Message ID | 1424878582-26397-4-git-send-email-alex.bennee@linaro.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Wed, 25 Feb 2015 15:36:21 +0000 Alex Bennée <alex.bennee@linaro.org> wrote: Alex, Christoffer, > From: Christoffer Dall <christoffer.dall@linaro.org> > > When a VCPU is no longer running, we currently check to see if it has > a timer scheduled in the future, and if it does, we schedule a host > hrtimer to notify is in case the timer expires while the VCPU is still > not running. When the hrtimer fires, we mask the guest's timer and > inject the timer IRQ (still relying on the guest unmasking the time > when it receives the IRQ). > > This is all good and fine, but when migration a VM > (checkpoint/restore) this introduces a race. It is unlikely, but > possible, for the following sequence of events to happen: > > 1. Userspace stops the VM > 2. Hrtimer for VCPU is scheduled > 3. Userspace checkpoints the VGIC state (no pending timer interrupts) > 4. The hrtimer fires, schedules work in a workqueue > 5. Workqueue function runs, masks the timer and injects timer > interrupt 6. Userspace checkpoints the timer state (timer masked) > > At restore time, you end up with a masked timer without any timer > interrupts and your guest halts never receiving timer interrupts. > > Fix this by only kicking the VCPU in the workqueue function, and > sample the expired state of the timer when entering the guest again > and inject the interrupt and mask the timer only then. > > Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c > index 8531536..f7fd76e 100644 > --- a/arch/arm/kvm/arm.c > +++ b/arch/arm/kvm/arm.c > @@ -269,7 +269,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) > > int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) > { > - return 0; > + return kvm_timer_should_fire(vcpu); > } > > int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) > diff --git a/include/kvm/arm_arch_timer.h > b/include/kvm/arm_arch_timer.h index b3f45a5..98cc9f4 100644 > --- a/include/kvm/arm_arch_timer.h > +++ b/include/kvm/arm_arch_timer.h > @@ -72,6 +72,8 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu > *vcpu); u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid); > int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value); > > +bool kvm_timer_should_fire(struct kvm_vcpu *vcpu); > + > #else > static inline int kvm_timer_hyp_init(void) > { > @@ -96,6 +98,11 @@ static inline u64 kvm_arm_timer_get_reg(struct > kvm_vcpu *vcpu, u64 regid) { > return 0; > } > + > +static inline bool kvm_timer_should_fire(struct kvm_vcpu *vcpu) > +{ > + return false; > +} > #endif > > #endif > diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c > index 6e54f35..98c95f2 100644 > --- a/virt/kvm/arm/arch_timer.c > +++ b/virt/kvm/arm/arch_timer.c > @@ -85,13 +85,22 @@ static irqreturn_t kvm_arch_timer_handler(int > irq, void *dev_id) return IRQ_HANDLED; > } > > +/* > + * Work function for handling the backup timer that we schedule when > a vcpu is > + * no longer running, but had a timer programmed to fire in the > future. > + */ > static void kvm_timer_inject_irq_work(struct work_struct *work) > { > struct kvm_vcpu *vcpu; > > vcpu = container_of(work, struct kvm_vcpu, > arch.timer_cpu.expired); vcpu->arch.timer_cpu.armed = false; > - kvm_timer_inject_irq(vcpu); > + > + /* > + * If the vcpu is blocked we want to wake it up so that it > will see > + * the timer has expired when entering the guest. > + */ > + kvm_vcpu_kick(vcpu); > } > > static enum hrtimer_restart kvm_timer_expire(struct hrtimer *hrt) > @@ -102,6 +111,21 @@ static enum hrtimer_restart > kvm_timer_expire(struct hrtimer *hrt) return HRTIMER_NORESTART; > } > > +bool kvm_timer_should_fire(struct kvm_vcpu *vcpu) > +{ > + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; > + cycle_t cval, now; > + > + if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || > + !