| Message ID | 1418901035-22900-1-git-send-email-wens@csie.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Thu, Dec 18, 2014 at 07:10:35PM +0800, Chen-Yu Tsai wrote: > usbphy0 support in the sunxi usb-phy driver has been merged, but the > dtsi's for sun4i/sun5i haven't been updated. This results in the phy > driver failing to load, breaking usb support. > > Fixes: 6827a46f5994 ('phy: sun4i: add support for USB phy0') > Signed-off-by: Chen-Yu Tsai <wens@csie.org> > --- > > Hi Maxime, > > The phy-sun4i-usb usbphy0 update is merged into Linus's tree. > Please queue this one for 3.19 fixes. Applied, thanks! Maxime
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 7b4099fcf817..e3422309e54b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -438,8 +438,8 @@ reg-names = "phy_ctrl", "pmu1", "pmu2"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>, <&usb_clk 2>; - reset-names = "usb1_reset", "usb2_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 1b76667f3182..3c3c1920788a 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -390,8 +390,8 @@ reg-names = "phy_ctrl", "pmu1"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>; - reset-names = "usb1_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index c35217ea1f64..2448d7f38d6b 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -349,8 +349,8 @@ reg-names = "phy_ctrl", "pmu1"; clocks = <&usb_clk 8>; clock-names = "usb_phy"; - resets = <&usb_clk 1>; - reset-names = "usb1_reset"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; status = "disabled"; };
usbphy0 support in the sunxi usb-phy driver has been merged, but the dtsi's for sun4i/sun5i haven't been updated. This results in the phy driver failing to load, breaking usb support. Fixes: 6827a46f5994 ('phy: sun4i: add support for USB phy0') Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- Hi Maxime, The phy-sun4i-usb usbphy0 update is merged into Linus's tree. Please queue this one for 3.19 fixes. --- arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++-- arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++-- arch/arm/boot/dts/sun5i-a13.dtsi | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)