diff mbox

[v2,6/9] ARM: dts: sun5i: Add cpu thermal zones to dtsi

Message ID 1420798676-22856-7-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai Jan. 9, 2015, 10:17 a.m. UTC
The core temperature sensor now supports thermal zones. Add a thermal
zone mapping for the cpus with passive cooling (cpufreq throttling).

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---

changes since v1:

    - Use thermal dt bindings macros in cooling-device

---
 arch/arm/boot/dts/sun5i-a13.dtsi | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Eduardo Valentin Jan. 9, 2015, 6:10 p.m. UTC | #1
On Fri, Jan 09, 2015 at 06:17:53PM +0800, Chen-Yu Tsai wrote:
> The core temperature sensor now supports thermal zones. Add a thermal
> zone mapping for the cpus with passive cooling (cpufreq throttling).
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

This patch looks fine to me:

Acked-by: Eduardo Valentin <edubezval@gmail.com>

> ---
> 
> changes since v1:
> 
>     - Use thermal dt bindings macros in cooling-device
> 
> ---
>  arch/arm/boot/dts/sun5i-a13.dtsi | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index dee2aa5bc9ed..c26f58ea0850 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -13,6 +13,8 @@
>  
>  #include "skeleton.dtsi"
>  
> +#include <dt-bindings/thermal/thermal.h>
> +
>  #include <dt-bindings/dma/sun4i-a10.h>
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
> @@ -50,6 +52,38 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal {
> +			/* milliseconds */
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +			thermal-sensors = <&rtp>;
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert0>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
> +			trips {
> +				cpu_alert0: cpu_alert0 {
> +					/* milliCelsius */
> +					temperature = <850000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu_crit {
> +					/* milliCelsius */
> +					temperature = <100000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	memory {
>  		reg = <0x40000000 0x20000000>;
>  	};
> -- 
> 2.1.4
>
Eduardo Valentin Jan. 9, 2015, 6:11 p.m. UTC | #2
On Fri, Jan 09, 2015 at 06:17:53PM +0800, Chen-Yu Tsai wrote:
> The core temperature sensor now supports thermal zones. Add a thermal
> zone mapping for the cpus with passive cooling (cpufreq throttling).
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>


This patch looks fine to me:

Acked-by: Eduardo Valentin <edubezval@gmail.com>

> ---
> 
> changes since v1:
> 
>     - Use thermal dt bindings macros in cooling-device
> 
> ---
>  arch/arm/boot/dts/sun5i-a13.dtsi | 34 ++++++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
> index dee2aa5bc9ed..c26f58ea0850 100644
> --- a/arch/arm/boot/dts/sun5i-a13.dtsi
> +++ b/arch/arm/boot/dts/sun5i-a13.dtsi
> @@ -13,6 +13,8 @@
>  
>  #include "skeleton.dtsi"
>  
> +#include <dt-bindings/thermal/thermal.h>
> +
>  #include <dt-bindings/dma/sun4i-a10.h>
>  #include <dt-bindings/pinctrl/sun4i-a10.h>
>  
> @@ -50,6 +52,38 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu_thermal {
> +			/* milliseconds */
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +			thermal-sensors = <&rtp>;
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert0>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +
> +			trips {
> +				cpu_alert0: cpu_alert0 {
> +					/* milliCelsius */
> +					temperature = <850000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				cpu_crit: cpu_crit {
> +					/* milliCelsius */
> +					temperature = <100000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	memory {
>  		reg = <0x40000000 0x20000000>;
>  	};
> -- 
> 2.1.4
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index dee2aa5bc9ed..c26f58ea0850 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -13,6 +13,8 @@ 
 
 #include "skeleton.dtsi"
 
+#include <dt-bindings/thermal/thermal.h>
+
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -50,6 +52,38 @@ 
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <850000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	memory {
 		reg = <0x40000000 0x20000000>;
 	};