files changed, 45 insertions(+), 10 deletions(-) > > diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c > index 7836930..f061eaa 100644 > --- a/drivers/base/power/clock_ops.c > +++ b/drivers/base/power/clock_ops.c > @@ -12,6 +12,7 @@ > #include <linux/pm.h> > #include <linux/pm_clock.h> > #include <linux/clk.h> > +#include <linux/clkdev.h> > #include <linux/slab.h> > #include <linux/err.h> > > @@ -53,7 +54,8 @@ static inline int __pm_clk_enable(struct device *dev, struct clk *clk) > */ > static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) > { > - ce->clk = clk_get(dev, ce->con_id); > + if (!ce->clk) > + ce->clk = clk_get(dev, ce->con_id); > if (IS_ERR(ce->clk)) { > ce->status = PCE_STATUS_ERROR; > } else { > @@ -63,15 +65,8 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) > } > } > > -/** > - * pm_clk_add - Start using a device clock for power management. > - * @dev: Device whose clock is going to be used for power management. > - * @con_id: Connection ID of the clock. > - * > - * Add the clock represented by @con_id to the list of clocks used for > - * the power management of @dev. > - */ > -int pm_clk_add(struct device *dev, const char *con_id) > +static int __pm_clk_add(struct device *dev, const char *con_id, > + struct clk *clk) > { > struct pm_subsys_data *psd = dev_to_psd(dev); > struct pm_clock_entry *ce; > @@ -93,6 +88,12 @@ int pm_clk_add(struct device *dev, const char *con_id) > kfree(ce); > return -ENOMEM; > } > + } else { > + if (IS_ERR(ce->clk) || !__clk_get(clk)) { > + kfree(ce); > + return -ENOENT; > + } > + ce->clk = clk; > } > > pm_clk_acquire(dev, ce); > @@ -104,6 +105,32 @@ int pm_clk_add(struct device *dev, const char *con_id) > } > > /** > + * pm_clk_add - Start using a device clock for power management. > + * @dev: Device whose clock is going to be used for power management. > + * @con_id: Connection ID of the clock. > + * > + * Add the clock represented by @con_id to the list of clocks used for > + * the power management of @dev. > + */ > +int pm_clk_add(struct device *dev, const char *con_id) > +{ > + return __pm_clk_add(dev, con_id, NULL); > +} > + > +/** > + * pm_clk_add_clk - Start using a device clock for power management. > + * @dev: Device whose clock is going to be used for power management. > + * @clk: Clock pointer > + * > + * Add the clock to the list of clocks used for the power management of @dev. > + * It will increment refcount on clock pointer, use clk_put() on it when done. > + */ > +int pm_clk_add_clk(struct device *dev, struct clk *clk) > +{ > + return __pm_clk_add(dev, NULL, clk); > +} > + > +/** > * __pm_clk_remove - Destroy PM clock entry. > * @ce: PM clock entry to destroy. > */ > diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h > index 8348866..0b00396 100644 > --- a/include/linux/pm_clock.h > +++ b/include/linux/pm_clock.h > @@ -18,6 +18,8 @@ struct pm_clk_notifier_block { > char *con_ids[]; > }; > > +struct clk; > + > #ifdef CONFIG_PM_CLK > static inline bool pm_clk_no_clocks(struct device *dev) > { > @@ -29,6 +31,7 @@ extern void pm_clk_init(struct device *dev); > extern int pm_clk_create(struct device *dev); > extern void pm_clk_destroy(struct device *dev); > extern int pm_clk_add(struct device *dev, const char *con_id); > +extern int pm_clk_add_clk(struct device *dev, struct clk *clk); > extern void pm_clk_remove(struct device *dev, const char *con_id); > extern int pm_clk_suspend(struct device *dev); > extern int pm_clk_resume(struct device *dev); > @@ -51,6 +54,11 @@ static inline int pm_clk_add(struct device *dev, const char *con_id) > { > return -EINVAL; > } > + > +static inline int pm_clk_add_clk(struct device *dev, struct clk *clk) > +{ > + return -EINVAL; > +} > static inline void pm_clk_remove(struct device *dev, const char *con_id) > { > } > -- > 1.9.1 >
