| Message ID | 1425138035-19715-1-git-send-email-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Eric, On Sat, Feb 28, 2015 at 12:40 PM, Fabio Estevam <festevam@gmail.com> wrote: > From: Fabio Estevam <fabio.estevam@freescale.com> > > imx25-pdk.dts provides a more complete support than the board file version, so > let's get rid of the board file. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Do you mind if I submit a patch removing the eukrea mx25 board files? If this is possible, then we can convert mx25 to a dt-only platform. Regards, Fabio Estevam
Hi Fabio, Le Sat, 28 Feb 2015 12:42:45 -0300, Fabio Estevam <festevam@gmail.com> a écrit : > On Sat, Feb 28, 2015 at 12:40 PM, Fabio Estevam <festevam@gmail.com> wrote: > > From: Fabio Estevam <fabio.estevam@freescale.com> > > > > imx25-pdk.dts provides a more complete support than the board file version, so > > let's get rid of the board file. > > > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > Do you mind if I submit a patch removing the eukrea mx25 board files? > > If this is possible, then we can convert mx25 to a dt-only platform. > no problem on our side, it was supposed to be removed after DT support for this board was accepted but it seems the patch was never sent ;-) Best regards, Eric
On Sat, Feb 28, 2015 at 12:40:35PM -0300, Fabio Estevam wrote: > From: Fabio Estevam <fabio.estevam@freescale.com> > > imx25-pdk.dts provides a more complete support than the board file version, so > let's get rid of the board file. > > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> It applies neither my branch nor v4.0-rc1. Can you please generate the patch against imx/soc branch? Shawn > --- > arch/arm/mach-imx/Kconfig | 15 --- > arch/arm/mach-imx/Makefile | 1 - > arch/arm/mach-imx/mach-mx25_3ds.c | 270 -------------------------------------- > 3 files changed, 286 deletions(-) > delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c > > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig > index e8627e0..aaea738 100644 > --- a/arch/arm/mach-imx/Kconfig > +++ b/arch/arm/mach-imx/Kconfig > @@ -151,21 +151,6 @@ config MACH_MX21ADS > > comment "MX25 platforms:" > > -config MACH_MX25_3DS > - bool "Support MX25PDK (3DS) Platform" > - select IMX_HAVE_PLATFORM_FLEXCAN > - select IMX_HAVE_PLATFORM_FSL_USB2_UDC > - select IMX_HAVE_PLATFORM_IMX2_WDT > - select IMX_HAVE_PLATFORM_IMXDI_RTC > - select IMX_HAVE_PLATFORM_IMX_FB > - select IMX_HAVE_PLATFORM_IMX_I2C > - select IMX_HAVE_PLATFORM_IMX_KEYPAD > - select IMX_HAVE_PLATFORM_IMX_UART > - select IMX_HAVE_PLATFORM_MXC_EHCI > - select IMX_HAVE_PLATFORM_MXC_NAND > - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX > - select SOC_IMX25 > - > config MACH_EUKREA_CPUIMX25SD > bool "Support Eukrea CPUIMX25 Platform" > select IMX_HAVE_PLATFORM_FLEXCAN > diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile > index 8d1b101..e92ede9 100644 > --- a/arch/arm/mach-imx/Makefile > +++ b/arch/arm/mach-imx/Makefile > @@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o > obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o > > # i.MX25 based machines > -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o > obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o > obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o > obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o > diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c > deleted file mode 100644 > index 0d01e36..0000000 > -- > 1.9.1 >
On Tue, Mar 3, 2015 at 11:54 AM, Shawn Guo <shawn.guo@linaro.org> wrote: > On Sat, Feb 28, 2015 at 12:40:35PM -0300, Fabio Estevam wrote: >> From: Fabio Estevam <fabio.estevam@freescale.com> >> >> imx25-pdk.dts provides a more complete support than the board file version, so >> let's get rid of the board file. >> >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> > > It applies neither my branch nor v4.0-rc1. Can you please generate the > patch against imx/soc branch? Sorry, I meant imx/cleanup branch. Shawn
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index e8627e0..aaea738 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -151,21 +151,6 @@ config MACH_MX21ADS comment "MX25 platforms:" -config MACH_MX25_3DS - bool "Support MX25PDK (3DS) Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMXDI_RTC - select IMX_HAVE_PLATFORM_IMX_FB - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select SOC_IMX25 - config MACH_EUKREA_CPUIMX25SD bool "Support Eukrea CPUIMX25 Platform" select IMX_HAVE_PLATFORM_FLEXCAN diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 8d1b101..e92ede9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o # i.MX25 based machines -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o