| Message ID | 1416512485-7292-2-git-send-email-joshc@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, 20 Nov 2014, Josh Cartwright wrote: > The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick > clock and four regulator resources. Provide definitions for them. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- > include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) What do you want me to do with this patch? I'm guessing the other patches in the set depend on these new defines? I can't even check because you've only send me 2 of the 3 patches in the set. > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..6d4e3ec 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -12,6 +12,7 @@ frequencies. > "qcom,rpm-apq8064" > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > + "qcom,rpm-ipq8064" > > - reg: > Usage: required > @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. > "qcom,rpm-pm8901-ftsmps" > "qcom,rpm-pm8921-smps" > "qcom,rpm-pm8921-ftsmps" > + "qcom,rpm-smb208" > > - reg: > Usage: required > @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. > QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, > QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, > QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, > - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 > + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, > + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, > + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b > > - bias-pull-down: > Usage: optional > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 388a6f3..13a9d4b 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -141,6 +141,12 @@ > #define QCOM_RPM_SYS_FABRIC_MODE 131 > #define QCOM_RPM_USB_OTG_SWITCH 132 > #define QCOM_RPM_VDDMIN_GPIO 133 > +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 > +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 > +#define QCOM_RPM_SMB208_S1a 136 > +#define QCOM_RPM_SMB208_S1b 137 > +#define QCOM_RPM_SMB208_S2a 138 > +#define QCOM_RPM_SMB208_S2b 139 > > /* > * Constants used to select force mode for regulators.
On Thu, 20 Nov 2014, Josh Cartwright wrote: > The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick > clock and four regulator resources. Provide definitions for them. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- > include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) For my own reference: Acked-by: Lee Jones <lee.jones@linaro.org> > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..6d4e3ec 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -12,6 +12,7 @@ frequencies. > "qcom,rpm-apq8064" > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > + "qcom,rpm-ipq8064" > > - reg: > Usage: required > @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. > "qcom,rpm-pm8901-ftsmps" > "qcom,rpm-pm8921-smps" > "qcom,rpm-pm8921-ftsmps" > + "qcom,rpm-smb208" > > - reg: > Usage: required > @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. > QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, > QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, > QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, > - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 > + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, > + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, > + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b > > - bias-pull-down: > Usage: optional > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 388a6f3..13a9d4b 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -141,6 +141,12 @@ > #define QCOM_RPM_SYS_FABRIC_MODE 131 > #define QCOM_RPM_USB_OTG_SWITCH 132 > #define QCOM_RPM_VDDMIN_GPIO 133 > +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 > +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 > +#define QCOM_RPM_SMB208_S1a 136 > +#define QCOM_RPM_SMB208_S1b 137 > +#define QCOM_RPM_SMB208_S2a 138 > +#define QCOM_RPM_SMB208_S2b 139 > > /* > * Constants used to select force mode for regulators.
On 11/24/14 02:38, Lee Jones wrote: > On Thu, 20 Nov 2014, Josh Cartwright wrote: > >> The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick >> clock and four regulator resources. Provide definitions for them. >> >> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> >> --- >> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- >> include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ >> 2 files changed, 11 insertions(+), 1 deletion(-) > For my own reference: > > Acked-by: Lee Jones <lee.jones@linaro.org> Lee, can you pick this patch up please? > >> diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt >> index 4264021..6d4e3ec 100644 >> --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt >> +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt >> @@ -12,6 +12,7 @@ frequencies. >> "qcom,rpm-apq8064" >> "qcom,rpm-msm8660" >> "qcom,rpm-msm8960" >> + "qcom,rpm-ipq8064" >> >> - reg: >> Usage: required >> @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. >> "qcom,rpm-pm8901-ftsmps" >> "qcom,rpm-pm8921-smps" >> "qcom,rpm-pm8921-ftsmps" >> + "qcom,rpm-smb208" >> >> - reg: >> Usage: required >> @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. >> QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, >> QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, >> QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, >> - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 >> + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, >> + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, >> + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b >> >> - bias-pull-down: >> Usage: optional >> diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h >> index 388a6f3..13a9d4b 100644 >> --- a/include/dt-bindings/mfd/qcom-rpm.h >> +++ b/include/dt-bindings/mfd/qcom-rpm.h >> @@ -141,6 +141,12 @@ >> #define QCOM_RPM_SYS_FABRIC_MODE 131 >> #define QCOM_RPM_USB_OTG_SWITCH 132 >> #define QCOM_RPM_VDDMIN_GPIO 133 >> +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 >> +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 >> +#define QCOM_RPM_SMB208_S1a 136 >> +#define QCOM_RPM_SMB208_S1b 137 >> +#define QCOM_RPM_SMB208_S2a 138 >> +#define QCOM_RPM_SMB208_S2b 139 >> >> /* >> * Constants used to select force mode for regulators.