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 7836930..f061eaa 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -12,6 +12,7 @@ #include <linux/pm.h> #include <linux/pm_clock.h> #include <linux/clk.h> +#include <linux/clkdev.h> #include <linux/slab.h> #include <linux/err.h> @@ -53,7 +54,8 @@ static inline int __pm_clk_enable(struct device *dev, struct clk *clk) */ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) { - ce->clk = clk_get(dev, ce->con_id); + if (!ce->clk) + ce->clk = clk_get(dev, ce->con_id); if (IS_ERR(ce->clk)) { ce->status = PCE_STATUS_ERROR; } else { @@ -63,15 +65,8 @@ static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) } } -/** - * pm_clk_add - Start using a device clock for power management. - * @dev: Device whose clock is going to be used for power management. - * @con_id: Connection ID of the clock. - * - * Add the clock represented by @con_id to the list of clocks used for - * the power management of @dev. - */ -int pm_clk_add(struct device *dev, const char *con_id) +static int __pm_clk_add(struct device *dev, const char *con_id, + struct clk *clk) { struct pm_subsys_data *psd = dev_to_psd(dev); struct pm_clock_entry *ce; @@ -93,6 +88,12 @@ int pm_clk_add(struct device *dev, const char *con_id) kfree(ce); return -ENOMEM; } + } else { + if (IS_ERR(ce->clk) || !__clk_get(clk)) { + kfree(ce); + return -ENOENT; + } + ce->clk = clk; } pm_clk_acquire(dev, ce); @@ -104,6 +105,32 @@ int pm_clk_add(struct device *dev, const char *con_id) } /** + * pm_clk_add - Start using a device clock for power management. + * @dev: Device whose clock is going to be used for power management. + * @con_id: Connection ID of the clock. + * + * Add the clock represented by @con_id to the list of clocks used for + * the power management of @dev. + */ +int pm_clk_add(struct device *dev, const char *con_id) +{ + return __pm_clk_add(dev, con_id, NULL); +} + +/** + * pm_clk_add_clk - Start using a device clock for power management. + * @dev: Device whose clock is going to be used for power management. + * @clk: Clock pointer + * + * Add the clock to the list of clocks used for the power management of @dev. + * It will increment refcount on clock pointer, use clk_put() on it when done. + */ +int pm_clk_add_clk(struct device *dev, struct clk *clk) +{ + return __pm_clk_add(dev, NULL, clk); +} + +/** * __pm_clk_remove - Destroy PM clock entry. * @ce: PM clock entry to destroy. */ diff --git a/include/linux/pm_clock.h b/include/linux/pm_clock.h index 8348866..0b00396 100644 --- a/include/linux/pm_clock.h +++ b/include/linux/pm_clock.h @@ -18,6 +18,8 @@ struct pm_clk_notifier_block { char *con_ids[]; }; +struct clk; + #ifdef CONFIG_PM_CLK static inline bool pm_clk_no_clocks(struct device *dev) { @@ -29,6 +31,7 @@ extern void pm_clk_init(struct device *dev); extern int pm_clk_create(struct device *dev); extern void pm_clk_destroy(struct device *dev); extern int pm_clk_add(struct device *dev, const char *con_id); +extern int pm_clk_add_clk(struct device *dev, struct clk *clk); extern void pm_clk_remove(struct device *dev, const char *con_id); extern int pm_clk_suspend(struct device *dev); extern int pm_clk_resume(struct device *dev); @@ -51,6 +54,11 @@ static inline int pm_clk_add(struct device *dev, const char *con_id) { return -EINVAL; } + +static inline int pm_clk_add_clk(struct device *dev, struct clk *clk) +{ + return -EINVAL; +} static inline void pm_clk_remove(struct device *dev, const char *con_id) { }