diff mbox

[08/12] ARM: DT: apq8064: Add USB OTG support for CM QS-600

Message ID 1424678152-13266-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Srinivas Kandagatla Feb. 23, 2015, 7:55 a.m. UTC 
From: Nicolas Dechesne <nicolas.dechesne@linaro.org>

This patch adds USB OTG support on USB1 for Compulab QS-600 Board.

Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Igor Grinberg Feb. 23, 2015, 11:31 a.m. UTC | #1 
On 02/23/15 09:55, Srinivas Kandagatla wrote:
> From: Nicolas Dechesne <nicolas.dechesne@linaro.org>
> 
> This patch adds USB OTG support on USB1 for Compulab QS-600 Board.
> 
> Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>

Acked-by: Igor Grinberg <grinberg@compulab.co.il>

> ---
>  arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> index af2e075..6349f24 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
> @@ -41,6 +41,11 @@
>  			};
>  		};
>  
> +		/* OTG */
> +		usb1_phy:phy@12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3_phy:phy@12520000 {
>  			status = "ok";
>  		};
> @@ -48,7 +53,16 @@
>  		usb4_phy:phy@12530000 {
>  			status = "ok";
>  		};
> -		
> +
> +		gadget1:gadget@12500000 {
> +			status = "ok";
> +		};
> +
> +		/* OTG */
> +		usb1: usb@12500000 {
> +			status = "ok";
> +		};
> +
>  		usb3: usb@12520000 {
>  			status = "ok";
>  		};
>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index af2e075..6349f24 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -41,6 +41,11 @@ 
 			};
 		};
 
+		/* OTG */
+		usb1_phy:phy@12500000 {
+			status = "ok";
+		};
+
 		usb3_phy:phy@12520000 {
 			status = "ok";
 		};
@@ -48,7 +53,16 @@ 
 		usb4_phy:phy@12530000 {
 			status = "ok";
 		};
-		
+
+		gadget1:gadget@12500000 {
+			status = "ok";
+		};
+
+		/* OTG */
+		usb1: usb@12500000 {
+			status = "ok";
+		};
+
 		usb3: usb@12520000 {
 			status = "ok";
 		};