diff mbox

[07/10] ARM: dts: sun9i: Add pinmux setting for mmc0

Message ID 1417588565-26215-8-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai Dec. 3, 2014, 6:36 a.m. UTC 
mmc0 is only available on port F, and is always used with a 4 bit wide
bus for the onboard micro-sd slot.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Maxime Ripard Dec. 7, 2014, 3:01 p.m. UTC | #1 
Hi,

On Wed, Dec 03, 2014 at 02:36:02PM +0800, Chen-Yu Tsai wrote:
> mmc0 is only available on port F, and is always used with a 4 bit wide
> bus for the onboard micro-sd slot.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>
> ---
>  arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
> index c766698..f5b5645 100644
> --- a/arch/arm/boot/dts/sun9i-a80.dtsi
> +++ b/arch/arm/boot/dts/sun9i-a80.dtsi
> @@ -458,6 +458,14 @@
>  				allwinner,pull = <0>;
>  			};
>  
> +			mmc0_pins: mmc0 {
> +				allwinner,pins = "PF0","PF1","PF2","PF3",
> +						 "PF4","PF5";

A space after each comma please.

Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index c766698..f5b5645 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -458,6 +458,14 @@ 
 				allwinner,pull = <0>;
 			};
 
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0","PF1","PF2","PF3",
+						 "PF4","PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PH12", "PH13";
 				allwinner,function = "uart0";