diff mbox

[2/2] dt-bindings: cpufreq: document for hisilicon acpu driver

Message ID 1424956899-8891-3-git-send-email-leo.yan@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Leo Yan Feb. 26, 2015, 1:21 p.m. UTC
This adds documentation for hisilicon acpu's cpufreq driver.

OPP library is used for device tree parsing to get frequency list;
Furthermore, this driver can bind all CPUs to change frequency together,
or the two clusters can trigger the frequency change independently. This
is controlled by the dtb flag "hisilicon,coupled-clusters".

Signed-off-by: Leo Yan <leo.yan@linaro.org>
---
 .../bindings/cpufreq/cpufreq-hisi-acpu.txt         | 112 +++++++++++++++++++++
 1 file changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-hisi-acpu.txt

Comments

Viresh Kumar March 2, 2015, 6:16 a.m. UTC | #1
For bindings you need to cc DT list, cc'd now..

On 26 February 2015 at 18:51, Leo Yan <leo.yan@linaro.org> wrote:
> This adds documentation for hisilicon acpu's cpufreq driver.
>
> OPP library is used for device tree parsing to get frequency list;
> Furthermore, this driver can bind all CPUs to change frequency together,
> or the two clusters can trigger the frequency change independently. This
> is controlled by the dtb flag "hisilicon,coupled-clusters".
>
> Signed-off-by: Leo Yan <leo.yan@linaro.org>
> ---
>  .../bindings/cpufreq/cpufreq-hisi-acpu.txt         | 112 +++++++++++++++++++++
>  1 file changed, 112 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-hisi-acpu.txt

Bindings must be added before using them and so this patch should have been 1/2.
Apart from that, it looks like you can reuse cpufreq-dt easily without
much trouble.


> +- hisilicon,coupled-clusters: Specify whether all clusters share one clock
> +       source. This must be defined under node cpufreq.

> +cpufreq {
> +       compatible = "hisilicon,hisi-acpu-cpufreq";
> +       hisilicon,coupled-clusters = <1>;
> +};

Such virtual nodes aren't allowed in DT.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-hisi-acpu.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-hisi-acpu.txt
new file mode 100644
index 0000000..547e7339
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-hisi-acpu.txt
@@ -0,0 +1,112 @@ 
+Hisilicon acpu cpufreq driver
+-----------------------------
+
+Hisilicon ACPU cpufreq driver for CPU frequency scaling.
+
+Required properties:
+- operating-points: Table of frequencies and voltage CPU could be transitioned
+	into. Frequency should be in KHz units and voltage should be in
+	microvolts; This must be defined under node /cpus/cpu@x. Where x is
+	the first cpu inside a cluster.
+
+Optional properties:
+- hisilicon,coupled-clusters: Specify whether all clusters share one clock
+	source. This must be defined under node cpufreq.
+
+Example 1: all clusters share one clock source
+----------------------------------------------
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x0>;
+		operating-points = <
+			/* kHz  uV */
+			1200000  0
+			960000   0
+			729000   0
+			432000   0
+			208000   0
+		>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x1>;
+	};
+
+	cpu@100 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x100>;
+	};
+
+	cpu@101 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x101>;
+	};
+};
+
+cpufreq {
+	compatible = "hisilicon,hisi-acpu-cpufreq";
+	hisilicon,coupled-clusters = <1>;
+};
+
+
+Example 2: every cluster has dedicated clock source
+---------------------------------------------------
+
+cpus {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	cpu@0 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x0>;
+		operating-points = <
+			/* kHz  uV */
+			1200000  0
+			960000   0
+			729000   0
+			432000   0
+			208000   0
+		>;
+	};
+
+	cpu@1 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x1>;
+	};
+
+	cpu@100 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x100>;
+		operating-points = <
+			/* kHz  uV */
+			1200000  0
+			960000   0
+			729000   0
+			432000   0
+			208000   0
+		>;
+	};
+
+	cpu@101 {
+		compatible = "arm,cortex-a53", "arm,armv8";
+		device_type = "cpu";
+		reg = <0x0 0x101>;
+	};
+};
+
+cpufreq {
+	compatible = "hisilicon,hisi-acpu-cpufreq";
+};