| Message ID | 1422524532-4275-1-git-send-email-jszhang@marvell.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 29 January 2015 at 10:42, Jisheng Zhang <jszhang@marvell.com> wrote: > I observed the Host Control2 register isn't correctly restored > after runtime resuming on BG2Q. For example, the register reads > as 0x800c before runtime suspend, but it's set as 0x8004 after runtime > resuming. This could results in a non working host. > > The reason is the Host Control2 is incorrectly reset when switching > voltage. We fix this by following the same sequence during initialization. > > Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Thanks! Applied for next. Kind regards Uffe > --- > drivers/mmc/host/sdhci.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c > index c9881ca..0ad412a 100644 > --- a/drivers/mmc/host/sdhci.c > +++ b/drivers/mmc/host/sdhci.c > @@ -2871,9 +2871,9 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) > /* Force clock and power re-program */ > host->pwr = 0; > host->clock = 0; > + sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); > sdhci_do_set_ios(host, &host->mmc->ios); > > - sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); > if ((host_flags & SDHCI_PV_ENABLED) && > !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { > spin_lock_irqsave(&host->lock, flags); > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index c9881ca..0ad412a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2871,9 +2871,9 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) /* Force clock and power re-program */ host->pwr = 0; host->clock = 0; + sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); sdhci_do_set_ios(host, &host->mmc->ios); - sdhci_do_start_signal_voltage_switch(host, &host->mmc->ios); if ((host_flags & SDHCI_PV_ENABLED) && !(host->quirks2 & SDHCI_QUIRK2_PRESET_VALUE_BROKEN)) { spin_lock_irqsave(&host->lock, flags);
I observed the Host Control2 register isn't correctly restored after runtime resuming on BG2Q. For example, the register reads as 0x800c before runtime suspend, but it's set as 0x8004 after runtime resuming. This could results in a non working host. The reason is the Host Control2 is incorrectly reset when switching voltage. We fix this by following the same sequence during initialization. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> --- drivers/mmc/host/sdhci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)