@@ -150,7 +150,6 @@ struct mxs_auart_port {
#define MXS_AUART_DMA_RX_READY 3 /* bit 3 */
#define MXS_AUART_RTSCTS 4 /* bit 4 */
unsigned long flags;
- unsigned int mctrl_prev;
enum mxs_auart_type devtype;
unsigned int irq;
@@ -168,7 +167,6 @@ struct mxs_auart_port {
void *rx_dma_buf;
struct mctrl_gpios *gpios;
- int gpio_irq[UART_GPIO_MAX];
bool ms_irq_enabled;
};
@@ -434,29 +432,6 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl)
mctrl_gpio_set(s->gpios, mctrl);
}
-#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS)
-static u32 mxs_auart_modem_status(struct mxs_auart_port *s, u32 mctrl)
-{
- u32 mctrl_diff;
-
- mctrl_diff = mctrl ^ s->mctrl_prev;
- s->mctrl_prev = mctrl;
- if (mctrl_diff & MCTRL_ANY_DELTA && s->ms_irq_enabled &&
- s->port.state != NULL) {
- if (mctrl_diff & TIOCM_RI)
- s->port.icount.rng++;
- if (mctrl_diff & TIOCM_DSR)
- s->port.icount.dsr++;
- if (mctrl_diff & TIOCM_CD)
- uart_handle_dcd_change(&s->port, mctrl & TIOCM_CD);
- if (mctrl_diff & TIOCM_CTS)
- uart_handle_cts_change(&s->port, mctrl & TIOCM_CTS);
-
- wake_up_interruptible(&s->port.state->port.delta_msr_wait);
- }
- return mctrl;
-}
-
static u32 mxs_auart_get_mctrl(struct uart_port *u)
{
struct mxs_auart_port *s = to_auart_port(u);
@@ -484,18 +459,9 @@ static void mxs_auart_enable_ms(struct uart_port *port)
s->ms_irq_enabled = true;
- if (s->gpio_irq[UART_GPIO_CTS] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_CTS]);
- /* TODO: enable AUART_INTR_CTSMIEN otherwise */
-
- if (s->gpio_irq[UART_GPIO_DSR] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_DSR]);
-
- if (s->gpio_irq[UART_GPIO_RI] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_RI]);
-
- if (s->gpio_irq[UART_GPIO_DCD] >= 0)
- enable_irq(s->gpio_irq[UART_GPIO_DCD]);
+ mctrl_gpio_enable_ms(s->gpios);
+ /* TODO: enable AUART_INTR_CTSMIEN
+ * if s->gpios->irq[UART_GPIO_CTS] == 0 */
}
/*
@@ -513,18 +479,9 @@ static void mxs_auart_disable_ms(struct uart_port *port)
s->ms_irq_enabled = false;
- if (s->gpio_irq[UART_GPIO_CTS] >= 0)
- disable_irq(s->gpio_irq[UART_GPIO_CTS]);
- /* TODO: disable AUART_INTR_CTSMIEN otherwise */
-
- if (s->gpio_irq[UART_GPIO_DSR] >= 0)
- disable_irq(s->gpio_irq[UART_GPIO_DSR]);
-
- if (s->gpio_irq[UART_GPIO_RI] >= 0)
- disable_irq(s->gpio_irq[UART_GPIO_RI]);
-
- if (s->gpio_irq[UART_GPIO_DCD] >= 0)
- disable_irq(s->gpio_irq[UART_GPIO_DCD]);
+ mctrl_gpio_disable_ms(s->gpios);
+ /* TODO: disable AUART_INTR_CTSMIEN
+ * if s->gpios->irq[UART_GPIO_CTS] == 0 */
}
static int mxs_auart_dma_prep_rx(struct mxs_auart_port *s);
@@ -799,7 +756,6 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
{
u32 istat;
struct mxs_auart_port *s = context;
- u32 mctrl_temp = s->mctrl_prev;
u32 stat = readl(s->port.membase + AUART_STAT);
istat = readl(s->port.membase + AUART_INTR);
@@ -811,16 +767,6 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context)
| AUART_INTR_CTSMIS),
s->port.membase + AUART_INTR_CLR);
- /*
- * Dealing with GPIO interrupt
- */
- if (irq == s->gpio_irq[UART_GPIO_CTS] ||
- irq == s->gpio_irq[UART_GPIO_DCD] ||
- irq == s->gpio_irq[UART_GPIO_DSR] ||
- irq == s->gpio_irq[UART_GPIO_RI])
- mxs_auart_modem_status(s,
- mctrl_gpio_get(s->gpios, &mctrl_temp));
-
if (istat & AUART_INTR_CTSMIS) {
if (CTS_AT_AUART() && s->ms_irq_enabled)
uart_handle_cts_change(&s->port,
@@ -885,9 +831,6 @@ static int mxs_auart_startup(struct uart_port *u)
*/
writel(AUART_LINECTRL_FEN, u->membase + AUART_LINECTRL_SET);
