new file mode 100644
@@ -0,0 +1,115 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM 0
+CLKID_AHB_RAM 1
+CLKID_AHB_GPIO 2
+CLKID_AHB_MAC 3
+CLKID_AHB_EMI 4
+CLKID_AHB_USB0 5
+CLKID_AHB_USB1 6
+CLKID_AHB_DMA0 7
+CLKID_AHB_DMA1 8
+CLKID_AHB_UART0 9
+CLKID_AHB_UART1 10
+CLKID_AHB_UART2 11
+CLKID_AHB_UART3 12
+CLKID_AHB_UART4 13
+CLKID_AHB_UART5 14
+CLKID_AHB_UART6 15
+CLKID_AHB_UART7 16
+CLKID_AHB_UART8 17
+CLKID_AHB_UART9 18
+CLKID_AHB_I2S0 19
+CLKID_AHB_I2C0 20
+CLKID_AHB_I2C1 21
+CLKID_AHB_SSP0 22
+CLKID_AHB_IOCONFIG 23
+CLKID_AHB_WDT 24
+CLKID_AHB_CAN0 25
+CLKID_AHB_CAN1 26
+CLKID_AHB_MPWM 27
+CLKID_AHB_SPI0 28
+CLKID_AHB_SPI1 29
+CLKID_AHB_QEI 30
+CLKID_AHB_QUADSPI0 31
+CLKID_AHB_CAMIF 32
+CLKID_AHB_LCDIF 33
+CLKID_AHB_TIMER0 34
+CLKID_AHB_TIMER1 35
+CLKID_AHB_TIMER2 36
+CLKID_AHB_TIMER3 37
+CLKID_AHB_IRQ 38
+CLKID_AHB_RTC 39
+CLKID_AHB_NAND 40
+CLKID_AHB_ADC0 41
+CLKID_AHB_LED 42
+CLKID_AHB_DAC0 43
+CLKID_AHB_LCD 44
+CLKID_AHB_I2S1 45
+CLKID_AHB_MAC1 46
+
+CLKID_SYS_CPU 47
+CLKID_SYS_AHB 48
+CLKID_SYS_I2S0M 49
+CLKID_SYS_I2S0S 50
+CLKID_SYS_I2S1M 51
+CLKID_SYS_I2S1S 52
+CLKID_SYS_UART0 53
+CLKID_SYS_UART1 54
+CLKID_SYS_UART2 55
+CLKID_SYS_UART3 56
+CLKID_SYS_UART4 56
+CLKID_SYS_UART5 57
+CLKID_SYS_UART6 58
+CLKID_SYS_UART7 59
+CLKID_SYS_UART8 60
+CLKID_SYS_UART9 61
+CLKID_SYS_SPI0 62
+CLKID_SYS_SPI1 63
+CLKID_SYS_QUADSPI 64
+CLKID_SYS_SSP0 65
+CLKID_SYS_NAND 66
+CLKID_SYS_TRACE 67
+CLKID_SYS_CAMM 68
+CLKID_SYS_WDT 69
+CLKID_SYS_CLKOUT 70
+CLKID_SYS_MAC 71
+CLKID_SYS_LCD 72
+CLKID_SYS_ADCANA 73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+ compatible = "alphascale,asm9260-uart";
+ reg = <0x80010000 0x4000>;
+ clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+ interrupts = <19>;
+ status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+};
+
ACC is for AlphaScale Clock Controller. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> --- .../devicetree/bindings/clock/alphascale,acc.txt | 115 +++++++++++++++++++++ 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/alphascale,acc.txt