diff mbox

[v3,5/5] usb: phy: add phy-hi6220-usb

Message ID 1423554627-694-6-git-send-email-zhangfei.gao@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Zhangfei Gao Feb. 10, 2015, 7:50 a.m. UTC
Add usb phy controller for hi6220 platform

Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
---
 drivers/usb/phy/Kconfig          |   9 ++
 drivers/usb/phy/Makefile         |   1 +
 drivers/usb/phy/phy-hi6220-usb.c | 308 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 318 insertions(+)
 create mode 100644 drivers/usb/phy/phy-hi6220-usb.c
diff mbox

Patch

diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index c6d0c8e..405a3d0 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -173,6 +173,15 @@  config USB_MXS_PHY
 
 	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.
 
+config USB_HI6220_PHY
+	tristate "hi6220 USB PHY support"
+	select USB_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the HISILICON HI6220 USB PHY.
+
+	  To compile this driver as a module, choose M here.
+
 config USB_RCAR_PHY
 	tristate "Renesas R-Car USB PHY support"
 	depends on USB || USB_GADGET
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 75f2bba..00172d3 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -18,6 +18,7 @@  obj-$(CONFIG_SAMSUNG_USBPHY)		+= phy-samsung-usb.o
 obj-$(CONFIG_TWL6030_USB)		+= phy-twl6030-usb.o
 obj-$(CONFIG_USB_EHCI_TEGRA)		+= phy-tegra-usb.o
 obj-$(CONFIG_USB_GPIO_VBUS)		+= phy-gpio-vbus-usb.o
+obj-$(CONFIG_USB_HI6220_PHY)		+= phy-hi6220-usb.o
 obj-$(CONFIG_USB_ISP1301)		+= phy-isp1301.o
 obj-$(CONFIG_USB_MSM_OTG)		+= phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)		+= phy-mv-usb.o
diff --git a/drivers/usb/phy/phy-hi6220-usb.c b/drivers/usb/phy/phy-hi6220-usb.c
new file mode 100644
index 0000000..b251e85
--- /dev/null
+++ b/drivers/usb/phy/phy-hi6220-usb.c
@@ -0,0 +1,308 @@ 
+/*
+ * Copyright (c) 2015 Linaro Ltd.
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/otg.h>
+
+#define SC_PERIPH_CTRL4			0x00c
+
+#define CTRL4_PICO_SIDDQ		BIT(6)
+#define CTRL4_PICO_OGDISABLE		BIT(8)
+#define CTRL4_PICO_VBUSVLDEXT		BIT(10)
+#define CTRL4_PICO_VBUSVLDEXTSEL	BIT(11)
+#define CTRL4_OTG_PHY_SEL		BIT(21)
+
+#define SC_PERIPH_CTRL5			0x010
+
+#define CTRL5_USBOTG_RES_SEL		BIT(3)
+#define CTRL5_PICOPHY_ACAENB		BIT(4)
+#define CTRL5_PICOPHY_BC_MODE		BIT(5)
+#define CTRL5_PICOPHY_CHRGSEL		BIT(6)
+#define CTRL5_PICOPHY_VDATSRCEND	BIT(7)
+#define CTRL5_PICOPHY_VDATDETENB	BIT(8)
+#define CTRL5_PICOPHY_DCDENB		BIT(9)
+#define CTRL5_PICOPHY_IDDIG		BIT(10)
+
+#define SC_PERIPH_CTRL8			0x018
+#define SC_PERIPH_RSTEN0		0x300
+#define SC_PERIPH_RSTDIS0		0x304
+
+#define RST0_USBOTG_BUS			BIT(4)
+#define RST0_POR_PICOPHY		BIT(5)
+#define RST0_USBOTG			BIT(6)
+#define RST0_USBOTG_32K			BIT(7)
+
+#define EYE_PATTERN_PARA		0x7053348c
+
+struct hi6220_priv {
+	struct usb_phy phy;
+	struct delayed_work work;
+	struct regmap *reg;
+	struct clk *clk;
+	struct regulator *vcc;
+	struct device *dev;
+	int gpio_vbus;
+	int gpio_id;
+	enum usb_otg_state state;
+};