- /* get initial status of modem lines */
- mctrl_gpio_get(s->gpios, &s->mctrl_prev);
-
s->ms_irq_enabled = false;
return 0;
}
@@ -1156,71 +1099,23 @@ static int serial_mxs_probe_dt(struct mxs_auart_port *s,
return 0;
}
-static bool mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
+static bool mxs_auart_init_gpios(struct mxs_auart_port *s)
{
- enum mctrl_gpio_idx i;
- struct gpio_desc *gpiod;
-
- s->gpios = mctrl_gpio_init(dev, 0);
+ s->gpios = mctrl_gpio_init_dt(&s->port, 0);
if (IS_ERR_OR_NULL(s->gpios))
return false;
/* Block (enabled before) DMA option if RTS or CTS is GPIO line */
if (!RTS_AT_AUART() || !CTS_AT_AUART()) {
if (test_bit(MXS_AUART_RTSCTS, &s->flags))
- dev_warn(dev,
+ dev_warn(s->dev,
"DMA and flow control via gpio may cause some problems. DMA disabled!\n");
clear_bit(MXS_AUART_RTSCTS, &s->flags);
}
- for (i = 0; i < UART_GPIO_MAX; i++) {
- gpiod = mctrl_gpio_to_gpiod(s->gpios, i);
- if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
- s->gpio_irq[i] = gpiod_to_irq(gpiod);
- else
- s->gpio_irq[i] = -EINVAL;
- }
-
return true;
}
-static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
-{
- enum mctrl_gpio_idx i;
-
- for (i = 0; i < UART_GPIO_MAX; i++)
- if (s->gpio_irq[i] >= 0)
- free_irq(s->gpio_irq[i], s);
-}
-
-static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
-{
- int *irq = s->gpio_irq;
- enum mctrl_gpio_idx i;
- int err = 0;
-
- for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
- if (irq[i] < 0)
- continue;
-
- irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
- err = request_irq(irq[i], mxs_auart_irq_handle,
- IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
- if (err)
- dev_err(s->dev, "%s - Can't get %d irq\n",
- __func__, irq[i]);
- }
-
- /*
- * If something went wrong, rollback.
- */
- while (err && (--i >= 0))
- if (irq[i] >= 0)
- free_irq(irq[i], s);
-
- return err;
-}
-
static int mxs_auart_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id =
@@ -1268,8 +1163,6 @@ static int mxs_auart_probe(struct platform_device *pdev)
s->port.type = PORT_IMX;
s->port.dev = s->dev = &pdev->dev;
- s->mctrl_prev = 0;
-
s->irq = platform_get_irq(pdev, 0);
s->port.irq = s->irq;
ret = request_irq(s->irq, mxs_auart_irq_handle, 0, dev_name(&pdev->dev), s);
@@ -1278,14 +1171,14 @@ static int mxs_auart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, s);
- if (!mxs_auart_init_gpios(s, &pdev->dev))
+ if (!mxs_auart_init_gpios(s))
dev_err(&pdev->dev,
"Failed to initialize GPIOs. The serial port may not work as expected\n");
/*
* Get the GPIO lines IRQ
*/
- ret = mxs_auart_request_gpio_irq(s);
+ ret = mctrl_gpio_request_irqs(s->gpios);
if (ret)
goto out_free_irq;
@@ -1305,7 +1198,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
return 0;
out_free_gpio_irq:
- mxs_auart_free_gpio_irq(s);
+ mctrl_gpio_free_irqs(s->gpios);
out_free_irq:
auart_port[pdev->id] = NULL;
free_irq(s->irq, s);
@@ -1325,7 +1218,7 @@ static int mxs_auart_remove(struct platform_device *pdev)
auart_port[pdev->id] = NULL;
- mxs_auart_free_gpio_irq(s);
+ mctrl_gpio_free_irqs(s->gpios);
clk_put(s->clk);
free_irq(s->irq, s);
kfree(s);
The patch updates mx-auart driver to use new mctrl_gpio helpers for gpio irqs. The code is much simpler now. Signed-off-by: Janusz Uzycki <j.uzycki@elproma.com.pl> --- drivers/tty/serial/mxs-auart.c | 133 +++------------------------ 1 file changed, 13 insertions(+), 120 deletions(-)