@@ -482,6 +482,13 @@
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
+
+ pinctrl_mipi_panel: mipipanelgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+ >;
+ };
};
gpio_leds {
@@ -518,6 +525,19 @@
};
};
+&mipi_dsi {
+ status = "okay";
+
+ panel {
+ compatible = "truly,tft480800-16-e-dsi";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mipi_panel>;
+ reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ bs-gpios = <0>, <0>, <&gpio6 14 GPIO_ACTIVE_HIGH>, <0>;
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
The TRULY TFT480800-16-E panel is driven by the Himax HX8369A driver IC. The driver IC supports several display/control interface modes, including the MIPI DSI video mode and command mode. Signed-off-by: Liu Ying <Ying.Liu@freescale.com> --- v6->v7: * None. v5->v6: * None. v4->v5: * Replace the bs[3:0]-gpios properties with the bs-gpios property. This addresses Andrzej Hajda's comment. v3->v4: * None. v2->v3: * None. v1->v2: * To address Thierry Reding's comments, remove several unnecessary properties as they can be implied by the compatible string. * Fix the compatible string. * Remove the display-timings node from the panel node as it can be implied by the compatible string as well. * Remove the status property as it is unneeded. arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)