+
+static void hi6220_start_periphrals(struct hi6220_priv *priv, bool on)
+{
+	struct usb_otg *otg = priv->phy.otg;
+
+	if (!otg->gadget)
+		return;
+
+	if (on)
+		usb_gadget_connect(otg->gadget);
+	else
+		usb_gadget_disconnect(otg->gadget);
+}
+
+static void hi6220_detect_work(struct work_struct *work)
+{
+	struct hi6220_priv *priv =
+		container_of(work, struct hi6220_priv, work.work);
+	int gpio_id, gpio_vbus;
+	enum usb_otg_state state;
+
+	if (!gpio_is_valid(priv->gpio_id) || !gpio_is_valid(priv->gpio_vbus))
+		return;
+
+	gpio_id = gpio_get_value_cansleep(priv->gpio_id);
+	gpio_vbus = gpio_get_value_cansleep(priv->gpio_vbus);
+
+	if (gpio_vbus == 0) {
+		if (gpio_id == 1)
+			state = OTG_STATE_B_PERIPHERAL;
+		else
+			state = OTG_STATE_A_HOST;
+	} else {
+		state = OTG_STATE_A_HOST;
+	}
+
+	if (priv->state != state) {
+		hi6220_start_periphrals(priv, state == OTG_STATE_B_PERIPHERAL);
+		priv->state = state;
+	}
+}
+
+static irqreturn_t hiusb_gpio_intr(int irq, void *data)
+{
+	struct hi6220_priv *priv = (struct hi6220_priv *)data;
+
+	/* add debounce time */
+	schedule_delayed_work(&priv->work, msecs_to_jiffies(100));
+	return IRQ_HANDLED;
+}
+
+static int hi6220_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
+{
+	otg->gadget = gadget;
+	return 0;
+}
+
+static int hi6220_phy_setup(struct hi6220_priv *priv, bool on)
+{
+	struct regmap *reg = priv->reg;
+	u32 val, mask;
+	int ret;
+
+	if (priv->reg == NULL)
+		return 0;
+
+	if (on) {
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTDIS0, mask, val);
+		if (ret)
+			goto out;
+
+		ret = regmap_read(reg, SC_PERIPH_CTRL5, &val);
+		val = CTRL5_USBOTG_RES_SEL | CTRL5_PICOPHY_ACAENB;
+		mask = val | CTRL5_PICOPHY_BC_MODE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL5, mask, val);
+		if (ret)
+			goto out;
+
+		val =  CTRL4_PICO_VBUSVLDEXT | CTRL4_PICO_VBUSVLDEXTSEL |
+		       CTRL4_OTG_PHY_SEL;
+		mask = val | CTRL4_PICO_SIDDQ | CTRL4_PICO_OGDISABLE;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+
+		ret = regmap_write(reg, SC_PERIPH_CTRL8, EYE_PATTERN_PARA);
+		if (ret)
+			goto out;
+	} else {
+		val = CTRL4_PICO_SIDDQ;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_CTRL4, mask, val);
+		if (ret)
+			goto out;
+
+		ret = regmap_read(reg, SC_PERIPH_CTRL4, &val);
+		val = RST0_USBOTG_BUS | RST0_POR_PICOPHY |
+		      RST0_USBOTG | RST0_USBOTG_32K;
+		mask = val;
+		ret = regmap_update_bits(reg, SC_PERIPH_RSTEN0, mask, val);
+		if (ret)
+			goto out;
+	}
+
+	return 0;
+out:
+	dev_err(priv->dev, "failed to setup phy ret: %d\n", ret);
+	return ret;
+}
+
+static int hi6220_phy_probe(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv;
+	struct usb_otg *otg;
+	struct device_node *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	int ret, irq;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	priv->dev = dev;
+	priv->phy.dev = &pdev->dev;
+	priv->phy.otg = otg;
+	priv->phy.label = "hi6220";
+	priv->phy.type = USB_PHY_TYPE_USB2;
+	otg->set_peripheral = hi6220_set_peripheral;
