@@ -191,10 +191,9 @@ struct at_xdmac_chan {
struct dma_chan chan;
void __iomem *ch_regs;
u32 mask; /* Channel Mask */
- u32 cfg[3]; /* Channel Configuration Register */
- #define AT_XDMAC_CUR_CFG 0 /* Current channel conf */
- #define AT_XDMAC_DEV_TO_MEM_CFG 1 /* Predifined dev to mem channel conf */
- #define AT_XDMAC_MEM_TO_DEV_CFG 2 /* Predifined mem to dev channel conf */
+ u32 cfg[2]; /* Channel Configuration Register */
+ #define AT_XDMAC_DEV_TO_MEM_CFG 0 /* Predifined dev to mem channel conf */
+ #define AT_XDMAC_MEM_TO_DEV_CFG 1 /* Predifined mem to dev channel conf */
u8 perid; /* Peripheral ID */
u8 perif; /* Peripheral Interface */
u8 memif; /* Memory Interface */
@@ -358,14 +357,7 @@ static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan,
*/
if (is_slave_direction(first->direction)) {
reg = AT_XDMAC_CNDC_NDVIEW_NDV1;
- if (first->direction == DMA_MEM_TO_DEV)
- atchan->cfg[AT_XDMAC_CUR_CFG] =
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
- else
- atchan->cfg[AT_XDMAC_CUR_CFG] =
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
- at_xdmac_chan_write(atchan, AT_XDMAC_CC,
- atchan->cfg[AT_XDMAC_CUR_CFG]);
+ at_xdmac_chan_write(atchan, AT_XDMAC_CC, first->lld.mbr_cfg);
} else {
/*
* No need to write AT_XDMAC_CC reg, it will be done when the
@@ -569,7 +561,6 @@ at_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
struct at_xdmac_desc *first = NULL, *prev = NULL;
struct scatterlist *sg;
int i;
- u32 cfg;
unsigned int xfer_size = 0;
if (!sgl)
@@ -616,17 +607,17 @@ at_xdmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
if (direction == DMA_DEV_TO_MEM) {
desc->lld.mbr_sa = atchan->per_src_addr;
desc->lld.mbr_da = mem;
- cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
+ desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = mem;
desc->lld.mbr_da = atchan->per_dst_addr;
- cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
}
- desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1 /* next descriptor view */
- | AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */
- | AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */
- | (i == sg_len - 1 ? 0 : AT_XDMAC_MBR_UBC_NDE) /* descriptor fetch */
- | len / (1 << at_xdmac_get_dwidth(cfg)); /* microblock length */
+ desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1 /* next descriptor view */
+ | AT_XDMAC_MBR_UBC_NDEN /* next descriptor dst parameter update */
+ | AT_XDMAC_MBR_UBC_NSEN /* next descriptor src parameter update */
+ | (i == sg_len - 1 ? 0 : AT_XDMAC_MBR_UBC_NDE) /* descriptor fetch */
+ | len / (1 << at_xdmac_get_dwidth(desc->lld.mbr_cfg)); /* microblock length */
dev_dbg(chan2dev(chan),
"%s: lld: mbr_sa=%pad, mbr_da=%pad, mbr_ubc=0x%08x\n",
__func__, &desc->lld.mbr_sa, &desc->lld.mbr_da, desc->lld.mbr_ubc);
@@ -890,7 +881,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
enum dma_status ret;
int residue;
u32 cur_nda, mask, value;
- u8 dwidth = at_xdmac_get_dwidth(atchan->cfg[AT_XDMAC_CUR_CFG]);
+ u8 dwidth = 0;
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_COMPLETE)
@@ -920,7 +911,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
*/
mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC;
value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM;
- if ((atchan->cfg[AT_XDMAC_CUR_CFG] & mask) == value) {
+ if ((desc->lld.mbr_cfg & mask) == value) {
at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
cpu_relax();
@@ -934,6 +925,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
*/
descs_list = &desc->descs_list;
list_for_each_entry_safe(desc, _desc, descs_list, desc_node) {
+ dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
residue -= (desc->lld.mbr_ubc & 0xffffff) << dwidth;
if ((desc->lld.mbr_nda & 0xfffffffc) == cur_nda)
break;
This patch simplifies the channel configuration register management. Relying on a "software snapshot" of the configuration is not safe and too complex. Multiple dwidths will be introduced for slave transfers. In this case, it becomes quite difficult to have an accurate snapshot of the channel configuration register in the way it is done. Using the channel configuration available in the lli descriptor simplifies this stuff. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> --- drivers/dma/at_xdmac.c | 36 ++++++++++++++---------------------- 1 file changed, 14 insertions(+), 22 deletions(-)