diff mbox

drm: atmel-hlcdc: remove clock polarity from crtc driver

Message ID 1424886291-15747-1-git-send-email-nicolas.ferre@atmel.com (mailing list archive)
State New, archived
Headers show

Commit Message

Nicolas Ferre Feb. 25, 2015, 5:44 p.m. UTC 
Remove this configuration bit in crtc driver as the rising edge clock is widely
used.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Boris BREZILLON Feb. 26, 2015, 1:21 p.m. UTC | #1 
On Wed, 25 Feb 2015 18:44:51 +0100
Nicolas Ferre <nicolas.ferre@atmel.com> wrote:

> Remove this configuration bit in crtc driver as the rising edge clock is widely
> used.

Applied to drm-atmel-hlcdc-fixes.

Thanks,

Boris

> 
> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 0409b907de5d..b3e3068c6ec0 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -153,7 +153,7 @@ static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *c,
>  		     (adj->crtc_hdisplay - 1) |
>  		     ((adj->crtc_vdisplay - 1) << 16));
>  
> -	cfg = ATMEL_HLCDC_CLKPOL;
> +	cfg = 0;
>  
>  	prate = clk_get_rate(crtc->dc->hlcdc->sys_clk);
>  	mode_rate = mode->crtc_clock * 1000;
diff mbox

Patch

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 0409b907de5d..b3e3068c6ec0 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -153,7 +153,7 @@  static int atmel_hlcdc_crtc_mode_set(struct drm_crtc *c,
 		     (adj->crtc_hdisplay - 1) |
 		     ((adj->crtc_vdisplay - 1) << 16));
 
-	cfg = ATMEL_HLCDC_CLKPOL;
+	cfg = 0;
 
 	prate = clk_get_rate(crtc->dc->hlcdc->sys_clk);
 	mode_rate = mode->crtc_clock * 1000;