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) > + return false; > + > + cval = timer->cntv_cval; > + now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; > + > + return cval <= now; > +} > + > /** > * kvm_timer_flush_hwstate - prepare to move the virt timer to the > cpu > * @vcpu: The vcpu pointer > @@ -119,6 +143,13 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu > *vcpu) > * populate the CPU timer again. > */ > timer_disarm(timer); > + > + /* > + * If the timer expired while we were not scheduled, now is > the time > + * to inject it. > + */ > + if (kvm_timer_should_fire(vcpu)) > + kvm_timer_inject_irq(vcpu); > } > > /** > @@ -134,16 +165,9 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu > *vcpu) cycle_t cval, now; > u64 ns; > > - if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || > - !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) > - return; > - > - cval = timer->cntv_cval; > - now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; > - > BUG_ON(timer_is_armed(timer)); > > - if (cval <= now) { > + if (kvm_timer_should_fire(vcpu)) { > /* > * Timer has already expired while we were not > * looking. Inject the interrupt and carry on. > @@ -152,6 +176,9 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) > return; > } > > + cval = timer->cntv_cval; > + now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; > + > ns = cyclecounter_cyc2ns(timecounter->cc, cval - now, > timecounter->mask, &timecounter->frac); > timer_arm(timer, ns); So the first half of the patch looks perfectly OK to me... > diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c > index af6a521..3b4ded2 100644 > --- a/virt/kvm/arm/vgic.c > +++ b/virt/kvm/arm/vgic.c > @@ -263,6 +263,13 @@ static int vgic_irq_is_queued(struct kvm_vcpu > *vcpu, int irq) return vgic_bitmap_get_irq_val(&dist->irq_queued, > vcpu->vcpu_id, irq); } > > +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) > +{ > + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; > + > + return vgic_bitmap_get_irq_val(&dist->irq_active, > vcpu->vcpu_id, irq); +} > + > static void vgic_irq_set_queued(struct kvm_vcpu *vcpu, int irq) > { > struct vgic_dist *dist = &vcpu->kvm->arch.vgic; > @@ -285,6 +292,13 @@ static void vgic_irq_set_active(struct kvm_vcpu > *vcpu, int irq) vgic_bitmap_set_irq_val(&dist->irq_active, > vcpu->vcpu_id, irq, 1); } > > +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) > +{ > + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; > + > + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, > irq, 0); +} > + > static int vgic_dist_irq_get_level(struct kvm_vcpu *vcpu, int irq) > { > struct vgic_dist *dist = &vcpu->kvm->arch.vgic; > @@ -634,16 +648,12 @@ bool vgic_handle_cfg_reg(u32 *reg, struct > kvm_exit_mmio *mmio, } > > /** > - * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor > + * vgic_unqueue_irqs - move pending/active IRQs from LRs to the > distributor > * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs > * > - * Move any pending IRQs that have already been assigned to LRs back > to the > + * Move any IRQs that have already been assigned to LRs back to the > * emulated distributor state so that the complete emulated state > can be read > * from the main emulation structures without investigating the LRs. > - * > - * Note that IRQs in the active state in the LRs get their pending > state moved > - * to the distributor but the active state stays in the LRs, because > we don't > - * track the active state on the distributor side. > */ > void vgic_unqueue_irqs(struct kvm_vcpu *vcpu) > { > @@ -919,7 +929,7 @@ static int compute_pending_for_cpu(struct > kvm_vcpu *vcpu) > /* > * Update the interrupt state and determine which CPUs have pending > - * interrupts. Must be called with distributor lock held. > + * or active interrupts. Must be called with distributor lock held. > */ > void vgic_update_state(struct kvm *kvm) > { > @@ -1036,6 +1046,25 @@ static void vgic_retire_disabled_irqs(struct > kvm_vcpu *vcpu) } > } > > +static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, > + int