diff mbox

[v4,8/9] ARM: dts: sun9i: Add 8 bit mmc pinmux setting for mmc2

Message ID 1421471974-32719-9-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai Jan. 17, 2015, 5:19 a.m. UTC 
mmc2 is available on port C. Add a pinmux setting for 8 bit wide eMMC.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Maxime Ripard Jan. 19, 2015, 10:06 p.m. UTC | #1 
On Sat, Jan 17, 2015 at 01:19:33PM +0800, Chen-Yu Tsai wrote:
> mmc2 is available on port C. Add a pinmux setting for 8 bit wide eMMC.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> Signed-off-by: Andreas Färber <afaerber@suse.de>

Applied, thanks!
Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 7387fb2a5111..9e28ffc6dd90 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -478,6 +478,15 @@ 
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+						 "PC10", "PC11", "PC12",
+						 "PC13", "PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PH12", "PH13";
 				allwinner,function = "uart0";