| Message ID | 1415616205-21255-1-git-send-email-Minghuan.Lian@freescale.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Montag, den 10.11.2014, 18:43 +0800 schrieb Minghuan Lian: > Currently, pcie-designware.c only supports two ATUs, ATU0 is used > for CFG0 and MEM, ATU1 is used for CFG1 and IO. There is a conflict > when MEM and CFG0 are accessed simultaneously. The patch adds > 'num-atus' property to PCIe dts node to describe the number of > PCIe controller's ATUs. If num_atus is bigger than or equal to 4, > we will change ATUs assignment: ATU0 for CFG0, ATU1 for CFG1, > ATU2 for MEM, ATU3 for IO. > > Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> > --- > .../devicetree/bindings/pci/designware-pcie.txt | 1 + > drivers/pci/host/pcie-designware.c | 48 ++++++++++++++++------ > drivers/pci/host/pcie-designware.h | 5 +++ > 3 files changed, 41 insertions(+), 13 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt > index 9f4faa8..500796e 100644 > --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt > @@ -26,3 +26,4 @@ Optional properties: > - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to > specify this property, to keep backwards compatibility a range of 0x00-0xff > is assumed if not present) > +- num-atus: number of ATUs This lacks documentation for the default value if not present. > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index dfed00a..b872dd0 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -48,6 +48,8 @@ > #define PCIE_ATU_VIEWPORT 0x900 > #define PCIE_ATU_REGION_INBOUND (0x1 << 31) > #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) > +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0) > +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) > #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) > #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) > #define PCIE_ATU_CR1 0x904 > @@ -346,7 +348,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > struct of_pci_range range; > struct of_pci_range_parser parser; > struct resource *cfg_res; > - u32 val, na, ns; > + u32 num_atus, val, na, ns; > const __be32 *addrp; > int i, index, ret; > > @@ -486,6 +488,18 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > } > } > > + if (of_property_read_u32(np, "num-atus", &num_atus)) > + num_atus = 2; You don't need this check. Just initialize num_atus to 2, of_property_read_u32() won't touch the value if the property isn't found. > + if (num_atus >= 4) { > + pp->atu_cfg0_idx = PCIE_ATU_REGION_INDEX0; > + pp->atu_cfg1_idx = PCIE_ATU_REGION_INDEX1; > + pp->atu_mem_idx = PCIE_ATU_REGION_INDEX2; > + pp->atu_io_idx = PCIE_ATU_REGION_INDEX3; > + } else { > + pp->atu_cfg0_idx = pp->atu_mem_idx = PCIE_ATU_REGION_INDEX0; > + pp->atu_cfg1_idx = pp->atu_io_idx = PCIE_ATU_REGION_INDEX1; > + } > + > if (pp->ops->host_init) > pp->ops->host_init(pp); > > @@ -511,8 +525,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > > static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) > { > - /* Program viewport 0 : OUTBOUND : CFG0 */ > - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, > + /* Program viewport : OUTBOUND : CFG0 */ > + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg0_idx, > PCIE_ATU_VIEWPORT); > dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE); > dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE); > @@ -526,8 +540,8 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) > > static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) > { > - /* Program viewport 1 : OUTBOUND : CFG1 */ > - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, > + /* Program viewport : OUTBOUND : CFG1 */ > + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg1_idx, > PCIE_ATU_VIEWPORT); > dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); > dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE); > @@ -541,8 +555,8 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) > > static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) > { > - /* Program viewport 0 : OUTBOUND : MEM */ > - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, > + /* Program viewport : OUTBOUND : MEM */ > + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_mem_idx, > PCIE_ATU_VIEWPORT); > dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); > dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE); > @@ -557,8 +571,8 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) > > static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) > { > - /* Program viewport 1 : OUTBOUND : IO */ > - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, > + /* Program viewport : OUTBOUND : IO */ > + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_io_idx, > PCIE_ATU_VIEWPORT); > dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); > dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE); > @@ -585,12 +599,14 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, > dw_pcie_prog_viewport_cfg0(pp, busdev); > ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size, > val); > - dw_pcie_prog_viewport_mem_outbound(pp); > + if (pp->atu_mem_idx == pp->atu_cfg0_idx) > + dw_pcie_prog_viewport_mem_outbound(pp); > } else { > dw_pcie_prog_viewport_cfg1(pp, busdev); > ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size, > val); > - dw_pcie_prog_viewport_io_outbound(pp); > + if (pp->atu_io_idx == pp->atu_cfg1_idx) > + dw_pcie_prog_viewport_io_outbound(pp); > } > > return ret; > @@ -610,12 +626,14 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, > dw_pcie_prog_viewport_cfg0(pp, busdev); > ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size, > val); > - dw_pcie_prog_viewport_mem_outbound(pp); > + if (pp->atu_mem_idx == pp->atu_cfg0_idx) > + dw_pcie_prog_viewport_mem_outbound(pp); > } else { > dw_pcie_prog_viewport_cfg1(pp, busdev); > ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size, > val); > - dw_pcie_prog_viewport_io_outbound(pp); > + if (pp->atu_io_idx == pp->atu_cfg1_idx) > + dw_pcie_prog_viewport_io_outbound(pp); > } > > return ret; > @@ -770,6 +788,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp) > u32 membase; > u32 memlimit; > > + /* set ATUs setting for MEM and IO */ > + dw_pcie_prog_viewport_mem_outbound(pp); > + dw_pcie_prog_viewport_io_outbound(pp); > + > /* set the number of lanes */ > dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); > val &= ~PORT_LINK_MODE_MASK; > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h > index c625675..404f601 100644 > --- a/drivers/pci/host/pcie-designware.h > +++ b/drivers/pci/host/pcie-designware.h > @@ -53,6 +53,11 @@ struct pcie_port { > struct irq_domain *irq_domain; > unsigned long msi_data; > DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); > + /* ATUs setting */ > + u8 atu_cfg0_idx; > + u8 atu_cfg1_idx; > + u8 atu_mem_idx; > + u8 atu_io_idx; I don't like those single values. Can we please make this an array indexed by a proper enum? Like this: enum ATU_TYPE { ATU_TYPE_CFG0 = 0, ATU_TYPE_CFG1 = 1, ATU_TYPE_MEM = 2, ATU_TYPE_IO = 3, ATU_TYPE_MAX } u8 atu_idx[ATU_TYPE_MAX];
Hi Lucas, Thanks for your comments. Please see my reply inline. Thanks, Minghuan On 2014?11?10? 20:00, Lucas Stach wrote: > Am Montag, den 10.11.2014, 18:43 +0800 schrieb Minghuan Lian: >> Currently, pcie-designware.c only supports two ATUs, ATU0 is used >> for CFG0 and MEM, ATU1 is used for CFG1 and IO. There is a conflict >> when MEM and CFG0 are accessed simultaneously. The patch adds >> 'num-atus' property to PCIe dts node to describe the number of >> PCIe controller's ATUs. If num_atus is bigger than or equal to 4, >> we will change ATUs assignment: ATU0 for CFG0, ATU1 for CFG1, >> ATU2 for MEM, ATU3 for IO. >> >> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> >> --- >> .../devicetree/bindings/pci/designware-pcie.txt | 1 + >> drivers/pci/host/pcie-designware.c | 48 ++++++++++++++++------ >> drivers/pci/host/pcie-designware.h | 5 +++ >> 3 files changed, 41 insertions(+), 13 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt >> index 9f4faa8..500796e 100644 >> --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt >> +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt >> @@ -26,3 +26,4 @@ Optional properties: >> - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to >> specify this