lr_nr, struct vgic_lr vlr) > +{ > + if (vgic_irq_is_active(vcpu, irq)) { > + vlr.state |= LR_STATE_ACTIVE; > + kvm_debug("Set active, clear distributor: 0x%x\n", > vlr.state); > + vgic_irq_clear_active(vcpu, irq); > + vgic_update_state(vcpu->kvm); > + } else if (vgic_dist_irq_is_pending(vcpu, irq)) { > + vlr.state |= LR_STATE_PENDING; > + kvm_debug("Set pending: 0x%x\n", vlr.state); > + } > + > + if (!vgic_irq_is_edge(vcpu, irq)) > + vlr.state |= LR_EOI_INT; > + > + vgic_set_lr(vcpu, lr_nr, vlr); > +} > + > /* > * Queue an interrupt to a CPU virtual interface. Return true on > success, > * or false if it wasn't possible to queue it. > @@ -1063,8 +1092,7 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 > sgi_source_id, int irq) if (vlr.source == sgi_source_id) { > kvm_debug("LR%d piggyback for IRQ%d\n", lr, > vlr.irq); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); > - vlr.state |= LR_STATE_PENDING; > - vgic_set_lr(vcpu, lr, vlr); > + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); > return true; > } > } > @@ -1081,11 +1109,8 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 > sgi_source_id, int irq) > vlr.irq = irq; > vlr.source = sgi_source_id; > - vlr.state = LR_STATE_PENDING; > - if (!vgic_irq_is_edge(vcpu, irq)) > - vlr.state |= LR_EOI_INT; > - > - vgic_set_lr(vcpu, lr, vlr); > + vlr.state = 0; > + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); > > return true; > } ... but this whole vgic rework seems rather out of place, and I can't really see its connection with the timer. Isn't it logically part of the previous patch? Thanks, M.
Marc Zyngier <marc.zyngier@arm.com> writes: > On Wed, 25 Feb 2015 15:36:21 +0000 > Alex Bennée <alex.bennee@linaro.org> wrote: > > Alex, Christoffer, > <snip> > > So the first half of the patch looks perfectly OK to me... > >> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c >> index af6a521..3b4ded2 100644 >> --- a/virt/kvm/arm/vgic.c >> +++ b/virt/kvm/arm/vgic.c >> @@ -263,6 +263,13 @@ static int vgic_irq_is_queued(struct kvm_vcpu >> *vcpu, int irq) return vgic_bitmap_get_irq_val(&dist->irq_queued, >> vcpu->vcpu_id, irq); } >> >> +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) >> +{ >> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> + >> + return vgic_bitmap_get_irq_val(&dist->irq_active, >> vcpu->vcpu_id, irq); +} >> + >> static void vgic_irq_set_queued(struct kvm_vcpu *vcpu, int irq) >> { >> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> @@ -285,6 +292,13 @@ static void vgic_irq_set_active(struct kvm_vcpu >> *vcpu, int irq) vgic_bitmap_set_irq_val(&dist->irq_active, >> vcpu->vcpu_id, irq, 1); } >> >> +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) >> +{ >> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> + >> + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, >> irq, 0); +} >> + >> static int vgic_dist_irq_get_level(struct kvm_vcpu *vcpu, int irq) >> { >> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >> @@ -634,16 +648,12 @@ bool vgic_handle_cfg_reg(u32 *reg, struct >> kvm_exit_mmio *mmio, } >> >> /** >> - * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor >> + * vgic_unqueue_irqs - move pending/active IRQs from LRs to the >> distributor >> * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs >> * >> - * Move any pending IRQs that have already been assigned to LRs back >> to the >> + * Move any IRQs that have already been assigned to LRs back to the >> * emulated distributor state so that the complete emulated state >> can be read >> * from the main emulation structures without investigating the LRs. >> - * >> - * Note that IRQs in the active state in the LRs get their pending >> state moved >> - * to the distributor but the active state stays in the LRs, because >> we don't >> - * track the active state on the distributor side. >> */ >> void vgic_unqueue_irqs(struct kvm_vcpu *vcpu) >> { >> @@ -919,7 +929,7 @@ static int compute_pending_for_cpu(struct >> kvm_vcpu *vcpu) >> /* >> * Update the interrupt