[v3,1/3] i2c: meson: add device tree bindings documentation

Commit Message

Beniamino Galvani Nov. 13, 2014, 7:32 p.m. UTC

This commit adds device tree bindings documentation for the I2C bus
controller found on Amlogic Meson SoCs.

Signed-off-by: Beniamino Galvani <[e-mail]>
---
 .../devicetree/bindings/i2c/i2c-meson.txt          | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-meson.txt

Comments

Wolfram Sang Nov. 18, 2014, 3:17 p.m. UTC | #1

On Thu, Nov 13, 2014 at 08:32:01PM +0100, Beniamino Galvani wrote:
> This commit adds device tree bindings documentation for the I2C bus
> controller found on Amlogic Meson SoCs.
> 
> Signed-off-by: Beniamino Galvani <[e-mail]>

Applied to for-next, thanks!

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-meson.txt b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
new file mode 100644
index 0000000..682f9a6
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
@@ -0,0 +1,24 @@ 
+Amlogic Meson I2C controller
+
+Required properties:
+ - compatible: must be "amlogic,meson6-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+
+Optional properties:
+- clock-frequency: the desired I2C bus clock frequency in Hz; in
+  absence of this property the default value is used (100 kHz).
+
+Examples:
+
+	i2c@c8100500 {
+		compatible = "amlogic,meson6-i2c";
+		reg = <0xc8100500 0x20>;
+		interrupts = <0 92 1>;
+		clocks = <&clk81>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};