On Thu, 20 Nov 2014, Josh Cartwright wrote: > The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick > clock and four regulator resources. Provide definitions for them. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- > include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) Applied with Stephen's Ack. > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..6d4e3ec 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -12,6 +12,7 @@ frequencies. > "qcom,rpm-apq8064" > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > + "qcom,rpm-ipq8064" > > - reg: > Usage: required > @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. > "qcom,rpm-pm8901-ftsmps" > "qcom,rpm-pm8921-smps" > "qcom,rpm-pm8921-ftsmps" > + "qcom,rpm-smb208" > > - reg: > Usage: required > @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. > QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, > QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, > QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, > - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 > + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, > + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, > + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b > > - bias-pull-down: > Usage: optional > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 388a6f3..13a9d4b 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -141,6 +141,12 @@ > #define QCOM_RPM_SYS_FABRIC_MODE 131 > #define QCOM_RPM_USB_OTG_SWITCH 132 > #define QCOM_RPM_VDDMIN_GPIO 133 > +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 > +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 > +#define QCOM_RPM_SMB208_S1a 136 > +#define QCOM_RPM_SMB208_S1b 137 > +#define QCOM_RPM_SMB208_S2a 138 > +#define QCOM_RPM_SMB208_S2b 139 > > /* > * Constants used to select force mode for regulators.
On Thu, 20 Nov 2014, Josh Cartwright wrote: > The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick > clock and four regulator resources. Provide definitions for them. > > Signed-off-by: Josh Cartwright <joshc@codeaurora.org> > --- > Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- > include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ > 2 files changed, 11 insertions(+), 1 deletion(-) Doesn't apply. Please rebase and resend. > diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > index 4264021..6d4e3ec 100644 > --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt > @@ -12,6 +12,7 @@ frequencies. > "qcom,rpm-apq8064" > "qcom,rpm-msm8660" > "qcom,rpm-msm8960" > + "qcom,rpm-ipq8064" > > - reg: > Usage: required > @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. > "qcom,rpm-pm8901-ftsmps" > "qcom,rpm-pm8921-smps" > "qcom,rpm-pm8921-ftsmps" > + "qcom,rpm-smb208" > > - reg: > Usage: required > @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. > QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, > QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, > QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, > - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 > + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, > + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, > + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b > > - bias-pull-down: > Usage: optional > diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h > index 388a6f3..13a9d4b 100644 > --- a/include/dt-bindings/mfd/qcom-rpm.h > +++ b/include/dt-bindings/mfd/qcom-rpm.h > @@ -141,6 +141,12 @@ > #define QCOM_RPM_SYS_FABRIC_MODE 131 > #define QCOM_RPM_USB_OTG_SWITCH 132 > #define QCOM_RPM_VDDMIN_GPIO 133 > +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 > +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 > +#define QCOM_RPM_SMB208_S1a 136 > +#define QCOM_RPM_SMB208_S1b 137 > +#define QCOM_RPM_SMB208_S2a 138 > +#define QCOM_RPM_SMB208_S2b 139 > > /* > * Constants used to select force mode for regulators.
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 4264021..6d4e3ec 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -12,6 +12,7 @@ frequencies. "qcom,rpm-apq8064" "qcom,rpm-msm8660" "qcom,rpm-msm8960" + "qcom,rpm-ipq8064" - reg: Usage: required @@ -67,6 +68,7 @@ of valid subnodes that can operate on these resources. "qcom,rpm-pm8901-ftsmps" "qcom,rpm-pm8921-smps" "qcom,rpm-pm8921-ftsmps" + "qcom,rpm-smb208" - reg: Usage: required @@ -76,7 +78,9 @@ of valid subnodes that can operate on these resources. QCOM_RPM_PM8058_SMPS0 - QCOM_RPM_PM8058_SMPS4, QCOM_RPM_PM8821_SMPS1 - QCOM_RPM_PM8821_SMPS2, QCOM_RPM_PM8901_SMPS0 - QCOM_RPM_PM8901_SMPS4, - QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8 + QCOM_RPM_PM8921_SMPS1 - QCOM_RPM_PM8921_SMPS8, + QCOM_RPM_SMB208_S1a, QCOM_RPM_SMB208_S1b, + QCOM_RPM_SMB208_S2a, QCOM_RPM_SMB208_S2b - bias-pull-down: Usage: optional diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h index 388a6f3..13a9d4b 100644 --- a/include/dt-bindings/mfd/qcom-rpm.h +++ b/include/dt-bindings/mfd/qcom-rpm.h @@ -141,6 +141,12 @@ #define QCOM_RPM_SYS_FABRIC_MODE 131 #define QCOM_RPM_USB_OTG_SWITCH 132 #define QCOM_RPM_VDDMIN_GPIO 133 +#define QCOM_RPM_NSS_FABRIC_0_CLK 134 +#define QCOM_RPM_NSS_FABRIC_1_CLK 135 +#define QCOM_RPM_SMB208_S1a 136 +#define QCOM_RPM_SMB208_S1b 137 +#define QCOM_RPM_SMB208_S2a 138 +#define QCOM_RPM_SMB208_S2b 139 /* * Constants used to select force mode for regulators.
The IPQ8064 SoC has several RPM-controlled resources, an NSS fabrick clock and four regulator resources. Provide definitions for them. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> --- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 6 +++++- include/dt-bindings/mfd/qcom-rpm.h | 6 ++++++ 2 files changed, 11 insertions(+), 1 deletion(-)