state and determine which CPUs have pending >> - * interrupts. Must be called with distributor lock held. >> + * or active interrupts. Must be called with distributor lock held. >> */ >> void vgic_update_state(struct kvm *kvm) >> { >> @@ -1036,6 +1046,25 @@ static void vgic_retire_disabled_irqs(struct >> kvm_vcpu *vcpu) } >> } >> >> +static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, >> + int lr_nr, struct vgic_lr vlr) >> +{ >> + if (vgic_irq_is_active(vcpu, irq)) { >> + vlr.state |= LR_STATE_ACTIVE; >> + kvm_debug("Set active, clear distributor: 0x%x\n", >> vlr.state); >> + vgic_irq_clear_active(vcpu, irq); >> + vgic_update_state(vcpu->kvm); >> + } else if (vgic_dist_irq_is_pending(vcpu, irq)) { >> + vlr.state |= LR_STATE_PENDING; >> + kvm_debug("Set pending: 0x%x\n", vlr.state); >> + } >> + >> + if (!vgic_irq_is_edge(vcpu, irq)) >> + vlr.state |= LR_EOI_INT; >> + >> + vgic_set_lr(vcpu, lr_nr, vlr); >> +} >> + >> /* >> * Queue an interrupt to a CPU virtual interface. Return true on >> success, >> * or false if it wasn't possible to queue it. >> @@ -1063,8 +1092,7 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >> sgi_source_id, int irq) if (vlr.source == sgi_source_id) { >> kvm_debug("LR%d piggyback for IRQ%d\n", lr, >> vlr.irq); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); >> - vlr.state |= LR_STATE_PENDING; >> - vgic_set_lr(vcpu, lr, vlr); >> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >> return true; >> } >> } >> @@ -1081,11 +1109,8 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >> sgi_source_id, int irq) >> vlr.irq = irq; >> vlr.source = sgi_source_id; >> - vlr.state = LR_STATE_PENDING; >> - if (!vgic_irq_is_edge(vcpu, irq)) >> - vlr.state |= LR_EOI_INT; >> - >> - vgic_set_lr(vcpu, lr, vlr); >> + vlr.state = 0; >> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >> >> return true; >> } > > > ... but this whole vgic rework seems rather out of place, and I can't > really see its connection with the timer. Isn't it logically part of the > previous patch? Probably - I was going to re-factor that code with the original patch but it was on the todo list once we had it working. Christoffer than cleaned it up when he fixed the race hence it being here. Would you like it as a separate patch (between 2 and 3) or just rolled into the previous patch? > > Thanks, > > M.
On 02/03/15 08:50, Alex Bennée wrote: > > Marc Zyngier <marc.zyngier@arm.com> writes: > >> On Wed, 25 Feb 2015 15:36:21 +0000 >> Alex Bennée <alex.bennee@linaro.org> wrote: >> >> Alex, Christoffer, >> > <snip> >> >> So the first half of the patch looks perfectly OK to me... >> >>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c >>> index af6a521..3b4ded2 100644 >>> --- a/virt/kvm/arm/vgic.c >>> +++ b/virt/kvm/arm/vgic.c >>> @@ -263,6 +263,13 @@ static int vgic_irq_is_queued(struct kvm_vcpu >>> *vcpu, int irq) return vgic_bitmap_get_irq_val(&dist->irq_queued, >>> vcpu->vcpu_id, irq); } >>> >>> +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) >>> +{ >>> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>> + >>> + return vgic_bitmap_get_irq_val(&dist->irq_active, >>> vcpu->vcpu_id, irq); +} >>> + >>> static void vgic_irq_set_queued(struct kvm_vcpu *vcpu, int irq) >>> { >>> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>> @@ -285,6 +292,13 @@ static void vgic_irq_set_active(struct kvm_vcpu >>> *vcpu, int irq) vgic_bitmap_set_irq_val(&dist->irq_active, >>> vcpu->vcpu_id, irq, 1); } >>> >>> +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) >>> +{ >>> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>> + >>> + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, >>> irq, 0); +} >>> + >>> static int vgic_dist_irq_get_level(struct kvm_vcpu *vcpu, int irq) >>> { >>> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>> @@ -634,16 +648,12 @@ bool vgic_handle_cfg_reg(u32 *reg, struct >>> kvm_exit_mmio *mmio, } >>> >>> /** >>> - * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor >>> + * vgic_unqueue_irqs - move pending/active IRQs from LRs to the >>> distributor >>> * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs >>> * >>> - * Move any pending IRQs that have already been assigned to LRs back >>> to the >>> + * Move any IRQs that have already been assigned to LRs back to the >>> * emulated distributor state so that the complete emulated state >>> can be read >>> * from the main emulation structures without investigating the LRs. >>> - * >>> - * Note that IRQs in the active state in the LRs get their pending >>> state moved >>> - * to the distributor but the active state stays in the LRs, because >>> we don't >>> - * track the active state on the distributor side. >>> */ >>> void vgic_unqueue_irqs(struct kvm_vcpu *vcpu) >>> { >>> @@ -919,7 +929,7 @@ static int compute_pending_for_cpu(struct >>> kvm_vcpu *vcpu) >>> /* >>> * Update the interrupt state and determine which CPUs have pending >>> - * interrupts. Must be called with distributor lock held. >>> + * or active interrupts. Must be called with distributor lock held. >>> */ >>> void vgic_update_state(struct kvm *kvm) >>> { >>> @@ -1036,6 +1046,25 @@ static void vgic_retire_disabled_irqs(struct >>> kvm_vcpu *vcpu) } >>> } >>> >>> +static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, >>> + int lr_nr, struct vgic_lr vlr) >>> +{ >>> + if (vgic_irq_is_active(vcpu, irq)) { >>> + vlr.state |= LR_STATE_ACTIVE; >>> + kvm_debug("Set active, clear distributor: 0x%x\n", >>> vlr.state); >>> + vgic_irq_clear_active(vcpu, irq); >>> + vgic_update_state(vcpu->kvm); >>> + } else if (vgic_dist_irq_is_pending(vcpu, irq)) { >>> + vlr.state |= LR_STATE_PENDING; >>> + kvm_debug("Set pending: 0x%x\n", vlr.state); >>> + } >>> + >>> + if (!vgic_irq_is_edge(vcpu, irq)) >>> + vlr.state |= LR_EOI_INT; >>> + >>> + vgic_set_lr(vcpu, lr_nr, vlr); >>> +} >>> + >>> /* >>> * Queue an interrupt to a CPU virtual interface. Return true on >>> success, >>> * or false if it wasn't possible to queue it. >>> @@ -1063,8 +1092,7 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >>> sgi_source_id, int irq) if (vlr.source == sgi_source_id) { >>> kvm_debug("LR%d piggyback for IRQ%d\n", lr, >>> vlr.irq); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); >>> - vlr.state |= LR_STATE_PENDING; >>> - vgic_set_lr(vcpu, lr, vlr); >>> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >>> return true; >>> } >>> } >>> @@ -1081,11 +1109,8 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >>> sgi_source_id, int irq) >>> vlr.irq = irq; >>> vlr.source = sgi_source_id; >>> - vlr.state = LR_STATE_PENDING; >>> - if (!vgic_irq_is_edge(vcpu, irq)) >>> - vlr.state |= LR_EOI_INT; >>> - >>> - vgic_set_lr(vcpu, lr, vlr); >>> + vlr.state = 0; >>> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >>> >>> return true; >>> } >> >> >> ... but this whole vgic rework seems rather out of place, and I can't >> really see its connection with the timer. Isn't it logically part of the >> previous patch? > > Probably - I was going to re-factor that code with the original patch > but it was on the todo list once we had it working. Christoffer than > cleaned it up when he fixed the race hence it being here. > > Would you like it as a separate patch (between 2 and 3) or just rolled > into the previous patch? In general, I prefer smaller patches (keeps the few brain cells left from overheating), so if these changes make sense on their own, please post them as a separate patch. Thanks, M.
