diff mbox

[v3,03/10] ARM: dts: sun9i: Add usb clock nodes to a80 dtsi

Message ID 1422388455-25923-4-git-send-email-wens@csie.org (mailing list archive)
State New, archived
Headers show

Commit Message

Chen-Yu Tsai Jan. 27, 2015, 7:54 p.m. UTC 
The USB controller and phy clocks and resets have a separate address
block and driver. Add the nodes to represent them.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Maxime Ripard Feb. 1, 2015, 1:56 p.m. UTC | #1 
On Wed, Jan 28, 2015 at 03:54:08AM +0800, Chen-Yu Tsai wrote:
> The USB controller and phy clocks and resets have a separate address
> block and driver. Add the nodes to represent them.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks!

Maxime
diff mbox

Patch

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 9e28ffc6dd90..679cf2878800 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -147,6 +147,28 @@ 
 			clock-output-names = "osc32k";
 		};
 
+		usb_mod_clk: clk@00a08000 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-mod-clk";
+			reg = <0x00a08000 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb0_ahb", "usb_ohci0",
+					     "usb1_ahb", "usb_ohci1",
+					     "usb2_ahb", "usb_ohci2";
+		};
+
+		usb_phy_clk: clk@00a08004 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-phy-clk";
+			reg = <0x00a08004 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb_phy0", "usb_hsic1_480M",
+					     "usb_phy1", "usb_hsic2_480M",
+					     "usb_phy2", "usb_hsic_12M";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";