| Message ID | 1421771935-31618-14-git-send-email-ajaykumar.rs@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Ajay Kumar wrote: > > Define videoports and use endpoints to describe the connection between > the encoder, bridge and the panel, instead of using phandles. > > Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> > Acked-by: Inki Dae <inki.dae@samsung.com> > Tested-by: Rahul Sharma <rahul.sharma@samsung.com> > Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> > Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> > Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> > --- > arch/arm/boot/dts/exynos5250-snow.dts | 30 ++++++++++++++++++++++++++++-- > 1 file changed, 28 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts > index b9aeec4..1bd5d3a 100644 > --- a/arch/arm/boot/dts/exynos5250-snow.dts > +++ b/arch/arm/boot/dts/exynos5250-snow.dts > @@ -183,7 +183,20 @@ > powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; > reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; > edid-emulation = <5>; > - panel = <&panel>; > + > + ports { > + port@0 { > + bridge_out: endpoint { > + remote-endpoint = <&panel_in>; > + }; > + }; > + > + port@1 { > + bridge_in: endpoint { > + remote-endpoint = <&dp_out>; > + }; > + }; > + }; > }; > }; > > @@ -228,6 +241,12 @@ > compatible = "auo,b116xw03"; > power-supply = <&fet6>; > backlight = <&backlight>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&bridge_out>; > + }; > + }; > }; > }; > > @@ -242,7 +261,14 @@ > samsung,link-rate = <0x0a>; > samsung,lane-count = <2>; > samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; > - bridge = <&ptn3460>; > + > + ports { > + port@0 { > + dp_out: endpoint { > + remote-endpoint = <&bridge_in>; > + }; > + }; > + }; > }; > > &ehci { > -- > 1.7.9.5 I'm fine on the DT changes in this series, shall I take 13/14 and 14/14 in Samsung tree? - Kukjin
Hi Kukjin, On Fri, Jan 23, 2015 at 12:31 PM, Kukjin Kim <kgene@kernel.org> wrote: > Ajay Kumar wrote: >> >> Define videoports and use endpoints to describe the connection between >> the encoder, bridge and the panel, instead of using phandles. >> >> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> >> Acked-by: Inki Dae <inki.dae@samsung.com> >> Tested-by: Rahul Sharma <rahul.sharma@samsung.com> >> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> >> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> >> Tested-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> >> --- >> arch/arm/boot/dts/exynos5250-snow.dts | 30 ++++++++++++++++++++++++++++-- >> 1 file changed, 28 insertions(+), 2 deletions(-) >> >> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts >> index b9aeec4..1bd5d3a 100644 >> --- a/arch/arm/boot/dts/exynos5250-snow.dts >> +++ b/arch/arm/boot/dts/exynos5250-snow.dts >> @@ -183,7 +183,20 @@ >> powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; >> reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; >> edid-emulation = <5>; >> - panel = <&panel>; >> + >> + ports { >> + port@0 { >> + bridge_out: endpoint { >> + remote-endpoint = <&panel_in>; >> + }; >> + }; >> + >> + port@1 { >> + bridge_in: endpoint { >> + remote-endpoint = <&dp_out>; >> + }; >> + }; >> + }; >> }; >> }; >> >> @@ -228,6 +241,12 @@ >> compatible = "auo,b116xw03"; >> power-supply = <&fet6>; >> backlight = <&backlight>; >> + >> + port { >> + panel_in: endpoint { >> + remote-endpoint = <&bridge_out>; >> + }; >> + }; >> }; >> }; >> >> @@ -242,7 +261,14 @@ >> samsung,link-rate = <0x0a>; >> samsung,lane-count = <2>; >> samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; >> - bridge = <&ptn3460>; >> + >> + ports { >> + port@0 { >> + dp_out: endpoint { >> + remote-endpoint = <&bridge_in>; >> + }; >> + }; >> + }; >> }; >> >> &ehci { >> -- >> 1.7.9.5 > > I'm fine on the DT changes in this series, shall I take 13/14 and 14/14 in > Samsung tree? Yes, please take these patches. Thanks and regards, Ajay Kumar
On 01/27/15 13:27, Ajay kumar wrote: > Hi Kukjin, > Hi, [...] >> >> I'm fine on the DT changes in this series, shall I take 13/14 and 14/14 in >> Samsung tree? > Yes, please take these patches. > Done, thanks. - Kukjin
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b9aeec4..1bd5d3a 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -183,7 +183,20 @@ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; edid-emulation = <5>; - panel = <&panel>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; }; @@ -228,6 +241,12 @@ compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; }; }; @@ -242,7 +261,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - bridge = <&ptn3460>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; &ehci {