Marc Zyngier <marc.zyngier@arm.com> writes: > On 02/03/15 08:50, Alex Bennée wrote: >> >> Marc Zyngier <marc.zyngier@arm.com> writes: >> >>> On Wed, 25 Feb 2015 15:36:21 +0000 >>> Alex Bennée <alex.bennee@linaro.org> wrote: >>> >>> Alex, Christoffer, >>> >> <snip> >>> >>> So the first half of the patch looks perfectly OK to me... >>> >>>> diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c >>>> index af6a521..3b4ded2 100644 >>>> --- a/virt/kvm/arm/vgic.c >>>> +++ b/virt/kvm/arm/vgic.c >>>> @@ -263,6 +263,13 @@ static int vgic_irq_is_queued(struct kvm_vcpu >>>> *vcpu, int irq) return vgic_bitmap_get_irq_val(&dist->irq_queued, >>>> vcpu->vcpu_id, irq); } >>>> >>>> +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) >>>> +{ >>>> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>>> + >>>> + return vgic_bitmap_get_irq_val(&dist->irq_active, >>>> vcpu->vcpu_id, irq); +} >>>> + >>>> static void vgic_irq_set_queued(struct kvm_vcpu *vcpu, int irq) >>>> { >>>> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>>> @@ -285,6 +292,13 @@ static void vgic_irq_set_active(struct kvm_vcpu >>>> *vcpu, int irq) vgic_bitmap_set_irq_val(&dist->irq_active, >>>> vcpu->vcpu_id, irq, 1); } >>>> >>>> +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) >>>> +{ >>>> + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>>> + >>>> + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, >>>> irq, 0); +} >>>> + >>>> static int vgic_dist_irq_get_level(struct kvm_vcpu *vcpu, int irq) >>>> { >>>> struct vgic_dist *dist = &vcpu->kvm->arch.vgic; >>>> @@ -634,16 +648,12 @@ bool vgic_handle_cfg_reg(u32 *reg, struct >>>> kvm_exit_mmio *mmio, } >>>> >>>> /** >>>> - * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor >>>> + * vgic_unqueue_irqs - move pending/active IRQs from LRs to the >>>> distributor >>>> * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs >>>> * >>>> - * Move any pending IRQs that have already been assigned to LRs back >>>> to the >>>> + * Move any IRQs that have already been assigned to LRs back to the >>>> * emulated distributor state so that the complete emulated state >>>> can be read >>>> * from the main emulation structures without investigating the LRs. >>>> - * >>>> - * Note that IRQs in the active state in the LRs get their pending >>>> state moved >>>> - * to the distributor but the active state stays in the LRs, because >>>> we don't >>>> - * track the active state on the distributor side. >>>> */ >>>> void vgic_unqueue_irqs(struct kvm_vcpu *vcpu) >>>> { >>>> @@ -919,7 +929,7 @@ static int compute_pending_for_cpu(struct >>>> kvm_vcpu *vcpu) >>>> /* >>>> * Update the interrupt state and determine which CPUs have pending >>>> - * interrupts. Must be called with distributor lock held. >>>> + * or active interrupts. Must be called with distributor lock held. >>>> */ >>>> void vgic_update_state(struct kvm *kvm) >>>> { >>>> @@ -1036,6 +1046,25 @@ static void vgic_retire_disabled_irqs(struct >>>> kvm_vcpu *vcpu) } >>>> } >>>> >>>> +static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, >>>> + int lr_nr, struct vgic_lr vlr) >>>> +{ >>>> + if (vgic_irq_is_active(vcpu, irq)) { >>>> + vlr.state |= LR_STATE_ACTIVE; >>>> + kvm_debug("Set active, clear distributor: 0x%x\n", >>>> vlr.state); >>>> + vgic_irq_clear_active(vcpu, irq); >>>> + vgic_update_state(vcpu->kvm); >>>> + } else if (vgic_dist_irq_is_pending(vcpu, irq)) { >>>> + vlr.state |= LR_STATE_PENDING; >>>> + kvm_debug("Set pending: 0x%x\n", vlr.state); >>>> + } >>>> + >>>> + if (!vgic_irq_is_edge(vcpu, irq)) >>>> + vlr.state |= LR_EOI_INT; >>>> + >>>> + vgic_set_lr(vcpu, lr_nr, vlr); >>>> +} >>>> + >>>> /* >>>> * Queue an interrupt to a CPU virtual interface. Return true on >>>> success, >>>> * or false if it wasn't possible to queue it. >>>> @@ -1063,8 +1092,7 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >>>> sgi_source_id, int irq) if (vlr.source == sgi_source_id) { >>>> kvm_debug("LR%d piggyback for IRQ%d\n", lr, >>>> vlr.irq); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); >>>> - vlr.state |= LR_STATE_PENDING; >>>> - vgic_set_lr(vcpu, lr, vlr); >>>> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >>>> return true; >>>> } >>>> } >>>> @@ -1081,11 +1109,8 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 >>>> sgi_source_id, int irq) >>>> vlr.irq = irq; >>>> vlr.source = sgi_source_id; >>>> - vlr.state = LR_STATE_PENDING; >>>> - if (!vgic_irq_is_edge(vcpu, irq)) >>>> - vlr.state |= LR_EOI_INT; >>>> - >>>> - vgic_set_lr(vcpu, lr, vlr); >>>> + vlr.state = 