property, to keep backwards compatibility a range of 0x00-0xff >> is assumed if not present) >> +- num-atus: number of ATUs > This lacks documentation for the default value if not present. [Minghuan] I will add default value >> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c >> index dfed00a..b872dd0 100644 >> --- a/drivers/pci/host/pcie-designware.c >> +++ b/drivers/pci/host/pcie-designware.c >> @@ -48,6 +48,8 @@ >> #define PCIE_ATU_VIEWPORT 0x900 >> #define PCIE_ATU_REGION_INBOUND (0x1 << 31) >> #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) >> +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0) >> +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) >> #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) >> #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) >> #define PCIE_ATU_CR1 0x904 >> @@ -346,7 +348,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp) >> struct of_pci_range range; >> struct of_pci_range_parser parser; >> struct resource *cfg_res; >> - u32 val, na, ns; >> + u32 num_atus, val, na, ns; >> const __be32 *addrp; >> int i, index, ret; >> >> @@ -486,6 +488,18 @@ int __init dw_pcie_host_init(struct pcie_port *pp) >> } >> } >> >> + if (of_property_read_u32(np, "num-atus", &num_atus)) >> + num_atus = 2; > You don't need this check. Just initialize num_atus to 2, > of_property_read_u32() won't touch the value if the property isn't > found. [Minghuan] Ok, I will change it. >> + if (num_atus >= 4) { >> + pp->atu_cfg0_idx = PCIE_ATU_REGION_INDEX0; >> + pp->atu_cfg1_idx = PCIE_ATU_REGION_INDEX1; >> + pp->atu_mem_idx = PCIE_ATU_REGION_INDEX2; >> + pp->atu_io_idx = PCIE_ATU_REGION_INDEX3; >> + } else { >> + pp->atu_cfg0_idx = pp->atu_mem_idx = PCIE_ATU_REGION_INDEX0; >> + pp->atu_cfg1_idx = pp->atu_io_idx = PCIE_ATU_REGION_INDEX1; >> + } >> + >> if (pp->ops->host_init) >> pp->ops->host_init(pp); >> >> @@ -511,8 +525,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp) >> >> static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) >> { >> - /* Program viewport 0 : OUTBOUND : CFG0 */ >> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, >> + /* Program viewport : OUTBOUND : CFG0 */ >> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg0_idx, >> PCIE_ATU_VIEWPORT); >> dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE); >> dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE); >> @@ -526,8 +540,8 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) >> >> static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) >> { >> - /* Program viewport 1 : OUTBOUND : CFG1 */ >> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, >> + /* Program viewport : OUTBOUND : CFG1 */ >> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg1_idx, >> PCIE_ATU_VIEWPORT); >> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); >> dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE); >> @@ -541,8 +555,8 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) >> >> static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) >> { >> - /* Program viewport 0 : OUTBOUND : MEM */ >> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, >> + /* Program viewport : OUTBOUND : MEM */ >> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_mem_idx, >> PCIE_ATU_VIEWPORT); >> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); >> dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE); >> @@ -557,8 +571,8 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) >> >> static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) >> { >> - /* Program viewport 1 : OUTBOUND : IO */ >> - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, >> + /* Program viewport : OUTBOUND : IO */ >> + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_io_idx, >> PCIE_ATU_VIEWPORT); >> dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); >> dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE); >> @@ -585,12 +599,14 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, >> dw_pcie_prog_viewport_cfg0(pp, busdev); >> ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size, >> val); >> - dw_pcie_prog_viewport_mem_outbound(pp); >> + if (pp->atu_mem_idx == pp->atu_cfg0_idx) >> + dw_pcie_prog_viewport_mem_outbound(pp); >> } else { >> dw_pcie_prog_viewport_cfg1(pp, busdev); >> ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size, >> val); >> - dw_pcie_prog_viewport_io_outbound(pp); >> + if (pp->atu_io_idx == pp->atu_cfg1_idx) >> + dw_pcie_prog_viewport_io_outbound(pp); >> } >> >> return ret; >> @@ -610,12 +626,14 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, >> dw_pcie_prog_viewport_cfg0(pp, busdev); >> ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size, >> val); >> - dw_pcie_prog_viewport_mem_outbound(pp); >> + if (pp->atu_mem_idx == pp->atu_cfg0_idx) >> + dw_pcie_prog_viewport_mem_outbound(pp); >> } else { >> dw_pcie_prog_viewport_cfg1(pp, busdev); >> ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size, >> val); >> - dw_pcie_prog_viewport_io_outbound(pp); >> + if (pp->atu_io_idx == pp->atu_cfg1_idx) >> + dw_pcie_prog_viewport_io_outbound(pp); >> } >> >> return ret; >> @@ -770,6 +788,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp) >> u32 membase; >> u32 memlimit; >> >> + /* set ATUs setting for MEM and IO */ >> + dw_pcie_prog_viewport_mem_outbound(pp); >> + dw_pcie_prog_viewport_io_outbound(pp); >> + >> /* set the number of lanes */ >> dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); >> val &= ~PORT_LINK_MODE_MASK; >> diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h >> index c625675..404f601 100644 >> --- a/drivers/pci/host/pcie-designware.h >> +++ b/drivers/pci/host/pcie-designware.h >> @@ -53,6 +53,11 @@ struct pcie_port { >> struct irq_domain *irq_domain; >> unsigned long msi_data; >> DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); >> + /* ATUs setting */ >> + u8 atu_cfg0_idx; >> + u8 atu_cfg1_idx; >> + u8 atu_mem_idx; >> + u8 atu_io_idx; > I don't like those single values. Can we please make this an array > indexed by a proper enum? Like this: > > enum ATU_TYPE { > ATU_TYPE_CFG0 = 0, > ATU_TYPE_CFG1 = 1, > ATU_TYPE_MEM = 2, > ATU_TYPE_IO = 3, > ATU_TYPE_MAX > } > > u8 atu_idx[ATU_TYPE_MAX]; [Minghuan] Great. it's better to use array.
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt index 9f4faa8..500796e 100644 --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -26,3 +26,4 @@ Optional properties: - bus-range: PCI bus numbers covered (it is recommended for new devicetrees to specify this property, to keep backwards compatibility a range of 0x00-0xff is assumed if not present) +- num-atus: number of ATUs diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index dfed00a..b872dd0 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -48,6 +48,8 @@ #define PCIE_ATU_VIEWPORT 0x900 #define PCIE_ATU_REGION_INBOUND (0x1 << 31) #define PCIE_ATU_REGION_OUTBOUND (0x0 << 31) +#define PCIE_ATU_REGION_INDEX3 (0x3 << 0) +#define PCIE_ATU_REGION_INDEX2 (0x2 << 0) #define PCIE_ATU_REGION_INDEX1 (0x1 << 0) #define PCIE_ATU_REGION_INDEX0 (0x0 << 0) #define PCIE_ATU_CR1 0x904 @@ -346,7 +348,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp) struct of_pci_range range; struct of_pci_range_parser parser; struct resource *cfg_res; - u32 val, na, ns; + u32 num_atus, val, na, ns; const __be32 *addrp; int i, index, ret; @@ -486,6 +488,18 @@ int __init dw_pcie_host_init(struct pcie_port *pp) } } + if (of_property_read_u32(np, "num-atus", &num_atus)) + num_atus = 2; + if (num_atus >= 4) { + pp->atu_cfg0_idx = PCIE_ATU_REGION_INDEX0; + pp->atu_cfg1_idx = PCIE_ATU_REGION_INDEX1; + pp->atu_mem_idx = PCIE_ATU_REGION_INDEX2; + pp->atu_io_idx = PCIE_ATU_REGION_INDEX3; + } else { + pp->atu_cfg0_idx = pp->atu_mem_idx = PCIE_ATU_REGION_INDEX0; + pp->atu_cfg1_idx = pp->atu_io_idx = PCIE_ATU_REGION_INDEX1; + } + if (pp->ops->host_init) pp->ops->host_init(pp); @@ -511,8 +525,8 @@ int __init dw_pcie_host_init(struct pcie_port *pp) static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) { - /* Program viewport 0 : OUTBOUND : CFG0 */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, + /* Program viewport : OUTBOUND : CFG0 */ + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg0_idx, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, pp->cfg0_mod_base, PCIE_ATU_LOWER_BASE); dw_pcie_writel_rc(pp, (pp->cfg0_mod_base >> 32), PCIE_ATU_UPPER_BASE); @@ -526,8 +540,8 @@ static void dw_pcie_prog_viewport_cfg0(struct pcie_port *pp, u32 busdev) static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) { - /* Program viewport 1 : OUTBOUND : CFG1 */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, + /* Program viewport : OUTBOUND : CFG1 */ + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_cfg1_idx, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1); dw_pcie_writel_rc(pp, pp->cfg1_mod_base, PCIE_ATU_LOWER_BASE); @@ -541,8 +555,8 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev) static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) { - /* Program viewport 0 : OUTBOUND : MEM */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0, + /* Program viewport : OUTBOUND : MEM */ + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_mem_idx, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1); dw_pcie_writel_rc(pp, pp->mem_mod_base, PCIE_ATU_LOWER_BASE); @@ -557,8 +571,8 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp) static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp) { - /* Program viewport 1 : OUTBOUND : IO */ - dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1, + /* Program viewport : OUTBOUND : IO */ + dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | pp->atu_io_idx, PCIE_ATU_VIEWPORT); dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1); dw_pcie_writel_rc(pp, pp->io_mod_base, PCIE_ATU_LOWER_BASE); @@ -585,12 +599,14 @@ static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus, dw_pcie_prog_viewport_cfg0(pp, busdev); ret = dw_pcie_cfg_read(pp->va_cfg0_base + address, where, size, val); - dw_pcie_prog_viewport_mem_outbound(pp); + if (pp->atu_mem_idx == pp->atu_cfg0_idx) + dw_pcie_prog_viewport_mem_outbound(pp); } else { dw_pcie_prog_viewport_cfg1(pp, busdev); ret = dw_pcie_cfg_read(pp->va_cfg1_base + address, where, size, val); - dw_pcie_prog_viewport_io_outbound(pp); + if (pp->atu_io_idx == pp->atu_cfg1_idx) + dw_pcie_prog_viewport_io_outbound(pp); } return ret; @@ -610,12 +626,14 @@ static int dw_pcie_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus, dw_pcie_prog_viewport_cfg0(pp, busdev); ret = dw_pcie_cfg_write(pp->va_cfg0_base + address, where, size, val); - dw_pcie_prog_viewport_mem_outbound(pp); + if (pp->atu_mem_idx == pp->atu_cfg0_idx) + dw_pcie_prog_viewport_mem_outbound(pp); } else { dw_pcie_prog_viewport_cfg1(pp, busdev); ret = dw_pcie_cfg_write(pp->va_cfg1_base + address, where, size, val); - dw_pcie_prog_viewport_io_outbound(pp); + if (pp->atu_io_idx == pp->atu_cfg1_idx) + dw_pcie_prog_viewport_io_outbound(pp); } return ret; @@ -770,6 +788,10 @@ void dw_pcie_setup_rc(struct pcie_port *pp) u32 membase; u32 memlimit; + /* set ATUs setting for MEM and IO */ + dw_pcie_prog_viewport_mem_outbound(pp); + dw_pcie_prog_viewport_io_outbound(pp); + /* set the number of lanes */ dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val); val &= ~PORT_LINK_MODE_MASK; diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index c625675..404f601 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -53,6 +53,11 @@ struct pcie_port { struct irq_domain *irq_domain; unsigned long msi_data; DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); + /* ATUs setting */ + u8 atu_cfg0_idx; + u8 atu_cfg1_idx; + u8 atu_mem_idx; + u8 atu_io_idx; }; struct pcie_host_ops {
Currently, pcie-designware.c only supports two ATUs, ATU0 is used for CFG0 and MEM, ATU1 is used for CFG1 and IO. There is a conflict when MEM and CFG0 are accessed simultaneously. The patch adds 'num-atus' property to PCIe dts node to describe the number of PCIe controller's ATUs. If num_atus is bigger than or equal to 4, we will change ATUs assignment: ATU0 for CFG0, ATU1 for CFG1, ATU2 for MEM, ATU3 for IO. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> --- .../devicetree/bindings/pci/designware-pcie.txt | 1 + drivers/pci/host/pcie-designware.c | 48 ++++++++++++++++------ drivers/pci/host/pcie-designware.h | 5 +++ 3 files changed, 41 insertions(+), 13 deletions(-)