+	platform_set_drvdata(pdev, priv);
+
+	priv->gpio_vbus = of_get_named_gpio(np, "hisilicon,gpio-vbus", 0);
+	if (priv->gpio_vbus == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_vbus)) {
+		dev_err(dev, "invalid gpio %d\n", priv->gpio_vbus);
+		return -ENODEV;
+	}
+
+	priv->gpio_id = of_get_named_gpio(np, "hisilicon,gpio-id", 0);
+	if (priv->gpio_id == -EPROBE_DEFER)
+		return -EPROBE_DEFER;
+	if (!gpio_is_valid(priv->gpio_id)) {
+		dev_err(dev, "invalid gpio %d\n", priv->gpio_id);
+		return -ENODEV;
+	}
+
+	priv->reg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+					"hisilicon,peripheral-syscon");
+	if (IS_ERR(priv->reg))
+		priv->reg = NULL;
+
+	ret = devm_gpio_request_one(dev, priv->gpio_vbus,
+				    GPIOF_IN, "gpio_vbus");
+	if (ret < 0) {
+		dev_err(dev, "gpio request failed for gpio_vbus\n");
+		return ret;
+	}
+
+	ret = devm_gpio_request_one(dev, priv->gpio_id, GPIOF_IN, "gpio_id");
+	if (ret < 0) {
+		dev_err(dev, "gpio request failed for gpio_id\n");
+		return ret;
+	}
+
+	priv->vcc = devm_regulator_get(dev, "vcc");
+	if (IS_ERR(priv->vcc)) {
+		if (PTR_ERR(priv->vcc) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_info(dev, "No regulator found\n");
+	} else {
+		ret = regulator_enable(priv->vcc);
+		if (ret) {
+			dev_err(dev, "Failed to enable regulator\n");
+			return -ENODEV;
+		}
+	}
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		regulator_disable(priv->vcc);
+		return PTR_ERR(priv->clk);
+	}
+	clk_prepare_enable(priv->clk);
+	INIT_DELAYED_WORK(&priv->work, hi6220_detect_work);
+
+	irq = gpio_to_irq(priv->gpio_vbus);
+	ret = devm_request_irq(dev, gpio_to_irq(priv->gpio_vbus),
+			       hiusb_gpio_intr, IRQF_NO_SUSPEND |
+			       IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			       "vbus_gpio_intr", priv);
+	if (ret) {
+		dev_err(dev, "request gpio irq failed.\n");
+		goto err_irq;
+	}
+
+	hi6220_phy_setup(priv, true);
+	ret = usb_add_phy_dev(&priv->phy);
+	if (ret) {
+		dev_err(dev, "Can't register transceiver\n");
+		goto err_irq;
+	}
+	schedule_delayed_work(&priv->work, 0);
+
+	return 0;
+err_irq:
+	cancel_delayed_work_sync(&priv->work);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return ret;
+}
+
+static int hi6220_phy_remove(struct platform_device *pdev)
+{
+	struct hi6220_priv *priv = platform_get_drvdata(pdev);
+
+	cancel_delayed_work_sync(&priv->work);
+	hi6220_phy_setup(priv, false);
+	clk_disable_unprepare(priv->clk);
+	regulator_disable(priv->vcc);
+	return 0;
+}
+
+static const struct of_device_id hi6220_phy_of_match[] = {
+	{.compatible = "hisilicon,hi6220-usb-phy",},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, hi6220_phy_of_match);
+
+static struct platform_driver hi6220_phy_driver = {
+	.probe	= hi6220_phy_probe,
+	.remove	= hi6220_phy_remove,
+	.driver = {
+		.name	= "hi6220-usb-phy",
+		.of_match_table	= hi6220_phy_of_match,
+	}
+};
+module_platform_driver(hi6220_phy_driver);
+
+MODULE_DESCRIPTION("HISILICON HI6220 USB PHY driver");
+MODULE_ALIAS("platform:hi6220-usb-phy");
+MODULE_LICENSE("GPL");