0; >>>> + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); >>>> >>>> return true; >>>> } >>> >>> >>> ... but this whole vgic rework seems rather out of place, and I can't >>> really see its connection with the timer. Isn't it logically part of the >>> previous patch? >> >> Probably - I was going to re-factor that code with the original patch >> but it was on the todo list once we had it working. Christoffer than >> cleaned it up when he fixed the race hence it being here. >> >> Would you like it as a separate patch (between 2 and 3) or just rolled >> into the previous patch? > > In general, I prefer smaller patches (keeps the few brain cells left > from overheating), so if these changes make sense on their own, please > post them as a separate patch. Done, new series re-sent. > > Thanks, > > M.
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 8531536..f7fd76e 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -269,7 +269,7 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu) { - return 0; + return kvm_timer_should_fire(vcpu); } int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) diff --git a/include/kvm/arm_arch_timer.h b/include/kvm/arm_arch_timer.h index b3f45a5..98cc9f4 100644 --- a/include/kvm/arm_arch_timer.h +++ b/include/kvm/arm_arch_timer.h @@ -72,6 +72,8 @@ void kvm_timer_vcpu_terminate(struct kvm_vcpu *vcpu); u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid); int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value); +bool kvm_timer_should_fire(struct kvm_vcpu *vcpu); + #else static inline int kvm_timer_hyp_init(void) { @@ -96,6 +98,11 @@ static inline u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid) { return 0; } + +static inline bool kvm_timer_should_fire(struct kvm_vcpu *vcpu) +{ + return false; +} #endif #endif diff --git a/virt/kvm/arm/arch_timer.c b/virt/kvm/arm/arch_timer.c index 6e54f35..98c95f2 100644 --- a/virt/kvm/arm/arch_timer.c +++ b/virt/kvm/arm/arch_timer.c @@ -85,13 +85,22 @@ static irqreturn_t kvm_arch_timer_handler(int irq, void *dev_id) return IRQ_HANDLED; } +/* + * Work function for handling the backup timer that we schedule when a vcpu is + * no longer running, but had a timer programmed to fire in the future. + */ static void kvm_timer_inject_irq_work(struct work_struct *work) { struct kvm_vcpu *vcpu; vcpu = container_of(work, struct kvm_vcpu, arch.timer_cpu.expired); vcpu->arch.timer_cpu.armed = false; - kvm_timer_inject_irq(vcpu); + + /* + * If the vcpu is blocked we want to wake it up so that it will see + * the timer has expired when entering the guest. + */ + kvm_vcpu_kick(vcpu); } static enum hrtimer_restart kvm_timer_expire(struct hrtimer *hrt) @@ -102,6 +111,21 @@ static enum hrtimer_restart kvm_timer_expire(struct hrtimer *hrt) return HRTIMER_NORESTART; } +bool kvm_timer_should_fire(struct kvm_vcpu *vcpu) +{ + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu; + cycle_t cval, now; + + if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || + !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) + return false; + + cval = timer->cntv_cval; + now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; + + return cval <= now; +} + /** * kvm_timer_flush_hwstate - prepare to move the virt timer to the cpu * @vcpu: The vcpu pointer @@ -119,6 +143,13 @@ void kvm_timer_flush_hwstate(struct kvm_vcpu *vcpu) * populate the CPU timer again. */ timer_disarm(timer); + + /* + * If the timer expired while we were not scheduled, now is the time + * to inject it. + */ + if (kvm_timer_should_fire(vcpu)) + kvm_timer_inject_irq(vcpu); } /** @@ -134,16 +165,9 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) cycle_t cval, now; u64 ns; - if ((timer->cntv_ctl & ARCH_TIMER_CTRL_IT_MASK) || - !(timer->cntv_ctl & ARCH_TIMER_CTRL_ENABLE)) - return; - - cval = timer->cntv_cval; - now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; - BUG_ON(timer_is_armed(timer)); - if (cval <= now) { + if (kvm_timer_should_fire(vcpu)) { /* * Timer has already expired while we were not * looking. Inject the interrupt and carry on. @@ -152,6 +176,9 @@ void kvm_timer_sync_hwstate(struct kvm_vcpu *vcpu) return; } + cval = timer->cntv_cval; + now = kvm_phys_timer_read() - vcpu->kvm->arch.timer.cntvoff; + ns = cyclecounter_cyc2ns(timecounter->cc, cval - now, timecounter->mask, &timecounter->frac); timer_arm(timer, ns); diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c index af6a521..3b4ded2 100644 --- a/virt/kvm/arm/vgic.c +++ b/virt/kvm/arm/vgic.c @@ -263,6 +263,13 @@ static int vgic_irq_is_queued(struct kvm_vcpu *vcpu, int irq) return vgic_bitmap_get_irq_val(&dist->irq_queued, vcpu->vcpu_id, irq); } +static int vgic_irq_is_active(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + return vgic_bitmap_get_irq_val(&dist->irq_active, vcpu->vcpu_id, irq); +} + static void vgic_irq_set_queued(struct kvm_vcpu *vcpu, int irq) { struct vgic_dist *dist = &vcpu->kvm->arch.vgic; @@ -285,6 +292,13 @@ static void vgic_irq_set_active(struct kvm_vcpu *vcpu, int irq) vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, irq, 1); } +static void vgic_irq_clear_active(struct kvm_vcpu *vcpu, int irq) +{ + struct vgic_dist *dist = &vcpu->kvm->arch.vgic; + + vgic_bitmap_set_irq_val(&dist->irq_active, vcpu->vcpu_id, irq, 0); +} + static int vgic_dist_irq_get_level(struct kvm_vcpu *vcpu, int irq) { struct vgic_dist *dist = &vcpu->kvm->arch.vgic; @@ -634,16 +648,12 @@ bool vgic_handle_cfg_reg(u32 *reg, struct kvm_exit_mmio *mmio, } /** - * vgic_unqueue_irqs - move pending IRQs from LRs to the distributor + * vgic_unqueue_irqs - move pending/active IRQs from LRs to the distributor * @vgic_cpu: Pointer to the vgic_cpu struct holding the LRs * - * Move any pending IRQs that have already been assigned to LRs back to the + * Move any IRQs that have already been assigned to LRs back to the * emulated distributor state so that the complete emulated state can be read * from the main emulation structures without investigating the LRs. - * - * Note that IRQs in the active state in the LRs get their pending state moved - * to the distributor but the active state stays in the LRs, because we don't - * track the active state on the distributor side. */ void vgic_unqueue_irqs(struct kvm_vcpu *vcpu) { @@ -919,7 +929,7 @@ static int compute_pending_for_cpu(struct kvm_vcpu *vcpu) /* * Update the interrupt state and determine which CPUs have pending - * interrupts. Must be called with distributor lock held. + * or active interrupts. Must be called with distributor lock held. */ void vgic_update_state(struct kvm *kvm) { @@ -1036,6 +1046,25 @@ static void vgic_retire_disabled_irqs(struct kvm_vcpu *vcpu) } } +static void vgic_queue_irq_to_lr(struct kvm_vcpu *vcpu, int irq, + int lr_nr, struct vgic_lr vlr) +{ + if (vgic_irq_is_active(vcpu, irq)) { + vlr.state |= LR_STATE_ACTIVE; + kvm_debug("Set active, clear distributor: 0x%x\n", vlr.state); + vgic_irq_clear_active(vcpu, irq); + vgic_update_state(vcpu->kvm); + } else if (vgic_dist_irq_is_pending(vcpu, irq)) { + vlr.state |= LR_STATE_PENDING; + kvm_debug("Set pending: 0x%x\n", vlr.state); + } + + if (!vgic_irq_is_edge(vcpu, irq)) + vlr.state |= LR_EOI_INT; + + vgic_set_lr(vcpu, lr_nr, vlr); +} + /* * Queue an interrupt to a CPU virtual interface. Return true on success, * or false if it wasn't possible to queue it. @@ -1063,8 +1092,7 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) if (vlr.source == sgi_source_id) { kvm_debug("LR%d piggyback for IRQ%d\n", lr, vlr.irq); BUG_ON(!test_bit(lr, vgic_cpu->lr_used)); - vlr.state |= LR_STATE_PENDING; - vgic_set_lr(vcpu, lr, vlr); + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); return true; } } @@ -1081,11 +1109,8 @@ bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq) vlr.irq = irq; vlr.source = sgi_source_id; - vlr.state = LR_STATE_PENDING; - if (!vgic_irq_is_edge(vcpu, irq)) - vlr.state |= LR_EOI_INT; - - vgic_set_lr(vcpu, lr, vlr); + vlr.state = 0; + vgic_queue_irq_to_lr(vcpu, irq, lr, vlr); return true; }